Delta INX Series Bedienungsanleitung

www.deltaelectronicsindia.com

Delta UPS - Amplon Family

User Manual

The power behind competitiveness

INX Series, Single Phase

1/ 2/ 3 kVA

Amplon INX Series

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the warranty.

User Manual (“Manual”), including but not limited to the contents, information,

and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).

The Manual can only be applied to the operation or the use of this product. Any

disposition, duplication, dissemination, reproduction, modification, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop

the product, changes may be made to the information in this Manual at any time

without obligation to notify any person of such revision or changes. Delta will make

all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy,

non-infringement, merchantability or tness for a particular purpose of the Manual.

Table of Contents

III

Table of Contents

Chapter 1 : Important Safety Warnings------------------------------- 1

1.1 Transportation ---------------------------------------------------- 1

1.2 Preparation-------------------------------------------------------- 1

1.3 Installation--------------------------------------------------------- 1

1.4 Operation ---------------------------------------------------------- 2

1.5 Maintenance, Service and Faults --------------------------- 2

1.6 Packing List ------------------------------------------------------- 3

Chapter 2 : Installation and Setup ------------------------------------- 4

2.1 Rear Panel View------------------------------------------------- 4

2.2 Setup the UPS --------------------------------------------------- 5

Chapter 3 : Operation -----------------------------------------------------10

3.1 Button Operation -----------------------------------------------10

3.2 LCD Panel--------------------------------------------------------11

3.3 Audible Alarm----------------------------------------------------13

3.4 LCD Display Wordings Index--------------------------------14

3.5 UPS Setting------------------------------------------------------15

3.6 Operating Mode Description---------------------------------24

3.7 Faults Reference Code ---------------------------------------25

3.8 Warning Indicator-----------------------------------------------26

Chapter 4 : Troubleshooting --------------------------------------------27

Chapter 5 : Optional Accessories -------------------------------------29

Chapter 6 : Technical Specications ---------------------------------30

Chapter 7 : Warranty-------------------------------------------------------32

Chapter 8 : Global Regional o󰀩ce ------------------------------------33

Amplon INX Series

Chapter 1 : Important Safety Warnings

Please comply with all warnings and operating instructions in this manual strictly.

Save this manual properly and read carefully the following instructions before

installing the unit. Do not operate this unit before reading through all safety

information and operating instructions carefully.

1.1 Transportation



zPlease transport the UPS system only in the original package to protect against

shock and impact.

1.2 Preparation



zCondensation may occur if the UPS system is moved directly from cold to warm

environment. The UPS system must be absolutely dry before being installed.

Please allow at least two hours for the UPS system to acclimate the environ-

ment.



zDo not install the UPS system near water or in moist environments.



zDo not install the UPS system where it would be exposed to direct sunlight or

near heater.



zDo not block ventilation holes in the UPS housing.

1.3 Installation



zDo not connect appliances or devices which would overload the UPS system (e.g.

laser printers) to the UPS output sockets.



zIt is not recommended to connect the UPS with following type of loads.

For the load suitability please contact Delta customer service before purchasing.

1. Regenerative loads (e.g. CNC machine and lifts)

2. Asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)



zPlace cables in such a way that no one can step on or trip over them.



zDo not connect domestic appliances such as hair dryers to the UPS output sockets.



zThe UPS can be operated by any individuals with no previous experience.



zConnect the UPS system only to an earthed shockproof outlet which must be

easily accessible and close to the UPS system.

Chapter 1 Important Safety Warnings



zPlease use only VDE-tested, CE-marked mains cable (e.g. the mains cable of

your computer) to connect the UPS system to the building wiring outlet (shock-

proof outlet).



zPlease use only VDE-tested, CE-marked power cables to connect the loads to

the UPS system.



zWhen installing the equipment, it should ensure that the sum of the leakage cur-

rent of the UPS and the connected devices does not exceed 3.5mA.

1.4 Operation



zDo not disconnect the mains cable on the UPS system or the building wiring

outlet (shockproof socket outlet) during operations since this would cancel the

protective earthing of the UPS system and of all connected loads.



zThe UPS system features its own, internal current source (batteries). The UPS

output sockets or output terminals block may be electrically live even if the UPS

system is not connected to the building wiring outlet.



z In order to fully disconnect the UPS system, rst press the OFF/ ENTER button

to disconnect the mains.



z Prevent no uids or other foreign objects from inside of the UPS system.

1.5 Maintenance, Service and Faults



zThe UPS system operates with hazardous voltages. Repairs may be carried out

only by qualied maintenance personnel.

WARNING:

Risk of electric shock. Even after the unit is disconnected from the mains

(building wiring outlet), components inside the UPS system are still

connected to the battery and electrically live and dangerous.



z Before carrying out any kind of service and/ or maintenance, disconnect the bat-

teries and verify that no current is present and no hazardous voltage exists in

the terminals of high capability capacitor such as BUS-capacitors.



zOnly persons are adequately familiar with batteries and with the required pre-

cautionary measures may replace batteries and supervise operations. Unauthor-

ized persons must be kept well away from the batteries.

WARNING:

Risk of electric shock. The battery circuit is not isolated from the input

voltage. Hazardous voltages may occur between the battery terminals and

the ground. Before touching, please verify that no voltage is present!

Amplon INX Series



zBatteries may cause electric shock and have a high short-circuit current. Please

take the precautionary measures specied below and any other measures nec-

essary when working with batteries:

- remove wristwatches, rings and other metal objects

- use only tools with insulated grips and handles.



zWhen changing batteries, install the same number and same type of batteries.



zDo not attempt to dispose of batteries by burning them. This could cause battery

explosion.



z Do not open or destroy batteries. Escaping electrolyte can cause injury to the

skin and eyes. It may be toxic.



zPlease replace the fuse only with the same type and amperage in order to avoid

re hazards.



zDo not dismantle the UPS system.

1.6 Packing List

123

No. Item Q’ty

1UPS 1 PC

2User manual 1 PC

3Battery cable 1 PC

4Input cable (1kVA / 2kVA) 1 PC

5Input cable (3kVA) 1 PC

6USB cable 1 PC

7Screws and nuts 2 Sets

Chapter 2 Installation and Setup

Chapter 2 : Installation and Setup

NOTE :

Before installation, please inspect the unit. Be sure that nothing inside the

package is damaged. Please keep the original package in a safe place for

future use.

2.1 Rear Panel View

1 kVA 2 kVA

3 kVA

No. Item

1AC input

2Remote emergency power o󰀨 port

3USB port

4RS-232 port

5Mini slot

6Programmable output socket

7Output socket

8External battery connector

9Input circuit breaker

Amplon INX Series

2.2 Setup the UPS

Before installing the UPS, please read below to select proper location to install

UPS.

1.UPS should be placed on the at and clean surface. Place it in an area away

from vibration, dust, humidity, high temperature, ammable liquids, gases,

corrosive and conductive contaminants. Install the UPS indoors in a clean

environment, where it is away from window and door. Maintain minimum

clearance of 100mm in the bottom of the UPS to avoid dust and high

temperature.

2.Maintain an ambient temperature range of 0ºC to 45ºC for UPS optimal

operation. For every 5ºC above 45ºC, the UPS will derate 12% of nominal

capacity at full load. The highest working temperature requirement for UPS

operation is 50ºC.

3.It’s required to maintain maximum altitude of 1000m to keep UPS normal

operation at full load UPS. If it’s used in high altitude area, please reduce

connected load. Altitude derating power with connected loads for UPS normal

operation is listed as below:

Chapter 2 Installation and Setup

4.Place UPS:

It’s equipped with fan for cooling. Therefore, place

the UPS in a well-ventilated area. It’s required to

maintain minimum clearance of 100mm in the front

of the UPS and 300mm in the back and two sides of

the UPS for heat dissipation and easy-maintenance.

5.Connect to External Battery Pack

When connecting external battery packs, please be sure to connect polarity

correctly. Connect positive pole of battery pack to positive pole of external

battery connector in UPS and negative pole of battery pack to negative pole

of external battery connector in UPS. Polarity misconnection will cause UPS

internal fault. It’s recommended to add one breaker between positive pole of

battery pack and positive pole of external battery connector in UPS to prevent

damage to battery packs from internal fault.

The required specication of breaker: voltage ≥ 1.25 x battery voltage/set;

current ≥ 50A

Please choose battery size and connected numbers according to backup

time requirement and UPS specications. To extend battery lifecycle, it’s

recommended to use them in the temperature range of 15ºC to 25ºC.

IS16242(Part)/

IEC 62 040-1

R -41076538

www.b is.gov.in

THOMASSAMUEL THOMASSAMUEL

Amplon INX Series

Step 1: Connect battery wires

Please connect external batteries to the UPS as

right chart.

Please refer to below chart to secure battery cable

to the terminal with supplied screws and nuts.

Step 2: UPS input connection

Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using

extension cords.



zFor input-socket type, the power cord is supplied in the UPS package. For

the type of power cord, please refer to the table below.

UPS Type of Power Cord

1kVA Plug 16A INDIA

2kVA Plug 16A INDIA



zFor input-terminal type, please follow below steps for the wiring conguration

1. Remove the small cover of the terminal block.

2. Suggest using AWG14 or 2.1 mm2power cords.

3. Upon completion of the wiring conguration, please check whether the

wires are securely a󰀩xed.

4. Put the small cover back to the rear panel.

TO EXTERNAL BATTERY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta UPS102N2002N0B0 Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta DPH series Bedienungsanleitung

Delta

Delta Ultron HPH Series Bedienungsanleitung

Delta

Delta 1KVA Bedienungsanleitung

Delta

Delta Amplon RT Series 5-10kVA Bedienungsanleitung

Delta

Delta Amplon RX series Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta Amplon UPA102R2RX2N035 Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta Ultron Series Bedienungsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Delta

Delta N-6K Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta NH Plus series Bedienungsanleitung

Delta

Delta DRU-24V10AMN Bedienungsanleitung

Delta

Delta M-1K Bedienungsanleitung

Delta

Delta Amplon MBB RT Series Bedienungsanleitung

Delta

Delta VX 600VA Original Betriebsanleitung

Delta

Delta UPS602N2004N035 Bedienungsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Delta

Delta NH-20k Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung