Dell PowerEdge 1855 Bedienungsanleitung

www.dell.com | support.dell.com

Dell™ PowerEdge™ 1855 Systems

Configuration Guide

配置指南

Guide de configuration

Konfigurationsanleitung

設定ガイド

구성 설명서

Guía de configuración

www.dell.com | support.dell.com

Dell™ PowerEdge™ 1855 Systems

Configuration Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, PowerEdge, PowerConnect, and Dell OpenManage are trademarks of Dell Inc.;

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names

or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

August 2005 P/N F3153 Rev. A02

Contents 3

Contents

1 General System Configuration

Other Documents You May Need . . . . . . . . . . . . . . . . . . . . . . 6

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Configuring Drive Mirroring With PERC 4/im Integrated RAID . . . . . . . . 9

Additional Integrated Mirroring Guidelines . . . . . . . . . . . . . . . 10

Configuring the DRAC/MC . . . . . . . . . . . . . . . . . . . . . . . . . 11

Enabling and Configuring the DRAC/MC to Use a Serial

or Telnet Console . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Configuring the System Setup Program on the Server Module . . . . . . 11

Assigning a Static Address to the BMC. . . . . . . . . . . . . . . . . 12

Configuring the Client System . . . . . . . . . . . . . . . . . . . . . 12

Enabling the Serial and/or Telnet Console on the DRAC/MC . . . . . . . 15

Enabling the Telnet Console . . . . . . . . . . . . . . . . . . . . . . 15

Connecting to the DRAC/MC Through the Local Serial Port

or Telnet Management Station (Client System) . . . . . . . . . . . . . 15

Using DRAC/MC Remote Access Features . . . . . . . . . . . . . . . 16

Updating the DRAC/MC Module Firmware . . . . . . . . . . . . . . . 16

Integrating the System Into the Network . . . . . . . . . . . . . . . . . . 17

Configuring the PowerConnect 5316M Ethernet Switch Module . . . . . . . 19

Updating the Switch Module Firmware . . . . . . . . . . . . . . . . . 21

Gb Pass-through Module. . . . . . . . . . . . . . . . . . . . . . . . . . 23

Gb Pass-through Module Link Negotiations. . . . . . . . . . . . . . . 23

Enabling PXE on a Gb Ethernet Daughter Card. . . . . . . . . . . . . . . . 24

4Contents

2 Configuring the KVM Switch Module

Basic KVM Switch Module. . . . . . . . . . . . . . . . . . . . . . . . . 25

Using a KVM Keyboard Sequence to Select Server Modules . . . . . . 25

Avocent Analog KVM Switch Module. . . . . . . . . . . . . . . . . . . . 26

Avocent Analog KVM and Avocent Digital Access KVM Switch

Modules–Configuring the KVM Using the Local Port. . . . . . . . . . . . . 26

Running OSCAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Assigning Server Module Names . . . . . . . . . . . . . . . . . . . 27

Viewing and Selecting Slots and Server Modules . . . . . . . . . . . . 27

Scanning Your System . . . . . . . . . . . . . . . . . . . . . . . . . 29

Changing the Display Behavior. . . . . . . . . . . . . . . . . . . . . 30

Setting Console Security . . . . . . . . . . . . . . . . . . . . . . . 31

OSCAR Navigation Summary. . . . . . . . . . . . . . . . . . . . . . 34

Avocent Digital Access KVM Module–Remote Operation . . . . . . . . . . 35

Configuring the Avocent Digital Access KVM Module . . . . . . . . . . 35

Accessing the Avocent Digital Access KVM Module through

the DRAC/MC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Using the Video Viewer . . . . . . . . . . . . . . . . . . . . . . . . 36

Using Virtual Media . . . . . . . . . . . . . . . . . . . . . . . . . . 39

General System Configuration 5

General System Configuration

This guide provides information on configuring your system and the server modules in your system.

Additional information is available from additional sources. See "Other Documents You May

Need."

Your system can include up to ten server modules (also known as "blades"). See Figure 1-1. Each

server module functions as an individual server encompassing up to two microprocessors, up to two

hard drives, and up to six memory modules.

NOTE: To ensure proper operation and cooling, all server module bays must be populated at all times

with either a module or with a blank.

Figure 1-1. System Front View

To function as a system, a server module is inserted into a chassis that supports power supplies,

fan modules, a management module (Dell™ Remote Access Controller/Modular Chassis

[DRAC/MC]), a keyboard/video/mouse (KVM) switch module, and at least one I/O module for

network connectivity (see Figure 1-2.) The power supplies, fans, DRAC/MC, and I/O modules are

shared resources for the server modules in the chassis. In addition, your system may also ship with

an optional external USB diskette drive and an optional external USB CD drive, which you can use

to set up and configure the server modules.

server

modules (10)

12345678910

6General System Configuration

www.dell.com | support.dell.com

NOTE: To ensure proper operation and cooling, all module bays must be populated at all times with

either a module or with a blank.

Figure 1-2. System Back View

Other Documents You May Need

The

Product Information Guide

provides important safety and regulatory information.

Warranty information may be included within this document or as a separate document.

• The

Rack Installation Guide

Rack Installation Instructions

included with your rack solution

describes how to install your system into a rack.

• The

Getting Started Guide

provides an overview of initially setting up your system.

• The

Installation and Troubleshooting Guide

describes how to troubleshoot the system

and install or replace system components.

• The Dell PowerEdge Expandable RAID Controller 4/im Integrated Mirroring Guide

describes using the integrated mirroring features.

• The

Dell OpenManage Baseboard Management Controller User’s Guide

provides detailed

information on using the BMC.

power supply

modules (4)

an mo

(2) P

ower

onnect

5316M

Ethernet switch module

Fibre

Channel

pass-

through

module

blanks (2)

KVM

module

DRAC/MC

module

I/O 1

blanks (2)

I/O 3

I/O 2

I/O 4

DRAC/MC

module

General System Configuration 7

• The Dell Remote Access Controller/Modular Chassis User’s Guide provides detailed

information on using the remote management features of the system.

• The

Dell OpenManage Server Assistant User’s Guide

provides detailed information on the

systems management software applications, as well as information on alternative upgrade

paths.

• The network switch module documentation describes the features and how to use the

network switch modules.

• Systems management software documentation describes the features, requirements,

installation, and basic operation of the software.

• Operating system documentation describes how to install (if necessary), configure,

and use the operating system software.

• Documentation for any components you purchased separately provides information to

configure and install these options.

• Updates are sometimes included with the system to describe changes to the system, software,

and/or documentation.

NOTE: Always check for updates on support.dell.com and read the updates first because they

often supersede information in other documents.

• Release notes or readme files may be included to provide last-minute updates to the system

or documentation or advanced technical reference material intended for experienced users

or technicians.

Initial Setup

Unpack the system and install it in a rack.

See the

Getting Started Guide

and

Rack Installation Guide

for more information.

Connect power to the power supplies.

NOTE: Dell recommends that you power up the chassis prior to inserting server modules if

Ethernet switch modules are installed. The Ethernet switch may take longer to boot than the server

modules, which may cause functions like PXE to fail due to the Ethernet switch not being fully

booted and ready to send packets.

Connect the keyboard, video, and mouse to the KVM module.

Figure 1-3 shows the basic cabling configuration for a KVM module.

8General System Configuration

www.dell.com | support.dell.com

Figure 1-3. KVM Module Basic Configuration

If required, configure the hard drives for RAID 1 or integrated mirroring. It is recommended

that you configure RAID 1 prior to installation of the operating system. See "Configuring

Drive Mirroring With PERC 4/im Integrated RAID" for more information.

NOTE: If you ordered your server module configured for RAID 1 from Dell, then your server module

is already configured.

If required, set up console redirection on the server module to either the BMC or to the

DRAC/MC module serial port in the server module System Setup program. See "Enabling

and Configuring the DRAC/MC to Use a Serial or Telnet Console."

NOTICE: To prevent possible network disruptions, ensure that you assign a static IP address, IP subnet

mask, and gateway to the BMC before connecting to the network. The assigned static BMC address

must match the LOM_1 address of one of the server modules. For more information on configuring and

using the BMC, see "Assigning a Static Address to the BMC."

mon

tor

keyboard

mouse

KVM

module

system

custom KVM

cable

Andere Handbücher für PowerEdge 1855

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell Dimension 2400 Series Bedienungsanleitung

Dell

Dell POWEREDGE DL385 Bedienungsanleitung

Dell

Dell External OEMR R320 Bedienungsanleitung

Dell

Dell DX6000G Bedienungsanleitung

Dell

Dell DR4000 Restore Manager Bedienungsanleitung

Dell

Dell PowerEdge 4600 Bedienungsanleitung

Dell

Dell PowerEdge 7250 Kurzanleitung

Dell

Dell POWEREDGE R710 Bedienungsanleitung

Dell

Dell PowerEdge FD332 Bedienungsanleitung

Dell

Dell PowerEdge R330 Bedienungsanleitung

Dell

Dell XC730xd Bedienungsanleitung

Dell

Dell PowerEdge T110 II Kurzanleitung

Dell

Dell Force10 MXL Blade Bedienungsanleitung

Dell

Dell PowerEdge SC420 Stücklistenhandbuch

Dell

Dell PowerEdge PDU Managed LED Bedienungsanleitung

Dell

Dell PowerEdge M620 Bedienungsanleitung

Dell

Dell Olympus O-T600 Handbuch

Dell

Dell PowerEdge R820 Kurzanleitung

Dell

Dell poweredge VRTX Bedienungsanleitung

Dell

Dell ECS EX Series Montageanleitung

Dell

Dell PowerEdge HR675 Bedienungsanleitung

Dell

Dell poweredge VRTX Bedienungsanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell PowerEdge 2420 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung