Denon DA-10 Bedienungsanleitung
.
DA-10
Portable USB-DAC/
Headphones Amplifier
Owner’s Manual
.
You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Tips Appendix
1
Front panel Side panel Rear panel Index
Accessories 5
Main features 6
High quality sound 6
High performance 6
Part names and functions 7
Front panel 7
Side panel 8
Rear panel 9
Charging for the first time 10
Connections
Connecting a headphone 13
Connecting a PC or Mac 14
Connecting an iPod to the iPod/iPhone port 15
Connecting a smartphone or portable player 17
Connecting an amplifier 18
Storing in the Pouch 19
Contents Connections Playback Settings Tips Appendix
Contents
2
Front panel Side panel Rear panel Index
Playback
Basic operation 21
Turning the power on 21
Selecting the input source 22
Adjusting the volume 22
Using as a D/A converter 23
Connecting and playing back from a computer (USB-DAC) 24
Playing back an iPod 32
Playing an iPod 33
Playing audio from devices connected to the AUX connector 34
Settings
Setting list 35
Tips
Contents 37
Troubleshooting 38
Contents Connections Playback Settings Tips Appendix
3
Front panel Side panel Rear panel Index
Appendix
D/A converter 41
Explanation of terms 42
Trademark information 43
Specifications 44
Index 47
Contents Connections Playback Settings Tips Appendix
4
Front panel Side panel Rear panel Index
Thank you for purchasing this Denon product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
Check that the following parts are supplied with the product.
.
.
.
.
Quick Start Guide Owner’s Manual (CD-ROM) Safety Instructions Warranty (North America model only)
.
.
.
.
Warranty (China model only) Micro USB cable (Micro B) Lightning USB cable 30pin USB cable
.
.
Stereo mini plug cable Pouch
Contents Connections Playback Settings Tips Appendix
5
Front panel Side panel Rear panel Index
Main features
High quality sound
0Advanced AL32 Processing and high precision 32 bit D/A
converter
Equipped with Advanced AL32 Processing, Denon’s unique analog
wave reproduction technology. Reproducibility of weak signals is
increased by expanding the 16-bit digital data to 32 bits.
Additionally, the unit is equipped with a 192 kHz/32-bit compatible high
performance D/A converter for converting the digital data expanded by
Advanced AL32 Processing into analog signals.
0High sound quality operational amplifier + current buffer
The unit is equipped with a low noise, high sound quality operational
amplifier.
The output level features a discrete current buffer circuit for fully driving
the headphones.
0Low phase noise crystal
Two low phase noise crystals (22.5792 MHz, 24.576 MHz) are used for
the master clock.
The crystals remove jitter from the master clock and faithfully reproduce
the high resolution sound source by syncing with and switching the
sampling frequency.
High performance
0Equipped with a USB-DAC function to support playback of high-
resolution sound sources
This unit supports the playback of high resolution audio formats such as
DSD (2.8/5.6 MHz) and PCM files up to 192 kHz/24 bits. It provides high
quality playback of high resolution files.
0GAIN switch
Switching the gain enables optimum driving of various types of
headphones that have different impedances.
Contents Connections Playback Settings Tips Appendix
6
Front panel Side panel Rear panel Index
Part names and functions
For buttons not explained here, see the page indicated in parentheses ( ).
Front panel
.
r
weq
APower/Volume knob
0This turns the power on/off. (v p. 21)
0This adjusts the volume level. (v p. 22)
BPower indicator (POWER)
The standby indicator changes as shown below according to the status
of the unit.
0Power on : Green
0Power off : Off
CHeadphones jack
Used to connect headphones.
NOTE
To prevent hearing loss, do not raise the volume level excessively when using
headphones.
DBattery indicator (CHARGE)
This displays the amount of remaining battery and charge status.
(v p. 11)
Contents Connections Playback Settings Tips Appendix
7
Front panel Side panel Rear panel Index
Side panel
.
q w e r
AGain selecting switch (GAIN)
This switches the headphone output gain. (v p. 35)
BOutput mode selecting switch (OUTPUT)
Set the output mode according to the device to be connected.
(v p. 36)
CCharge mode selecting switch (CHARGE)
Switches the charge mode when the power is on. (v p. 36)
DInput source selecting switch (INPUT)
This switches the source being played back on the unit. (v p. 22)
Contents Connections Playback Settings Tips Appendix
8
Front panel Side panel Rear panel Index
Rear panel
.
weq
AUSB-DAC port
Connects to a computer or USB charger. (v p. 10、 14)
BiPod/iPhone port
Connects to an iPod/iPhone/iPad. (v p. 15)
CAUX input connector
Connect this to the headphones jack on a smartphone or portable
player. (v p. 17)
Contents Connections Playback Settings Tips Appendix
9
Front panel Side panel Rear panel Index
Charging for the first time
This unit has an internal battery. Be sure to charge the battery before use.
It takes approximately 3.5 hours to recharge the battery when it is
completely run down using a USB charger (1.5 A or higher) or
approximately 6.5 hours when charging from a computer.
1Turn the power off.
0This unit can be charged when the power is on, but doing so
increases the time required for charging.
2Use the supplied micro USB cable to connect this
device to a computer, or connect a USB charger to the
USB-DAC port.
.
Ty p e A
Micro USB cable
(Micro B) (supplied)
Micro B
USB charger
Computer on which the driver
software and audio player
software are installed
NOTE
0Before USB connecting this unit to your computer, install the driver software in
your computer. (v p. 24)
0Download the driver software from the DA-10 page of the Denon website.
0It may take some time for this unit to be recognized as an enabled device on the
computer the first time it is connected to a computer.
0Charge this unit in a location where the ambient temperature is between 5 to 35 ℃.
The unit may not charge if the temperature is outside this range.
0Connect this unit directly to a computer. It may not charge correctly if connected
through a USB hub, etc.
0If you are listening to music at high volume while charging this unit, the battery may
still run down even while charging the unit if the speed at which power is
consumed is faster than the charging speed.
0Do not charge this unit while it is inside the supplied pouch, as doing so will cause
heat to build up. Remove this unit from the pouch before charging.
0Remove this unit from the charger when charging is complete.
0Charge this unit approximately once every six months, even if you do not use it for
a long time.
0Do not connect this unit to a device with a charging voltage other than 5V.
0If you connect this unit to a computer, make sure that the power of the computer is
on.
Contents Connections Playback Settings Tips Appendix
10
Front panel Side panel Rear panel Index
Andere Handbücher für DA-10
1
Inhaltsverzeichnis
Andere Denon Verstärker Handbücher
Denon
Denon HEOS LINK Bedienungsanleitung
Denon
Denon POA-3012CI - Multi-Zone Audio Distribution Power... Bedienungsanleitung
Denon
Denon PMA-2000AE Bedienungsanleitung
Denon
Denon PMA-2500NE Bedienungsanleitung
Denon
Denon PMA-1500AE Bedienungsanleitung
Denon
Denon PMA-360 Bedienungsanleitung
Denon
Denon PMA-800NE Bedienungsanleitung
Denon
Denon PMA-600NE Bedienungsanleitung
Denon
Denon PMA-50 Bedienungsanleitung
Denon
Denon PMA-700V Bedienungsanleitung
Denon
Denon PMA-2020AE Bedienungsanleitung
Denon
Denon PMA-2500N Bedienungsanleitung
Denon
Denon PMA-SA1 Bedienungsanleitung
Denon
Denon PMA-900HNE Bedienungsanleitung
Denon
Denon PMA-830 Bedienungsanleitung
Denon
Denon PMA-700AE Bedienungsanleitung
Denon
Denon AVR-1705 Bedienungsanleitung
Denon
Denon PMA-60 Bedienungsanleitung
Denon
Denon POA-S1 Bedienungsanleitung
Denon
Denon POA-3012CI - Multi-Zone Audio Distribution Power... Benutzerhandbuch
