Delta Controls CON-MBUS Benutzerhandbuch

CON-MBUS

Application Guide

Edition 1.4

Page 2 of 48 CON-MBUS Application Guide

Document Edition 1.4

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval

system or translated into any language (natural or computer), in any form or by any means,

without the prior written permission of Delta Controls Inc.

Limited permission is granted to reproduce documents released in Adobe Portable Document

Format (PDF) electronic format in paper format. Documents released in PDF electronic format

may be printed by end users for their own use using a printer such as an inkjet or laser device.

Authorized distributors of Delta Controls Inc. products (Delta Partners) may print PDF

documents for their own internal use or for use by their customers. Authorized Delta Partners

may produce copies of released PDF documents with the prior written permission of Delta

Controls Inc.

Information in this document is subject to change without notice and does not represent a

commitment to past versions of this document on the part of Delta Controls Inc. Delta Controls

Inc. may make improvements and/or changes to this document /the associated software/or

associated hardware at any time.

BACspec, BACstat, the Delta logo, ORCAview, ORCAweb, Earthright, enteliWEB, enteliBUS,

enteliMESH, enteliTOUCH, enteliZONE, enteliSTAT, enteliVIZ and Virtual Stat are registered

trademarks of Delta Controls Inc.

Microsoft Windows is a registered trademark of Microsoft Corporation in the United States

and/or other countries.

All other trademarks are the property of their respective owners.

Document Edition: 1.4

CON-MBUS Application Guide Page 3 of 48

Document Edition 1.4

Contents

Product Description....................................................................................................................5

Application ..............................................................................................................................5

About M-Bus ...........................................................................................................................6

Terminology ............................................................................................................................6

CON-MBUS Product Models ....................................................................................................6

Important Information................................................................................................................7

Cautions and Warnings ...........................................................................................................7

Typical Network Architecture with CON-MBUS..........................................................................8

Example 1: Star M-Bus Network .............................................................................................9

Example 2: Daisy Chain M-Bus Network ...............................................................................10

Principles of Operation.............................................................................................................11

CON-MBUS Product Layout ...................................................................................................11

Power over M-Bus Network ..................................................................................................12

Supported M-Bus Meters ......................................................................................................12

How to Integrate the CON-MBUS..............................................................................................13

Main Steps to Integrate the CON-MBUS ................................................................................13

Step 1: Upgrading the Delta Controller with Customized Firmware......................................13

Step 2: Installing the Customized Object Dialogs on OWS .....................................................14

Saving the customized GWT dialog for Version 3.33 .................................................................................. 14

Saving the customized GWT and GW dialogs for Version 3.40 ................................................................... 14

Step 3: Connecting and Configuring the CON-MBUS .............................................................15

To configure the CON-MBUS: ..................................................................................................................... 16

Step 4: Adding a Meter to the Network..................................................................................17

Role of the Gateway Translation object...................................................................................................... 17

Obtaining the primary meter address ........................................................................................................ 17

Creating the GWT object and adding a meter to the network .................................................................... 19

Addressing a Meter ...............................................................................................................19

To add a meter to the network: .................................................................................................................. 19

Set GCL Wait Time for Meter Queries....................................................................................20

Step 5: Choosing How to Configure the GWT Object to Translate Meter Data........................21

Step 6: Configuring the GWT Object Obtained from the CON-MBUS Product Page ................21

Creating the BACnet objects ...................................................................................................................... 22

Contents

Page 4 of 48 CON-MBUS Application Guide

Document Edition 1.4

Step 7: Configuring the GWT Object that You Created ...........................................................22

About the GWT object translation programming fields.............................................................................. 22

About the GWT Reliability Timer setting and status alarming ................................................................... 24

Configuring data translation and BACnet objects..................................................................24

Sontex Supercal 531 data elements for first two pages only..................................................................... 25

Example 1: Configuring the Sontex Supercal 531 for a power consumption application using an existing

GWT as a template...................................................................................................................................... 27

Example 2: Configuring the Sontex Supercal 539 for a cooling coil application by creating a new GWT... 30

Sontex Supercal 539 data elements for first page only. ............................................................................ 30

BACnet Objects: Naming Scheme for Objects........................................................................34

Available BACnet Objects ......................................................................................................34

Tables of Supported BACnet Objects and Addressing Schemes ............................................35

3.33 R2 and R3 Firmware ........................................................................................................................... 36

3.40 R1 Firmware ....................................................................................................................................... 36

3.40 R2 and R3 Firmware ........................................................................................................................... 39

Managing GWT Object Configurations ......................................................................................41

Saving the GWT Object...........................................................................................................41

Loading the GWT Object ........................................................................................................42

Removing a Meter from the Network ....................................................................................42

Troubleshooting .......................................................................................................................43

CON-MBUS Status Indicators Table ......................................................................................45

Document Revision History ......................................................................................................46

CON-MBUS Application Guide Page 5 of 48

Document Edition 1.4

Product Description

The CON-MBUS is a level converter used to bring data from M-Bus (Meter-Bus) products into a

BACnet controller. The CON-MBUS can be used with any Delta Controls product that has an

available MS/TP port. The CON-MBUS is capable of supplying power to the meters and can

support up to 150 meters.

The CON-MBUS brings the M-Bus protocol directly into DAC,DSC and enteliBUS controllers.

The mapped data from a meter comes in through a Gateway Translation (GWT) object. The

GWT object instance matches the meter address so that it is clear which meter is

communicating with the CON-MBUS. Required BACnet objects such as AV, BV, BI, AI objects

are automatically created when the data is mapped into the GWT object.

Application

The CON-MBUS brings M-Bus meters into a BACnet network. One CON-MBUS can

communicate with up to 150 M-Bus meters. The information from the meters can be

customized and mapped into BACnet objects through a gateway object and thus providing the

ability to view only specific information from the meters. The update time for the meters is

adjustable to suit a variety of installations

The M-Bus protocol was developed to fill the need for a system for the networking and remote

reading of utility meters. For example, the consumption of gas, water or electricity in the home

can be measured. M-Bus fulfills the special requirements of remotely powered or battery

driven systems, including consumer utility meters. When interrogated, the meters deliver the

collected data to a common master. At periodic intervals, a hand-held computer, or a control

system could read all the utility meters of a building.

Product Description

Page 6 of 48 CON-MBUS Application Guide

Document Edition 1.4

About M-Bus

The M-Bus® (Meter Bus) allows remote reading of consumption meters such as gas, water,

heat or electricity meters. The M-Bus communicates over two wires and is a low-cost solution.

M-Bus is a European standard: EN 13757-2 physical and link layer, EN 13757-3 application

layer. The standard is defined on http://www.m-bus.com/

Terminology

M-Bus refers to the Meter-Bus protocol standard.

CON-MBUS refers to the level converter product manufactured by Delta Controls that allows

communication between a BACnet controller and M-Bus meters . We avoid using M-Bus or

MBUS to refer to the CON-MBUS.

Gateway refers to the software special interface that is flash loaded into the host

eBCON/DAC/DSC controller. The gateway is viewed as a purely software entity.

Meter ID# refers to the unique ID assigned to a meter by the manufacturer. With CON-MBUS

software, this information is displayed in the Description tab of the GW object. For example, a

Meter Id# might be 10510405

Primary Address refers to the network address assigned to the meter in the factory. The

meter documentation includes address information. A new meter from the factory generally

has a primary address of 0. Primary addresses are in the range of 1 – 250.

Secondary Address refers to the physical address assigned to the meter. It provides a way to

search for a meter even though they all have the same primary address. The primary address

can be changed if the meter supports secondary addressing. Delta Controls products do not

support secondary addressing.

CON-MBUS Product Models

The CON-MBUS is available in the several models that support different numbers of M-Bus

meters. For details, see the CON-MBUS catalog sheet found on the CON-MBUS product page

on George.

CON-MBUS Application Guide Page 7 of 48

Document Edition 1.4

Important Information

Find these documents on the CON-MBUS product page on George.

•CON-MBUS Application Guide

•CON-MBUS Catalog Sheet

•CON-MBUS Release Notes

•CON-MBUS Installation Guide

•Delta Controls Wiring and Installation Guidelines

Cautions and Warnings

These controllers are electrostatic-sensitive devices. Proper ESD protection

(ground strap) should be used when installing this product so that damage to

the product does not occur. Equipment damage or loss of data may occur if

these procedures are not followed as specified.

Installations requiring CE conformance: All wiring for CE rated products must

use a separated extra low voltage (SELV) or protective extra low voltage (PELV)

transformer. Use safety-isolating transformers, (Class II transformer) per

EN61558. The transformer must be rated for 100% duty cycle.

Typical Network Architecture with CON-MBUS

Page 8 of 48 CON-MBUS Application Guide

Document Edition 1.4

Typical Network Architecture with CON-MBUS

Ethernet

M-Bus network

Maximum 150 meters

M-Bus network

Maximum 150 meters

M-Bus network

Maximum 150 meters

CON-MBUS Application Guide Page 9 of 48

Document Edition 1.4

Example 1: Star M-Bus Network

Maximum Total Wire Length of all

network segments combined is

1000 m (3280 ft)

Maximum length of

each network segment is

350 m (1148 ft)

Network

Segment

CON-MBUS Network

Segment

Network

Segment

Typical Network Architecture with CON-MBUS

Page 10 of 48 CON-MBUS Application Guide

Document Edition 1.4

Example 2: Daisy Chain M-Bus Network

CON-MBUS

Network

Segment

Maximum Total Wire Length of all

network segments combined is

1000 m (3280 ft)

Maximum length of each network segment is

350 m (1148 ft)

Network

Segment

Network

Segment

Network

Segment

Inhaltsverzeichnis

Andere Delta Controls Medienkonverter Handbücher

Delta Controls

Delta Controls CON-768 Benutzerhandbuch

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung