Dell PowerEdge R905 Bedienungsanleitung

Dell™ PowerEdge™

R905 Systems

Getting Started

With Your System

Guide de mise en route

Primeiros passos com o sistema

Procedimientos iniciales con el sistema

Dell™ PowerEdge™

R905 Systems

Getting Started

With Your System

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden.

Trademarks used in this text: Dell, the DELL logo and PowerEdge are trademarks of Dell Inc.; AMD,

AMD Opteron and combinations thereof are trademarks of Advanced Micro Devices, Inc.; Microsoft,

WindowsandWindowsServerareeithertrademarksorregisteredtrademarksofMicrosoftCorporation

in the United States and/or other countries; Red Hat and Enterprise Linux are registered trademarks

ofRedHat,Inc.;SUSEisaregisteredtrademarkofNovell,Inc.intheUnitedStatesandothercountries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model EMMA

December 2007 P/N CR315 Rev. A00

Getting Started With Your System 3

System Features

This section describes the major hardware and software features of your

system. It also provides information about other documents you may

need when setting up your system and how to obtain technical assistance.

• Two or four dual-core or quad-core AMD Opteron™ 8000 Series

processors.

• A minimum of 2 GB (dual-processor systems) or 4 GB (four-processor

systems) of 667-MHz DDR2 memory modules. Memory is upgradable

to a maximum of 128 GB (256 GB when 8-GB memory modules are

available) by installing combinations of 512-MB, 1-GB, 2-GB, 4-GB,

or 8-GB (when available) memory modules in the 32 memory module

sockets (8 per processor) on the system board and Processor Expansion

Module (PEM).

• 800-MHZ DDR2 memory modules are supported in restricted

configurations.

• An optional slim-line SATA DVD-ROM drive, slim-line SATA DVD-RW

drive, or a combination CD-RW/DVD drive (when available).

NOTE: DVD devices are data only.

• Support for up to five 3.5-inch hot-plug SAS hard drives or up to eight

2.5-inch hot-plug SAS hard drives.

• An optional external USB diskette drive.

• An optional external USB optical drive.

• Two hot-pluggable, 1100W high efficiency power supplies in a 1 + 1

redundant configuration. The power supplies support an input voltage

range from 100 V to 240 V.

• Four hot-pluggable system cooling fans.

The system board provides the following features:

• The baseboard has CPU 1 and CPU 2 sockets with 16 DIMM slots.

• CPU 3 and CPU 4 and their 16 DIMM slots are on a separate PEM.

• Dedicated PCIe slot for a SAS controller.

4Getting Started With Your System

• Two x8 lane-width PCI-Express (PCIe) expansion slots and five x4 lane-

width PCIe slots.

• Four integrated Gb Ethernet NICs, capable of supporting 10-Mbps,

100-Mbps, and 1000-Mbps data rates. Each NIC also supports TCP/IP

offload engine (TOE) and iSCSI boot functionality. Two of the integrated

NICs are on a daughter card that can be upgraded to 10Gb Ethernet.

• An integrated Trusted Platform Module (TPM) version 1.2 used for

security applications, capable of generating and storing keys and storing

passwords and digital certificates. (Not available in China.)

• Four external USB 2.0-compliant ports, capable of supporting a diskette

drive, an optical drive, a keyboard, a mouse, or a USB flash drive.

• One internal USB 2.0-compliant connector.

• One internal connector for an optional flash memory card.

• Systems management circuitry that monitors operation of the system

fans as well as critical system voltages and temperatures. The systems

management circuitry works in conjunction with the systems management

software.

• Standard Baseboard Management Controller (BMC) with serial access.

• An optional remote access controller (RAC) card for remote systems

management.

•

An integrated VGA-compatible video subsystem based on an integrated

ATI RN50 33-MHz PCI

video controller. The video subsystem includes

16 MB of graphics memory and supports various 2D graphics video

modes. Maximum resolution is 1600x1280 with 65,536 colors.

(

When the optional RAC is installed, the integrated video subsystem

is disabled and the video controller on the RAC is used instead.)

• Front-panel support for a video connector, two USB connectors,

and a 1x5 LCD panel for system ID and error messaging.

• Back-panel connectors including one serial, one video, two USB,

and four NIC connectors.

• System ID button on the front and back panels.

For more information about specific features, see “Technical Specifications”

on page 10.

Getting Started With Your System 5

Supported Operating Systems

Your system supports the following operating systems:

• Microsoft

Windows Server

2003 R2 Standard and Enterprise Editions

(SP1 and later)

• Microsoft Windows Server 2003 R2 Standard and Enterprise x64 Editions

(SP1 and later)

•RedHat

Enterprise

Linux Server 5 AP (x86)

• Red Hat Enterprise Linux Server 5 AP (x86_64)

• Red Hat Enterprise Linux Server AS (Version 4.5) (x86)

• Red Hat Enterprise Linux Server AS (Version 4.5) (x86_64)

•SUSE

Linux Enterprise Server 10 (x86_64)

• VMware ESX Server 3 (including embedded versions)

NOTE: For the latest information on supported operating systems,

see www.dell.com.

Other Information You May Need

CAUTION: The Product Information Guide provides important safety and

regulatory information. Warranty information may be included within this

document or as a separate document.

• The

Rack Installation Guide

Rack Installation Instructions

included

with your rack solution describes how to install your system into a rack.

• The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install or

replace system components. This document may be found on the CDs

that came with your system or at

support.dell.com

• CDs included with your system provide documentation and tools

for configuring and managing your system.

6Getting Started With Your System

• Updates are sometimes included with the system to describe changes

to the system, software, and/or documentation.

NOTE: Always check for updates on support.dell.com and read the updates

first because they often supersede information in other documents.

• Release notes or readme files may be included to provide last-minute

updates to the system or documentation or advanced technical reference

material intended for experienced users or technicians.

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system

does not perform as expected, see your Hardware Owner’s Manual.

Dell Enterprise Training and Certification is available; see

www.dell.com/training for more information. This service may not

be offered in all locations.

Installation and Configuration

CAUTION: Before performing the following procedure, read and follow the safety

instructions and important regulatory information in your Product Information

Guide.

This section describes the steps to set up your system for the first time.

Unpacking the System

Unpack your system and identify each item.(Your system may not include

the optional rack kit and bezel shown here.)

Keep all shipping materials in case you need them later.

Getting Started With Your System 7

Installing the System in a Rack

Install the system in the rack once you have read the “Safety Instructions”

located in the rack installation documentation for your system.

See your rack installation documentation for instructions on installing

your system in a rack.

Connecting the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

8Getting Started With Your System

The connectors on the back of your system have icons indicating which cable

to plug into each connector. Be sure to tighten the screws (if any) on the

monitor's cable connector.

NOTE: If you simultaneously connect two monitors to the system, using the front

and back video connections, the video will default to the front since only one

display can operate at a time.

Connecting the System and Monitor Power Cables

Connect the monitor's power cable to the monitor (optional). Connect the

system’s power cables to the system.

Plug the other end of the power cables into a grounded electrical outlet or

a separate power source such as an uninterrupted power supply (UPS) or a

power distribution unit (PDU). If possible, connect the power supplies to two

different 110V power sources or two different 220V power sources, depending

on the power sources used.

Andere Handbücher für PowerEdge R905

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge SP 575-2 Leitfaden

Dell

Dell EMC PowerEdge C4140 Handbuch

Dell

Dell PowerEdge T310 Bedienungsanleitung

Dell

Dell PowerEdge C8000 Bedienungsanleitung

Dell

Dell PowerApp 220 Bedienungsanleitung

Dell

Dell DX6012S Bedienungsanleitung

Dell

Dell PowerEdge T310 Kurzanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell KY0730481 Installationshandbuch

Dell

Dell Force10 MXL Blade Bedienungsanleitung

Dell

Dell PowerEdge 2800 Bedienungsanleitung

Dell

Dell PowerEdge systems 6300 Bedienungsanleitung

Dell

Dell OptiPlex FX170 Bedienungsanleitung

Dell

Dell PowerEdge R910 Bedienungsanleitung

Dell

Dell Wyse Enhanced Ubuntu Linux T50 Bedienungsanleitung

Dell

Dell 100 Series Handbuch

Dell

Dell PowerEdge 4200 Series Bedienungsanleitung

Dell

Dell PowerEdge C5220 Bedienungsanleitung

Dell

Dell EMC PowerProtect DD6400 System Bedienungsanleitung

Dell

Dell POWEREDGE 1900 Service-Handbuch

Dell

Dell PowerEdge R730 Bedienungsanleitung

Dell

Dell PowerEdge R820 Bedienungsanleitung

Dell

Dell PowerEdge M630 Bedienungsanleitung

Dell

Dell DX6000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch