8
Conguring Communication on PC
8
Using WiFi (Communication variants 2 and 4)
1. On your PC, look for available wireless networks.
2. To connect to the Gateway, click on the wireless network with the name “DELTA_
xxxxxxxxxxxx” (The “xxx” stand for the WiFi MAC address of the Gateway - you can
nd it on the type label).
3. On your PC, open the Internet browser. In the address eld, type in the standard IP
address of the Gateway (with the dots): 169.254.0.1 and press the ENTER button on
your PC. It works like for a normal website.
→The local website of the Gateway opens:
4. Now you can set up your micro inverters (see section 9, “Setting up and Starting
Micro Inverters”). If you nished with that, come back to this point.
→ If you don’t want to use SOLIVIA Monitor, conguration is now done and you can
disconnect your PC from the Gateway.
→If you want to use SOLIVIA Monitor, continue with the next step.
To connect to your router, you need network name and network key of your router. Both you can
usually nd on its type label or in the documentation delivered with your router.
5. To search a wireless network (e.g. your router), click on Congure Network.
6. In the new window, click on the Scan Wireless Networks button.
7. In the list, click on the network name of your router.
→A password dialog opens.
The communication variants mentioned in this section are described in section 5, “Set-
ting up Communication”.
