Delta-Opti RG-EST350-V2 Bedienungsanleitung

Manufactured in China for:

DELTA-OPTI Monika Matysiak,

60-713 Poznan, 10 Graniczna St., Poland

www.shopdelta.eu

RG-EST350-V2 Wireless Bridge User Manual

Note

The device and software may update without prior notification. Please

contact Ruijie technical support for details.

Package Contents

Management software WSP-EST350 V2 has been installed on the device.

Part Description

Qty

RG-EST350 V2 Wireless Bridges

Phillips Pan Head Screws (ST4.2X19)

Hose Clamps

Mounting Brackets

Universal Joint Assemblies

Universal Joint Nuts

RG-EST350 V2 Product Manual

24V/0.5A PoE Power Adapters

Wall Anchors

Power Cord

Warranty Card

Before You Begin

Networking

LED & Ports

Description

1. LED

a. SYS LED

Blinking: The system is initializing, restoring factory settings,

LED & Ports

Camera

Camera - Switch (Optional) - Camera End

NVR End – Switch - NVR

Switch

NVR

upgrading or resetting.

On: The device is working properly.

Off: The device is not powered on.

b. LAN1/LAN2 LED

Off: The LAN port is not connected.

Blinking Green: Link is up. The port is sending or receiving data.

Solid Green: Link is up. The port is not sending or receiving data.

c. Signal LED (STR1/STR2/STR3)

STR1 Blinking/On: The device is bridged.

STR1 On: RSSI > -75 dBm

STR1 On + STR2 Blinking: RSSI > -73 dBm

STR1 On + STR2 On: RSSI > -71 dBm

STR1 On + STR2 On + STR3 Blinking: RSSI > -68 dBm

STR1 On + STR2 On + STR3 On: RSSI > -64 dBm

2. 12V DC Port

RG-EST350 V2 adopts 12 V/1 A DC power supply.

3. LAN2

4. LAN1/PoE Port

RG-EST350 V2 adopts 24 V/0.5 A PoE power supply.

5. Reset Button

Press the button for 2 seconds, and the device will be rebooted.

Press the button for over 5 seconds, and the device will restore the

factory settings.

NVR End

Camera End

Plugging the Ports

LAN1/PoE Port

PoE Power Adapter

PoE Max Distance: 100m (Cat5e/6/6a/7/8 Cable)

LAN1/PoE Port

PoE Power Adapter

PoE Max Distance: 100m (Cat5e/6/6a/7/8 Cable)

Pole Mounting

Wall Mounting

Installing the Device

Drill holes into the

marked positions and

insert wall anchors.

Adjust the orientation.

Secure the device on a

pole by using a hose

clamp.

Assemble the mount

kit.

Assemble the mount

kit.

Adjust the orientation.

App Management (Recommended)

The wireless bridges are used in pairs without extra configuration. You

can scan the following QR code to download an App to manage the

bridges.

Navigate to Project > + Create a Project > Scan QR-code to manage

the device.

Web Management

Connect to the SSID (Default: @Ruijie-bxxx. xxxx indicates the last four

digits of the MAC address) or plug an Ethernet cable into the LAN port,

and then visit http://10.44.77.254. It is recommended to set the IP address

of computer to 10.44.77.250.

Managing the Device

Inhaltsverzeichnis

Andere Delta-Opti Netzwerk-Hardware Handbücher

Delta-Opti

Delta-Opti RG-EG105G V2 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung