Delta Amplon UPA102R2RX2N035 Bedienungsanleitung

www.deltaww.com

Delta UPS Amplon Family

RT Gen3 Series, Single Phase

1/ 2/ 3 kVA

User Manual

The power behind competitiveness

IIAmplon RT Gen3 Series

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the

warranty.

of this User Manual (“Manual”), including but not limited to the contents,

information, and figures are solely owned and reserved by Delta Electronics

Inc. (“Delta”). The Manual can only be applied to the operation or the use

of this product. Any disposition, duplication, dissemination, reproduction,

modification, translation, extraction, or usage of this Manual in whole or in

part is prohibited without the prior written permission of Delta. Given that

Delta will continuously improve and develop the product, changes may be

made to the information in this Manual at any time without obligation to notify

any person of such revision or changes. Delta will make all possible efforts to

secure the accuracy and the integrity of this Manual. Delta disclaims any kinds

or forms of warranty, guarantee, or undertaking, either expressly or implicitly,

including but not limited to the completeness, faultlessness, accuracy, non-

infringement, merchantability or fitness for a particular purpose of the Manual.

III

Table of Contents

----------------------1

1.1 Installation Warnings ---------------------------------- 1

1.2 Connection Warnings ---------------------------------- 1

1.3 Usage Warnings ---------------------------------------2

1.4 Storage------------------------------------------------3

1.5 Standard Compliance----------------------------------4

 -------------------------------------- 5

2.1 General Overview -------------------------------------5

2.2 Package Inspection------------------------------------5

2.3 Operating Principe------------------------------------- 7

2.4 Exterior & Dimensions ---------------------------------7

2.5 Front View -------------------------------------------9

2.6 Rear View --------------------------------------------10

 -------------------------------------- 15

3.1 Rack Mounting ---------------------------------------15

3.2 Tower Mounting --------------------------------------17

-------------------------------------- 19

4.1 UPS Connection & Setup -----------------------------19

4.2 Battery Replacement

(for Standard Runtime Model only) --------------------21

---------------------------------------- 23

5.1 Multi-function Buttons------------------------------- 23

5.2 LCD Panel ------------------------------------------- 24

5.3 Audible Alarm --------------------------------------- 26

IVAmplon RT Gen3 Series

5.4 LCD Display Wordings Index ------------------------- 27

5.5 UPS Setting ----------------------------------------- 28

5.6 Operation Modes ------------------------------------ 33

5.7 Fault Reference Code-------------------------------- 34

5.8 Warning Indicator------------------------------------ 35

---------------------------- 36

 --------------------------------- 37

 ------------------------------------ 40

 ----------------------- 42

--------------------------------------- 48



 

zBefore installation and usage, please read this



thoroughly. This

helps you to use the product correctly and safely.

zDo not install, use, operate and maintain the UPS if you are not trained for it.

zInstall the UPS in a well-ventilated indoor area, away from excess mois-

ture, heat, dust, flammable gas or explosives. To avoid fire accidents and

electric shock, the indoor area must be free of conductive contaminants.

For the temperature and humidity specifications, please refer to





zLeave adequate space around all sides of the UPS for proper ventilation

and maintenance.

z

 

zDo not connect appliances or devices which would overload the UPS (e.g.

laser printers) to the UPS’s output sockets.

zDo not connect domestic appliances such as hair dryers to the UPS’s out-

put sockets.

zIt is not recommended to connect the UPS with the following types of

loads. For the load suitability, please contact Delta customer service before

purchasing.

1. regenerative loads (e.g. CNC machines and lifts)

2. asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)

zPlace cables in such a way that no one can step on or trip over them.

zConnect the UPS only to an earthed shockproof outlet which must be eas-

ily accessible and close to the UPS.

zPlease only use the VDE-tested and CE-marked mains cable (e.g. the

mains cable of your computer) to connect the UPS to the building wiring

outlet (shockproof outlet).

2Amplon RT Gen3 Series

zPlease only use the VDE-tested and CE-marked power cables to connect

the loads to the UPS.

zWhen installing the equipment, please ensure that the sum of the leakage

current of the UPS and the connected devices does not exceed 3.5 mA.

 

zOnly qualified service personnel can upgrade the UPS’s firmware.

zBefore applying electrical power to the UPS, you must allow the UPS to ad-



ensure that there is no moisture condensing inside the unit.

zDo not dismantle the UPS.

zDo not disconnect the mains to the UPS or the building wiring outlet

(shockproof socket outlet) during operation since this would disable the

protective earthing of the UPS and of all connected loads.

zThe UPS features its own and some models have internal current source

(batteries). The UPS’s output sockets or output terminal blocks may be

electrically live even if the UPS is not connected to the building wiring out-

let.

zPlease replace fuse(s) only with the same type and amperage in order to

avoid fire hazards.

zIn order to completely disconnect the UPS from the mains, please first

press the  button.

zDo not pour and splash any liquid on the UPS. Do not insert any object into

the UPS’s slits and openings. Do not put beverages on or around the UPS.

zThe UPS operates with hazardous voltage. Repairs must be only carried

out by qualified service personnel.



Risk of electric shock! Even after the unit is disconnected from the

mains (building wiring outlet), components inside the UPS are still

connected to the batteries and electrically live and dangerous.

zBefore carrying out any kind of service and/ or maintenance, disconnect

the batteries from the UPS and verify that no current is present and no

hazardous voltage exists in the terminals of high capability capacitor such

as BUS capacitors.

zOnly qualified personnel can perform battery replacement. Unauthorized

personnel shall be kept away from the batteries.



Risk of electric shock! The battery circuit is not isolated from the

input voltage. Hazardous voltage may occur between the battery

terminals and the ground.

zDo not dispose of the battery or batteries in a fire. The batteries may ex-

plode.

zDo not open or damage the battery or batteries. The released electrolyte is

harmful to the skin and eyes and may be toxic.

zOnly use the same type of batteries from the same supplier. Never use old,

new and different Ah batteries at the same time.

zA battery can present a risk of electrical shock and high short-circuit cur-

rent. Contact with any part of a grounded battery can result in electrical

shock. The following precautions should be observed when working on

batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on top of the batteries.

5. Disconnect charging source and loads prior to installing or maintaining

the batteries.

6. Remove battery grounds during installation and maintenance to reduce

likelihood of shock. Remove the connection from ground if any part of

the battery is determined to be grounded. Please note that the battery

grounds mean any battery pole (+/ -) connecting to the ground.

 

zUse the original packing materials to pack the UPS to prevent any possible

damage.

z

If the UPS needs to be stored prior to installation, it should be placed in a

dry and well-ventilated indoor area. The allowable storage temperature is



(non-condensing) is between 10% and 90%.

4Amplon RT Gen3 Series

z

Press and hold the  button for at least 2 seconds to turn off

the UPS. Make sure the UPS is completely shut down, disconnect the UPS

from the utility AC power, remove all loads from the UPS and store the

UPS in a dry and well-ventilated indoor area at a temperature of between



between 10% and 90%. If the UPS needs to be stored for an extended

period of time, please recharge the idle batteries regularly. Please refer to

the table below.













          

 Every 3 months

Whenever you recharge the

batteries (internal or/ and external),

please fully charge them until the

Battery Level indictor is fully

on.

         

 Every 2 months

 

zCE

zUKCA

z

z



 

The RT Gen 3 series UPS, available in 1kVA, 2 kVA and 3 kVA, is an online

double-conversion UPS providing reliable and consistent sine-wave quality

power to your equipment. It supports personal computers, networks, servers,

telecommunication equipment and a variety of other facilities.

There are two models for selection to meet different backup time

requirements, which are standard and extended runtime. For the extended

runtime model, it can connect to the optional Delta external battery pack.

The unit provides output power factor up to 0.9, which produces greater

electric power efficiency at low cost. It can handle wide input voltage range

and keep your applications safe and running smoothly at all times.

 

During UPS transportation, some unpredictable situations might occur. It is

recommended that you inspect the UPS exterior packaging. If you notice any

damage, please immediately contact the dealer from whom you purchased the

unit.

Please check if any item is missing according to the following package list.

If the UPS needs to be returned, carefully repack the UPS and all of the

accessories using the original packing materials that came with the unit.

2 3

6 7

6Amplon RT Gen3 Series

No.  

1UPS*11 PC

2Input Cable 1 PC

3USB Cable 1 PC

4User Manual 1 PC

5Battery Cable Kit

(for extended runtime model only)

1 Set







6Ear Bracket Kit

1 Set

(including M4 screw 8 PCS

and ear bracket 

7Tower Stand 1 Set



*1For more model information, please refer to





Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon RX series Bedienungsanleitung

Delta

Delta NH-20k Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta RT Series Bedienungsanleitung

Delta

Delta EH-10K Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Delta

Delta DRU-24V10AMN Bedienungsanleitung

Delta

Delta UPS V3 Bedienungsanleitung

Delta

Delta NT Series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta HPH-60K Bedienungsanleitung

Delta

Delta UPS102N2002N0B0 Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta 600VA Betriebsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Delta

Delta M-1K Bedienungsanleitung

Delta

Delta Amplon UPS102N2000B035 Bedienungsanleitung

Delta

Delta Modulon Series Bedienungsanleitung

Delta

Delta Ultron GES203HH33A035 Bedienungsanleitung

Delta

Delta Amplon MX Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung