DeLOCK 90550 Bedienungsanleitung

Product-No: 90550

User manual no: 90550-a

www.delock.com

User manual

Bedienungsanleitung

2.4 GHz Barcode Scanner 1D and 2D

with charging station - multilingual

-2-

English

Description

This barcode scanner by Delock can be wirelessly connected to a PC or laptop.

All common 1D and 2D barcode types can be precisely captured even at long

distances. Additionally, the scanner recognizes barcodes displayed on displays

and monitors.

Automatic adaptation to ambient brightness

The scanner automatically adapts to the ambient brightness and captures up to

200 scans per second under optimal lighting conditions.

In low ambient brightness, the barcode is illuminated by an additional white LED

and can therefore also be used in poor lighting conditions.

Charging station acts as interface

The data transfer of the scanned barcodes is done via the 2.4 GHz frequency

band. In addition to charging the hand scanner, the scanner‘s charging station

also functions as a 2.4 GHz interface and is connected to the system via USB

cable.

Using an optional adapter cable, it is possible to connect the charging station to a

smartphone or tablet.

Specication

• Connector: 1 x USB 2.0 Type-B female

• Rechargeable battery: Li-Polymer battery 2000 mAh

• Decoding chip: ARM Cortex 32 Bit

• Resolution: max. 640 x 480

• Trigger: scan button

• Reading distance: ca. 40 mm to 250 mm

• Reading accuracy: 5 - 10 mil

• Range:

indoor area: up to 60 m

outdoor area: up to 100 m

• Internal memory: 16 MB

• Light colour: visible LED red

• Compensation light: LED white

• Sensor: linear CMOS image sensor

• Scan rate: up to 200 scans per second

• Scan angle: 60°

• Surrounding brightness: max. 100000 Lux

• Input voltage: 3.3 V

-3-

English

• Current consumption:

operation: max. 120 mA

standby: max. 500 mA

• Operating temperature: -20 °C ~ 60 °C

• Storage temperature: -40 °C ~ 70 °C

• Relative humidity: 5 - 95 % (non condensing)

• Colour: black

• Weight:

barcode scanner: ca. 146 g

charging cradle: ca. 118 g

• Dimensions (LxWxH):

barcode scanner: ca. 16.5 x 8.2 x 6.5 cm

charging cradle: ca. 12.0 x 9.5 x 8.0 cm

• Cable length without connectors: ca. 1 m

• 2.4 GHz

• Scancodes:

Codabar, Code 128, Code 39, EAN-8 / EAN-13, ISBN - 13, Data Matrix,

PDF417, QR Code

• Supported languages:

German, English, French, Italian, Swiss German, Swiss French, Portugese,

Finnish, Czech, Hungarian, Danish, Polish

System requirements

• Android 9.0 or above

• Chrome OS

• iPad Pro (2018)

• Linux Kernel 5.4 or above

• Mac OS 10.15.6 or above

• Windows 8.1/8.1-64/10/10-64/11

• PC or laptop with a free USB Type-A port for charging station

Package content

• Barcode scanner

• USB 2.4 GHz charging station

• USB charging cable, user manual

Safety instructions

• Protect the product against moisture

• Protect the product against direct sunlight

• Do not look directly into the LED diode of the scanner

-4-

English

Charge battery

You can charge the scanner‘s battery by using the charging station. For this

purpose, the station must be connected to the system via USB cable. Then place

the scanner in the holder provided for this purpose.

Beep tones

5 melodical beeps Scanner is active

One short beep The scanner successfully reads the scanned barcode

Three short beeps The scanner reads a barcode although it is not connec-

ted

or the scanner has successfully established the connec-

tion after the reset

One long beep Out of range, bad connection

or device switches o󰀨

Connecting the scanner to the system

To connect the scanner to the system, please connect the cable to the computer

(USB-A socket), push scanner button and the code below. After successful con-

nection you will hear two beeps.

Match

If your scanner does not output any values after scanning, please check the

connection to the computer, - as well as the battery level.

If the battery is very low, the scanner cannot read any scans. -

And then connect the scanner to the computer. After a successful connection you

will hear two beeps.

Reset scanner to factory settings

To reset the scanner to its factory settings, please scan the codes below in

sequence. After the second code the scanner switches o󰀨, please wake up by

button push and go forward. After a successful connection, the scanner should

emit two beeps.

Important: After the scans, give the scanner a little time (1-2 seconds) to

process the codes internally.

-5-

English

1. Reset

2. Wireless restore

should turn o󰀨 -wake up by pushing scanner button

3. Match

Scan Mode

The scanner has three di󰀨erent scanning modes.

Continuous scanning, where the scanner stays on, auto scanning, where the

scanner detects when a barcode is in the reading range, and normal mode,

scanning at the touch of a button.

For normal mode please scan the following code

For the continuous mode scan this code

And for the autoscan mode, see below

-6-

English

Shutdown

Change language settings

You can choose between below languages. First please scan „Western Europe“

than your language

Western Europe

German

English

French

Italian

Spanish

-7-

English

Swiss (German)

Swiss (French)

Portuguese

Finnish

Czech

Hungarian

Danish

Polish

-8-

English

Data transfer from the memory mode

If you are outside the transmission range to the base station and the connected

system, you can save the scanned codes to the internal memory using the code

below:

Using the code below you can then enter the internal memory mode.

The total amount of the memory is recorded by the following barcode.

You can now upload the stored data by scanning the barcode below.

Please make sure that you are in the reception area of your USB device and that

an ideal connection has been established.

To delete the internal memory afterwards, you can use the following code.

You can return to normal mode with the following code.

-9-

English

Transmission speed

Select the transmission speed according to the PC reception speed.

fast

slow

Terminator setting

Clear terminator Add tab terminator

Add return terminator Add carriage return and line feed

(double carriage return)

-10-

English

Case conversation

All case

Case is not converted

Case reversal

Full capital case

ID setting

„ID display“/“ID hide“ is to set directly. To edit ID, scan „Edit ID“ and then scan

„digital barcodes“ (from 0~9). After editing successfully, the buzzer will sound 2

times.

Notice: There is a space between ID and barcode data.

ID Display

*ID HIDE

EDIT ID

Inhaltsverzeichnis

Sprachen:

Andere DeLOCK Barcode-Lesegerät Handbücher

DeLOCK

DeLOCK 90600 Anleitung zur Verwendung

DeLOCK

DeLOCK 90562 Bedienungsanleitung

DeLOCK

DeLOCK 90508 Bedienungsanleitung

DeLOCK

DeLOCK 90586 Bedienungsanleitung

DeLOCK

DeLOCK 90507 Bedienungsanleitung

DeLOCK

DeLOCK 90557 Bedienungsanleitung

DeLOCK

DeLOCK 90518 Bedienungsanleitung

DeLOCK

DeLOCK 90518 Bedienungsanleitung

DeLOCK

DeLOCK 90280 Bedienungsanleitung

DeLOCK

DeLOCK 90564 Bedienungsanleitung

DeLOCK

DeLOCK 90556 Bedienungsanleitung

DeLOCK

DeLOCK 90518 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung