Delta Amplon TFM-RT-5/6K Bedienungsanleitung

www.deltapowersolutions.com

Delta UPS - Amplon Family

User Manual

The power behind competitiveness

Transformer Cabinet

5/ 6/ 8/ 10 kVA

Amplon Transformer Cabinet

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the warranty.

User Manual (“Manual”), including but not limited to the contents, information,

and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).

The Manual can only be applied to the operation or the use of this product. Any

disposition, duplication, dissemination, reproduction, modification, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop

the product, changes may be made to the information in this Manual at any time

without obligation to notify any person of such revision or changes. Delta will make

all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy,

non-infringement, merchantability or tness for a particular purpose of the Manual.

Table of Contents

III

Table of Contents

Chapter 1 : Introduction & Safety Instructions -------------------- 1

Chapter 2 : Package Inspection----------------------------------------- 4

Chapter 3 : Rear Panels --------------------------------------------------- 5

Chapter 4 : Installation----------------------------------------------------- 9

4.1 Installation Placement------------------------------------------ 9

4.2 Installation--------------------------------------------------------10

4.3 Rack-mount Conguration -----------------------------------10

4.4 Tower Conguration -------------------------------------------12

4.5 Connection Warning -------------------------------------------13

4.6 Input/ Output Connections -----------------------------------13

Chapter 5 : Operation -----------------------------------------------------16

5.1 Start up the Step Down Transformer (TFM-RT) --------16

5.2 Turn o󰀨 the Step Down Transformer (TFM-RT) --------16

Chapter 6 : Obtaining Service ------------------------------------------17

Appendix 1 : Specications ---------------------------------------------18

Appendix 2 : Warranty ----------------------------------------------------20

Amplon Transformer Cabinet

Chapter 1 : Introduction & Safety Instructions

Thank you for purchasing the TFM-RT series Transformer Cabinet, hereafter re-

ferred to as ‘TFM-RT’. The TFM-RT is a step down transformer and includes three

models, TFM-RT-5/6K (two models) and TFM-RT-8/10K (one model).

Please read this user manual thoroughly before installing your TFM-RT as it pro-

vides important information that should be followed during installation and mainte-

nance, which allows you to correctly set up your system for the maximum safety and

performance.

If you experience a problem with the TFM-RT, please refer to Chapter 6: Obtaining

Service or contact Delta service personnel for assistance.

zThe TFM-RT is ONLY intended to be installed in an indoor temperature con-

trolled environment that is free of conductive contaminants. It is not intended for

use in a computer room as dened in the Standard for the Protection of Elec-

tronic Computer/ Data Processing Equipment ANSI/ NFPA75.

zThe maximum ambient operating temperature for the TFM-RT is 40°C (“0

~40°C” for Ambient Operation).

1. The external vents and openings on the unit are provided for ventilation.

To ensure reliable operation of the unit and to protect the unit from over-

heating, these vents and openings must not be blocked or covered. Do not

insert any object into any of the vents or openings that may hinder the ve-

ntilation.

2. Install the unit in a well ventilated area, away from excess moisture, heat,

dust, ammable gas or explosives.

3. Leave adequate space (at least 15cm) around all sides of the unit for pr-

oper ventilation.

4. Do not mount the unit with its front or rear panel facing down at any angle.

5. Before usage, you must allow the unit to adjust to room temperature (20°C

~25°C or 68°F~77°F) for at least one hour to avoid moisture condensing

inside the unit.

zThe TFM-RT contains potentially hazardous voltages. Do not attempt to disas-

semble the unit. The unit contains no user serviceable parts. Repairs must be

performed by QUALIFIED SERVICE PERSONNEL ONLY.

Chapter 1 Introduction & Safety Instructions

zThe TFM-RT-5/6K comes with an attached #10 AWG input power cord. Do not

use extension cords or surge strips. If you want to use adapter plugs, please

choose type B plugs suitable for power rating (i.e. 208 Vac/ 24 A). Besides, the

adapter plugs must be certied by UL.

zThe TFM-RT-8/10K comes with a #6 AWG input power cable in the box. The

copper terminals for the input and output cables are included. Connect one end

of the input power cable to the input terminal block on the TFM-RT-8/10K. Con-

nect the other end of the input power cable to the power supply. Do not use ex-

tension cords, adapter plugs, or surge strips.

zFor pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible. For permanently connected equipment, a readily

accessible disconnect device shall be incorporated external to the equipment.

zTo reduce the risk of electrical shock with the installation of the unit and the con-

nected equipment, the user must ensure that the TFM-RT is properly grounded

due to a possible risk of AC current leakage.

zONLY Qualied Service Personnel can perform Installation and Servicing of

the TFM-RT. Delta accepts no liabilities and is not limited to: injury to the Ser-

vice Personnel, or damages to the TFM-RT, the power supply, or the connected

equipment caused by the incorrect installation or servicing of the power supply

system.

zWhen using the TFM-RT, the load MUST be limited as follows:

TFM-RT-5/6K TFM-RT-8/10K

5kVA/ 5K Watts 10kVA/ 10K Watts

WARNING:

Do not use the mounting brackets to lift the TFM-RT. The mounting brac-

kets are only for securing the unit to the rack.

zThe equipment has been tested and found to comply with the limits for a Class

B computing device and the Class B limits for radio noise emissions from digital

apparatus. These limits are designed to provide reasonable protection against

such interference in a residential installation. This equipment generates and

uses radio frequency and if not installed and used properly, that is, in strict ac-

cordance with the manufacturer’s instructions, this equipment may cause inter-

ference to radio and television reception. If this equipment does cause interfer-

ence to radio or television reception, which can be determined by turning the

equipment o󰀨 and on, the user is encouraged to try to correct the interference by

Amplon Transformer Cabinet

one or more of the following measures:

1. Re-orient the receiving antenna.

2. Relocate the computer with respect to the receiver.

3. Move the computer away from the receiver.

4. Plug the computer into a di󰀨erent outlet so that the computer and receiver

are on di󰀨erent branch circuits.

5. Shielded communications interface cables must be used with this product.

zChanges or modifications to this unit not expressly approved by the party re-

sponsible for compliance could void the user’s authority to operate the equip-

ment.

zLife support policy

As a general policy, Delta does not recommend the use of any of our products

in life support applications where failure or malfunction of the product can be

reasonably expected to cause failure of the life support device or to signicantly

a󰀨ect its safety or e󰀨ectiveness. We do not recommend the use of any of our

products in direct patient care. We will not knowingly sell our products for use

in such applications unless it receives in writing assurances satisfactory to us

that (a) the risks of injury or damage have been minimized, (b) the customer

assumes all such risks, and (c) our liability is adequately protected under the

circumstances.

Examples of devices considered to be life support devices are neonatal oxygen

analyzers, nerve stimulators (whether used for anesthesia, pain relief, or other

purposes), auto transfusion devices, blood pumps, defibrillators, arrhythmia

detectors and alarms, pacemakers, hemodialysis systems, peritoneal dialysis

systems, neonatal ventilator incubators, ventilators for both adults and infants,

anesthesia ventilators, and infusion pumps as well as any other devices desig-

nated as “critical” by the United States FDA.

zAll wiring and equipment should be installed in accordance with NFPA 70

(National Electrical Code) and ANSI C2 (National Electrical Safety Code). It is

the responsibility of the Authority Having Jurisdiction over the nal installation to

determine if the nal congurations meet the necessary criteria for installation

and use.

zStandard Compliance

UL1778

Chapter 2 Package Inspection

Chapter 2 : Package Inspection

Once you receive the product it should be visually inspected for damage that may

have occurred in shipping. Immediately notify the carrier and place of purchase if

any damage is found. Warranty claims for damage caused by the carrier will not be

honored by the manufacturer. The packing materials that the product was shipped

in were carefully designed to minimize any shipping damage. In the unlikely case

that the product needs to be returned to the manufacturer, use the original packing

material. Since the manufacturer is not responsible for shipping damage incurred

when the product is returned, the original packing material is inexpensive insurance.

PLEASE SAVE THE PACKING MATERIALS.

The TFM-RT package contains the following items:

No. Item Q’ty TFM-RT-5/6K TFM-RT-8/10K

1Transformer 1 PC

2User Manual 1 PC

3Bracket Ear 1 Set

4Rail Kit 1 Set

5Copper Terminal 10 PCS

6Input Cable 1 PC

7Tower Stand Extender 4 PCS

8Tower Stand Extender 6 PCS

Amplon Transformer Cabinet

Chapter 3 : Rear Panels

zTFM-RT-5/6K (TFM502R4RT2N035) Rear Panel

OUTPUT BREAKER-2

250V AC 20A

OUTPUT SOCKET-2

20A MAX.

OUTPUT SOCKET-1

30AMAX.

INPUT BREAKER

250V AC 30A

TRANSFORMER PROTECTION

BREAKER 8A

AC INPUT

OUTPUT SOCKET-3

20A MAX.

OUTPUT BREAKER-3

250VAC 20A

OUTPUT SOCKET-4

20AMAX.

OUTPUT BREAKER-4

250VAC 20A

(Rear View)

459

No. Description

1Load 1: 208V output receptacle (L6-30R x 1).

2Load 2: 208V output receptacle (L6-20R x 1).

3Load 3: 120V output receptacles (5-15/ 20R x 3).

4Load 4: 120V output receptacles (5-15/ 20R x 3).

5The Load 2 circuit breaker will trip when the load exceeds the power

rating.

6The Load 3 circuit breaker will trip when the load exceeds the power

rating.

7The Load 4 circuit breaker will trip when the load exceeds the power

rating.

8The input circuit breaker will trip when the load exceeds the TFM-RT’s

power rating.

9The TFM-RT’s circuit breaker will trip when the TFM-RT becomes

overheated.

Chapter 3 Rear Panels

No. Description

The input power cord is for connecting to the UPS.

zTFM-RT-5/6K (TFM502R5RT2N035) Rear Panel

OUTPUT SOCKET-3

20A MAX.

OUTPUT SOCKET-4

20A MAX.

OUTPUT BREAKER-4

250V AC 20A

OUTPUT BREAKER-3

250V AC 20A

OUTPUT SOCKET-1

20A MAX.

OUTPUT SOCKET-2

20A MAX.

OUTPUT BREAKER-2

250V AC 20A

OUTPUT BREAKER-1

250V AC 20A

TRANSFORMER PROTECTION

B REAKER 8A

AC INPUT

INPUT BREAKER

250V AC 30A

(Rear View)

No. Description

1Load 1: 120V output receptacles (5-15/ 20R x 3).

2Load 2: 120V output receptacles (5-15/ 20R x 3).

3Load 3: 120V output receptacles (5-15/ 20R x 3).

4Load 4: 120V output receptacles (5-15/ 20R x 3).

5The Load 1 circuit breaker will trip when the load exceeds the power

rating.

6The Load 2 circuit breaker will trip when the load exceeds the power

rating.

7The Load 3 circuit breaker will trip when the load exceeds the power

rating.

8The Load 4 circuit breaker will trip when the load exceeds the power

rating.

Amplon Transformer Cabinet

No. Description

9The input circuit breaker will trip when the load exceeds the TFM-RT’s

power rating.

The TFM-RT’s circuit breaker will trip when that the TFM-RT becomes

overheated.

The input power cord is for connecting to the UPS.

zTFM-RT-8/10K (TFM103R4RT2N035) Rear Panel

No. Description

1Load 1: 120V output receptacles (5-15/ 20R x 4).

2Load 2: 120V output receptacles (5-15/ 20R x 4).

3Load 3: 208V output receptacles (L14-30R x 1).

4Load 4: 208V output receptacles (L14-30R x 1).

5The Load 1 circuit breaker will trip when the load exceeds the power

rating.

6The Load 2 circuit breaker will trip when the load exceeds the power

rating.

OUTPUT SOCKET-2 / 20A MAX.

OUTPUT BREAKER-1

250V AC 20A

OUTPUT BREAKER-2

250V AC 20A

OUTPUT BREAKER-4

250V AC 30A

OUTPUT BREAKER

250V AC 50A

OUTPUT SOCKET-1 / 20A MAX.

TRANSFORMER

PROTECTION

BREAKER 8A

La NLb

120V AC 120V AC

AC OUTPUT

Lc Ld

208V AC

AC INPUT

OUTPUT BREAKER-3

250V AC 30A

OUTPUT SOCKET-4

30A MAX.

OUTPUT SOCKET-3

30A MAX.

4 3

10 11 11 12

(Rear View)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta Rack & Stand Handbücher

Delta

Delta DELO-0105 Bedienungsanleitung

Delta

Delta 23-812 Bedienungsanleitung

Delta

Delta AIREYE Bedienungsanleitung

Delta

Delta ARM-0370 Bedienungsanleitung

Delta

Delta ARM-405L Bedienungsanleitung

Delta

Delta VIVOTEK AM-11H Bedienungsanleitung

Delta

Delta RS4000 Bedienungsanleitung

Delta

Delta ARM-475 Bedienungsanleitung

Delta

Delta WA86 Bedienungsanleitung

Delta

Delta GAM-040 Bedienungsanleitung

Delta

Delta ARM-0267 Bedienungsanleitung

Delta

Delta 50-785 Bedienungsanleitung

Delta

Delta ARM-459 Bedienungsanleitung

Delta

Delta ARM-0541 Bedienungsanleitung

Delta

Delta ARM-1101 Bedienungsanleitung

Delta

Delta 50-170 Bedienungsanleitung

Delta

Delta Quick Rack WS1003 Bedienungsanleitung

Delta

Delta ARM-473 Bedienungsanleitung

Delta

Delta HDRS6300 Bedienungsanleitung

Delta

Delta ARM-405 Bedienungsanleitung

Delta

Delta 96-014 Bedienungsanleitung

Delta

Delta ARM-405L Bedienungsanleitung

Delta

Delta ARM-460 Bedienungsanleitung

Delta

Delta ARM-422M Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung