Delta Amplon RT Series Bedienungsanleitung

Delta UPS - Amplon Family

The power behind competitiveness

www.deltapowersolutions.com

RT Series, Three Phase

10/ 15/ 20 kVA

User Manual

ESC

AmplonRTSeries 1

SAVE THIS MANUAL

(“Manual”), including but not limited to the contents, information, and figures are solely owned and

reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to the operation or the

use of this product. Any disposition, duplication, dissemination, reproduction, modification,

translation, extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop the product,

changes may be made to the information in this Manual at any time without obligation to notify any

person of such revision or changes. Delta will make all possible efforts to secure the accuracy and

the integrity of this Manual. Delta disclaims any kinds or forms of warranty, guarantee, or

undertaking, either expressly or implicitly, including but not limited to the completeness,

faultlessness, accuracy, non-infringement, merchantability or fitness for a particular purpose of the

Manual.

This manual contains important instructions and warnings that you should follow during the

installation, operation, storage and maintenance of this product. Failure to heed these

instructions and warnings will void the warranty.

Table of Contents

Chapter 1: Important Safety Instructions .................................................................. p. 3

Chapter 2: Introduction ............................................................................................. p. 7

Chapter 3: Operation Panel...................................................................................... p. 12

Chapter 4: Rear Panel.............................................................................................. p. 21

Chapter 5: Communication Interfaces ...................................................................... p. 24

Chapter 6: Installation............................................................................................... p. 27

Chapter 7: UPS Connection ..................................................................................... p. 37

Chapter 8: External Battery Pack ............................................................................. p. 69

Chapter 9: Operation ................................................................................................ p. 87

Chapter 10: LCD Display & Settings ........................................................................ p. 93

Chapter 11: Optional Accessories............................................................................. p. 111

Chapter 12: Troubleshooting .................................................................................... p. 113

Chapter 13: Maintenance ......................................................................................... p. 119

Appendix 1: Technical Specifications........................................................................ p. 121

Appendix 2: Warranty ............................................................................................... p. 123

AmplonRTSeries 3

Chapter 1 : Important Safety Instructions

1.1 Safety Instructions

Installation Warnings

Before installation and usage, please read this User Manual thoroughly. This helps you to

use the product correctly and safely.

Install the UPS in a well-ventilated indoor area, away from excess moisture, heat, dust,

flammable gas or explosives. To avoid fire accidents and electric shock, the indoor area must

be free of conductive contaminants. For the temperature and humidity specifications, please

refer to Appendix 1: Technical Specifications.

Follow the IEC 60364-4-42 standard to install the UPS.

Leave adequate space (at least 50 cm (19.7”)) at the front and rear of the UPS for proper

ventilation.

Connection Warnings

The UPS must be well grounded due to a possible risk of current leakage.

It is necessary to connect protective devices with the UPS when the UPS is connected to

power sources and critical loads.

The protection devices connected to the UPS must be installed near the UPS and must be

easily accessible for operation.

If you need to move the UPS or perform re-wiring, please turn off the AC input power and

disconnect the battery input to ensure that the UPS has been safely shut down. Otherwise,

the output end might still be energized, which might cause electric shock.

Usage Warnings

This is a class-A product. In a domestic environment, this product may cause radio

interference, in which case the user is required to take adequate measures.

The UPS can be used to power computers and associated peripheral devices, such as

monitors, modems, cartridge tape drives, external hard drives, etc.

It is not recommended to connect the UPS with the following types of loads. For the load

suitability, please contact Delta customer service before purchasing.

1. regenerative loads (e.g. CNC machines and lifts)

2. asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)

To ensure reliable operation of the UPS and to protect the UPS from overheating, the slits

and openings in the UPS must not be blocked or covered.

Before usage, you must allow the UPS to adjust to room temperature for at least one hour to

ensure that there is no moisture condensing inside the UPS.

Do not pour and splash any liquid on the UPS. Do not insert any object into the UPS’s slits

and openings. Do not put beverages on or around the UPS.

When an emergency occurs, (1) press and hold the ON/ OFF button ( ) for 3 seconds, (2)

release it after you hear the beep sound, (3) use the Scrolling Up or Down button ( / )

to select ‘Yes’, and (4) press the Enter button ( ) to confirm your selection to turn off the

UPS. After that, cut off the input power to shut down the UPS completely.

Do not use any cleaning liquid or cleaning spray to clean the UPS. Before cleaning, please

make sure that the UPS has been shut down completely, the UPS’s input power cables have

been unplugged, and the batteries have been disconnected.

All maintenance services must be performed by qualified service personnel.

Forbid opening or removing the cover of the UPS by yourself to avoid high voltage electric

shock.

You must contact qualified service personnel if either of the following events occurs:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after the instructions in this User Manual are carefully

observed.

NOTE:

If you use the UPS in an area that generates or incurs dust, you should install a dust filter

(optional) in the UPS to ensure its normal product life and functions.

Battery Precautions

Keep the batteries away from heat sources. Do not open or mutilate the batteries.

Do not dispose of batteries in a fire. The batteries may explode.

The released electrolyte is harmful to skin and eyes and may be toxic.

A battery can present a risk of electric shock and high short-circuit current.

AmplonRTSeries 5

Servicing of the batteries and battery packs must be performed or supervised by qualified

service personnel knowledgeable in the batteries, battery packs and required precautions.

Keep unauthorized personnel away from the batteries and battery packs.

The risk of electric shock and short-circuit current is possible when the batteries are

connected to the UPS. Before maintenance, disconnect all batteries to cut off the battery

power.

For battery replacement, use only the same number and type of batteries.

Observe the following before replacing the batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Disconnect the charging source prior to connecting or disconnecting the battery input

terminals.

6. Remove every battery grounding during installation and maintenance to reduce the

likelihood of electric shock. If any part of the batteries is grounded, please remove the

grounding connection.

Do not connect the batteries in reverse; otherwise, an electric shock or fire accident might

occur.

The batteries might lose their power during shipment or storage. Before you use the UPS for

the first time, please fully charge the batteries until the battery percentage shown on the

UPS’s LCD is 100% ( ). If the UPS needs to be stored for an extended period of time,

please fully recharge the lead-acid batteries (for at least 24 hours) every three months. As for

lithium-ion batteries and other batteries, please contact your battery vendor for the

information. Regardless of battery type, please fully charge the batteries until the battery

percentage shown on the LCD is 100% ( ).

NOTE:

To charge the batteries, please connect the external battery pack to the UPS.

WARNING:

1. The risk of electric shock and short-circuit current is possible when the batteries are

still connected to the UPS even if the UPS has been disconnected from the mains. Make

sure to cut off the battery source before maintenance.

2. When the UPS is connected to an external battery pack, installation of appropriate

protection devices, such as DC fuses or a DC breaker, is required.

1.2 Standard Compliance

CE, UL/ cUL, RCM, TISI, Energy star

UL1778 (for UPS + EBC), IEC/ EN 62040-1 (for UPS + EBC + PDB/ MBB)

EN 62040-2 Category C2/ FCC class A

1.3 Storage

Prior to installation

If the UPS needs to be stored prior to installation, it should be placed in a dry and well-

ventilated area. The allowable storage temperature is between -15°C (5°F) and +55°C (131°F)

and the allowable relative humidity (non-condensing) is between 5% and 95%.

After usage

(1) Press and hold the ON/ OFF button ( ) for 3 seconds, (2) release it after you hear the

beep sound, (3) use the Scrolling Up or Down button ( / ) to select 'Yes', and (4) press

the Enter button ( ) to confirm your selection to turn off the UPS. Make sure the UPS is shut

down, disconnect the UPS from the utility AC power, remove all loads/ equipment from the

UPS, and store the UPS in a dry and well-ventilated area at a temperature between -15°C

(5°F) and +55°C (131°F) and at a relative humidity (non-condensing) between 5% and 95%.

If the UPS needs to be stored for an extended period of time, please recharge the idle batteries

regularly. Refer to the above section Battery Precaution for relevant information.

NOTE:

1. To charge the batteries, please connect the external battery pack to the UPS.

2. After storage and before start-up of the UPS, you must allow the UPS to adjust to room

temperature (20°C ~ 25°C (68°F ~ 77°F)) for at least one hour to ensure that there is no

moisture condensing inside the UPS.

AmplonRTSeries 7

Chapter 2 : Introduction

2.1 Product Description

The RT series UPS (models available: RT-10K3P, RT-15K3P and RT-20K3P) is an advanced on-

line and double-conversion UPS which provides your sensitive equipment with reliable and

consistent sine-wave power. It helps to save on electricity costs and keep your electronic

equipment safe and able to run smoothly at all times. The unit’s output power factor is up to unity,

achieving power and energy efficiency.

The UPSs accept three-phase power supply. When taking three-phase input power, the UPS output

can be configured into three-phase or single-phase to adapt to your loads. You can connect a

variety of facilities such as personal computers, networks, servers, and telecommunication

equipment to the UPS.

The UPS does not have internal batteries and must be connected to an external battery pack. See

the battery options below.

1. Standard battery pack (optional) – Delta lead-acid battery pack or Delta lithium-ion battery pack

(RT-20K-LIB/ RT-10K-LIB)

2. Customer-owned battery pack – lead-acid battery or others

2.2 Exterior & Dimensions

(Figure 2-1-1: RT-10K3P UPS_ Exterior & Dimensions)

(Figure 2-1-2: RT-15K3P/ RT-20K3P UPS_ Exterior & Dimensions)

AmplonRTSeries 9

2.3 Package List

The package contains the following items. Please check if any item is missing. If there is anything

missing, please contact the dealer immediately.

Models: UPS103R6RT2N035/ UPS103R6RT2N0B0

No. Item Q’ty

1 UPS 1 PC

2 User Manual 1 PC

3 Parallel Cable 1 PC

4 Tower Stand 1 Set

5 Terminal Kit 1 Set

6 Battery Cable (1500 mm (59”))*11 PC

7 Bus Bar 1 Set

8 Ear Bracket Kit 1 Set

9 USB Cable 1 PC

10 Factory Test Report 1 PC

Andere Handbücher für Amplon RT Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta 3KVA Bedienungsanleitung

Delta

Delta Amplon RT5K Bedienungsanleitung

Delta

Delta Modulon Series Bedienungsanleitung

Delta

Delta DPH series Bedienungsanleitung

Delta

Delta DPH series Bedienungsanleitung

Delta

Delta NH Plus series Bedienungsanleitung

Delta

Delta HPH-60K Bedienungsanleitung

Delta

Delta Amplon RT 5kVA Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon MX Series Bedienungsanleitung

Delta

Delta Amplon N Series Bedienungsanleitung

Delta

Delta Ultron DPS-400K Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Ultron GES203HH33A035 Bedienungsanleitung

Delta

Delta Ultron HPH Series Bedienungsanleitung

Delta

Delta 1KVA Bedienungsanleitung

Delta

Delta DRU-24V10AMN Bedienungsanleitung

Delta

Delta NT Series Bedienungsanleitung

Delta

Delta NH-20k Bedienungsanleitung

Delta

Delta UPS103N2004N0B0 Original Betriebsanleitung

Delta

Delta Ultron Series Bedienungsanleitung

Delta

Delta Amplon UPS102N2000B035 Bedienungsanleitung

Delta

Delta 1kVAS Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung