Dell PowerEdge FC830 Bedienungsanleitung

Dell PowerEdge FC830

Owner's Manual

Regulatory Model: E03B

Regulatory Type: E03B001

September 2020

Rev. A03

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be

trademarks of their respective companies.

Dell PowerEdge FC830 system overview

The Dell PowerEdge FC830 system is a full-height sled that is configured for the PowerEdge FX2/FX2s enclosure. The Dell

PowerEdge FC830 system supports up to:

●Four Intel Xeon E5-4600 v4 or v3 processors

●48 DIMMs

●Eight 2.5-inch hot-swappable hard drives or SSDs

●Sixteen 1.8-inch hot-swappable SSDs

Topics:

•Supported configurations for the PowerEdge FC830 system

•Front panel

•Using USB diskette or USB DVD or CD drives

•Diagnostic indicators on the front panel

•Locating Service Tag of your system

Supported configurations for the PowerEdge FC830

system

The Dell PowerEdge FC830 system supports the following configurations:

Dell PowerEdge FC830 system overview 3

Figure 1. Supported configurations for the Dell PowerEdge FC830 system

4Dell PowerEdge FC830 system overview

Front panel

The front panel provides access to the features available on the front of the server, such as the power button, status indicator,

management indicator, and USB ports. The diagnostic LEDs or the LCD panel is prominently located on the front panel. The

hot-swappable hard drives are accessible from the front panel.

Front panel view—2.5-inch hard drive or SSD system

Figure 2. Front panel view—2.5 inch hard drive or SSD system

Table 1. Front panel features and indicators—2.5-inch hard drive or SSD system

Item Indicator, Button, or

Connector

Icon Description

1 Hard drives or SSDs Eight 2.5-inch hot-swappable SAS/SATA/PCIe

SSDs or SAS/SATA hard drives.

2 USB port Enables you to connect USB devices to the sled.

3 USB management port or

iDRAC Direct port Enables you to connect USB devices to the sled

or provides access to the iDRAC Direct features.

For more information about iDRAC, see the iDRAC

Guide at Dell.com/idracmanuals.

4 Management indicator The management indicator glows when the iDRAC

controls the USB connector for management

functions.

5 Sled handle Used to slide the sled out of the enclosure.

6 Status indicator Indicates the status of the system.

7 Sled power-on indicator,

power button

The power-on indicator glows when the sled is

turned on. The power button controls the power

supply output to the system.

Dell PowerEdge FC830 system overview 5

Front panel view—1.8-inch SSD system

Figure 3. Front panel view—1.8-inch SSD system

Table 2. Front panel features and indicators—1.8-inch SSD system

Item Indicator, Button, or

Connector

Icon Description

1 SSDs Sixteen 1.8-inch hot-swappable SAS SSDs.

2 USB management port Enables you to connect USB devices to the sled.

3 USB management port or

iDRAC Direct port Enables you to connect USB devices to the sled

or provides access to the iDRAC Direct features.

For more information about iDRAC, see the iDRAC

Guide at Dell.com/idracmanuals.

4 Management indicator The management indicator glows when the iDRAC

controls the USB connector for management

functions.

5 Sled handle Used to slide the sled out of the enclosure.

6 Status indicator Indicates the status of the system.

7 Sled power-on indicator,

power button

The power-on indicator glows when the sled is

turned on. The power button controls the power

supply output to the system.

Using USB diskette or USB DVD or CD drives

The sled has USB ports on the front which allows you to connect a USB diskette drive, USB flash drive, USB DVD or CD drive,

keyboard, or mouse device. The USB drives can be used to configure the sled.

To designate the USB diskette drive as the boot drive:

1. Connect the USB drive

2. Restart the system

3. Enter System Setup

4. Set the drive as first in the boot sequence

The USB device is displayed in the Boot Order Setup screen only if it is attached to the system before you run the System

Setup. You can also select the boot device by pressing F11 during system start-up and selecting a boot device for the current

boot sequence.

6Dell PowerEdge FC830 system overview

Diagnostic indicators on the front panel

Hard drive or SSD indicator patterns

The hard drive or SSD (Solid-State Drives) indicators display different patterns as drive events occur in the system.

NOTE: The sled must have a hard drive or SSD or a hard drive blank installed in each drive bay.

Figure 4. Hard drive or SSD indicators

1. drive activity indicator (green)

2. drive status indicator (green and amber)

NOTE: If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not

function and remains off.

Table 3. Drive status indicator codes

Drive-status indicator pattern Condition

Flashes green twice per second Identifying drive or preparing for removal.

Off Drive ready for insertion or removal.

NOTE: The drive status indicator remains off until all hard

drives are initialized after the system is turned on. Drives are

not ready for insertion or removal during this time.

Flashes green, amber, and turns off Predicted drive failure

Flashes amber four times per second Drive failed

Steady green Drive online

Flashes green for three seconds, amber for three

seconds, and turns off after six seconds

Rebuild aborted

iDRAC Direct LED indicator codes

NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.

Dell PowerEdge FC830 system overview 7

Figure 5. iDRAC Direct LED indicator

1. iDRAC Direct status indicator

The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management

port (USB XML Import).

Table 4. iDRAC Direct LED indicator

Convention iDRAC Direct LED

indicator

Condition

A Green Turns green for a minimum of two seconds to indicate the start and end of a file

transfer.

B Flashing green Indicates file transfer or any operation tasks.

C Green and turns off Indicates that the file transfer is complete.

D Not lit Indicates that the USB is ready to be removed or that a task is complete.

The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and

cable (Laptop Connect):

Table 5. iDRAC Direct LED indicator

iDRAC Direct LED

indicator

Condition

Solid green for two

seconds

Indicates that the laptop is connected.

Flashing green (on for

two seconds and off for

two seconds)

Indicates that the laptop connected is recognized.

Turns off Indicates that the laptop is unplugged.

Locating Service Tag of your system

Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag

are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the

chassis of the system. This information is used by Dell to route support calls to the appropriate personnel.

8Dell PowerEdge FC830 system overview

Documentation resources

This section provides information about the documentation resources for your system.

Table 6. Additional documentation resources for your system

Task Document Location

Setting up your system For information about installing the system into

a rack, see the Rack documentation included

with your rack solution.

Dell.com/poweredgemanuals

For information about turning on the system

and the technical specifications of your

system, see the Getting Started With Your

System document that is shipped with your

system.

Dell.com/poweredgemanuals

Configuring your system For information about iDRAC features,

configuring and logging in to iDRAC, and

managing your system remotely, see the

Integrated Dell Remote Access Controller

User's Guide.

Dell.com/idracmanuals

For information about installing the

operating system, see the operating system

documentation.

Dell.com/operatingsystemmanuals

For information about understanding

Remote Access Controller Admin (RACADM)

subcommands and supported RACADM

interfaces, see the RACADM Command Line

Reference Guide for iDRAC.

Dell.com/idracmanuals

For information about updating drivers and

firmware, see the Methods to download

firmware and drivers section in this document.

Dell.com/support/drivers

Managing your system For information about systems management

software offered by Dell, see the Dell

OpenManage Systems Management Overview

Guide.

Dell.com/openmanagemanuals

For information about setting up, using,

and troubleshooting OpenManage, see the

Dell OpenManage Server Administrator User’s

Guide.

Dell.com/openmanagemanuals

For information about installing, using, and

troubleshooting Dell OpenManage Essentials,

see the Dell OpenManage Essentials User’s

Guide.

Dell.com/openmanagemanuals

For information about installing and using Dell

System E-Support Tool (DSET), see the Dell

System E-Support Tool (DSET) User's Guide.

Dell.com/DSET

For information about installing and using

Active System Manager (ASM), see the Active

System Manager User’s Guide.

Dell.com/asmdocs

Documentation resources 9

Table 6. Additional documentation resources for your system

Task Document Location

For understanding the features of Dell

Lifecycle Controller (LCC), see the Dell

Lifecycle Controller User’s Guide.

Dell.com/idracmanuals

For information about partner programs

enterprise systems management, see the

OpenManage Connections Enterprise Systems

Management documents.

Dell.com/

omconnectionsenterprisesystemsmanagement

For information about connections and client

systems management, see the OpenManage

Connections Client Systems Management

documentation.

Dell.com/dellclientcommandsuitemanuals

For information about viewing inventory,

performing configuration and monitoring

tasks, remotely turning on or off servers,

and enabling alerts for events on servers

and components using the Dell Chassis

Management Controller (CMC), see the CMC

User’s Guide.

Dell.com/esmmanuals

Working with Dell

PowerEdge RAID controllers

For information about understanding the

features of the Dell PowerEdge RAID

controllers (PERC) and deploying the

PERC cards, see the Storage controller

documentation.

Dell.com/storagecontrollermanuals

Understanding event and

error messages

For information about checking the event

and error messages generated by the system

firmware and agents that monitor system

components, see the Dell Event and Error

Messages Reference Guide.

Dell.com/openmanagemanuals > OpenManage

software

10 Documentation resources

Andere Handbücher für PowerEdge FC830

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge 1750 Bedienungsanleitung

Dell

Dell PowerEdge XR4510c Handbuch

Dell

Dell PowerVault DL2300 Bedienungsanleitung

Dell

Dell PowerEdge R210 Bedienungsanleitung

Dell

Dell DR4300 Bedienungsanleitung

Dell

Dell PowerEdge R610 Bedienungsanleitung

Dell

Dell PowerEdge R830 Bedienungsanleitung

Dell

Dell PowerEdge R415 Bedienungsanleitung

Dell

Dell PowerEdge 4200 Series Bedienungsanleitung

Dell

Dell PowerEdge systems 6300 Stücklistenhandbuch

Dell

Dell W-Series Bedienungsanleitung

Dell

Dell XC6320 Bedienungsanleitung

Dell

Dell DR4300 Bedienungsanleitung

Dell

Dell PowerEdge R820 Kurzanleitung

Dell

Dell EMC PowerProtect DD6400 System Bedienungsanleitung

Dell

Dell EMC PowerEdge R550 Handbuch

Dell

Dell PowerEdge R420 Kurzanleitung

Dell

Dell PowerEdge EMT Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

Dell

Dell PowerEdge UPS 500T Bedienungsanleitung

Dell

Dell PowerEdge 2800 Bedienungsanleitung

Dell

Dell PowerEdge T710 Bedienungsanleitung

Dell

Dell PowerEdge 750 Technisches Handbuch

Dell

Dell Poweredge metered Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch