Denon Professional DN-202WT Bedienungsanleitung
2
User Guide (English)
Introduction
DN-202WT is a wireless audio transmitter with professional-grade audio
outputs. In conjunction with our DN-202WR wireless receivers, this lets
you add wireless audio transmission to your audio system—reducing
cables and clutter without reducing sound quality.
Please see this guide’s Setup chapter to learn how to integrate DN-
202WT with your audio system.
Box Contents
DN-202WT User Guide
Power Adapter Safety & Warranty Manual
Support
For the latest information about this product (system requirements,
compatibility information, etc.) and product registration, visit denonpro.com.
3
Features
STATUS
ST.
PAIR MONO
DN-202WT
5V 3ADC
RL
PEAK
2.4GHZ WIRELESS AUDIO TRANSMITTER
INPUT
UNBAL.UNBAL.
BAL.
2
2
3
4516 7887
1. Power Input: Use the included power adapter to connect this input to
a power outlet. See Setup for more information.
2. Wireless Antenna: This antenna transmits the audio signal to a paired
DN-202WR within range. DN-202WT has a transmission range of 100
feet (30.5 meters).
3. Pair Button: Press and hold this button for 3 seconds to make DN-
202WT available for pairing to a nearby DN-202WR. See Setup for
more information.
3.4”
(88mm)
5.8”
(149mm)
1.8”
(45mm)
4
4. Status Light: This LED indicates the DN-202WT’s pairing status:
•Flashing slowly (approximately once per second):DN-202WT is
not paired to a DN-202WR.
•Flashing quickly (approximately twice per second):DN-202WT is
“searching” for a DN-202WR.
•Solidly lit: DN-202WT is paired to a DN-202WR.
5. Stereo/Mono Selector (St./Mono):Press this button to set the
outgoing wireless audio signal to stereo (raised position) or mono
(depressed position).
Note: For stereo operation, make sure the left (L) and right (R) inputs
are connected to left and right outputs, respectively.
6. Peak Lights: These LEDs light up when the incoming audio signal is
“clipping” (distorting) at levels higher than 0 dB. If this happens,
reduce the volume level of your audio source.
7. Inputs (Balanced XLR):Use XLR cables to connect these inputs to
your audio source (mixer, media player, etc.). See Setup for more
information.
8. Inputs (Unbalanced 1/4” /6.35mm):Use 1/4” (6.35 mm) cables to
connect these inputs to your audio source (mixer, media player, etc.).
See Setup for more information.
5
Setup
For an example of how you could set up DN-202WT, please see the
Example diagram later in this section.
Items not listed under Introduction > Box Contents are sold separately.
Important:
For stereo operation, make sure left and right inputs are connected to left
and right outputs, respectively.
Make sure DN-202WT and DN-202WR are within 100 feet (30.5 meters) of
each other.
Do not use DN-202WT near a microwave oven, which can interfere with
the reception.
1. Use XLR cables or 1/4” (6.35mm) cables to connect DN-202WT’s
inputs (balanced or unbalanced) to your mixer, media player, or other
audio source.
2. Use the included power adapter to connect DN-202WT’s power
input to a power outlet. It will power on immediately.
3. Connect your mixer, media player, or other audio source to a power
outlet, and then power it on.
6
4. Use XLR cables or 1/4” (6.35mm) cables to connect your DN-202WR’s
outputs (balanced or unbalanced) to your loudspeakers, mixer,
amplifier, or other device that accepts line-level inputs (make sure this
device is powered off).
5. Use the included power adapter to connect DN-202WR’s power
input to a power outlet. It will power on immediately.
6. Connect your loudspeakers, mixer, amplifier, or other output device to
a power outlet, but do not power it on yet.
7. Press and hold the Pair button on DN-202WT for 3 seconds. Its
Status Light will start flashing rapidly.
8. Within approximately 15 seconds, press and hold the Pair button on
DN-202WR for 3 seconds. Its Status Light will start flashing rapidly.
If you need to pair multiple DN-202WR units to DN-202WT, do this
step with all of them within the 15 seconds.
9. Wait until the Status Lights on both DN-202WT and DN-202WR are
solidly lit (not flashing), indicating that they are paired.
10. Power on your loudspeakers, mixer, amplifier, or other output devices.
You can now use DN-202WT and DN-202WR to play audio wirelessly.
8
Troubleshooting
If you encounter a problem, try doing these things first:
•Make sure all cables and other connected devices are properly and
securely connected.
•Make sure you are using DN-202WT as described in this User Guide.
•Make sure your other devices or media are working properly.
•If you believe DN-202WT is not working properly, check the following
table for your problem and solution.
Problem: Solution: Please see:
Power does not
turn on.
Make sure DN-202WT’s power input is
properly connected to a power outlet
using the included power adapter.
Setup
DN-202WT does
not produce any
sound, or the sound
is distorted.
Make sure all cable and device
connections are secure and correct.
Make sure none of the cables are
damaged.
Make sure the settings on your
loudspeaker, mixer, etc. are correct.
Setup
9
Problem: Solution: Please see:
DN-202WT does not
pair to a DN-202WR
or is having trouble
maintaining a
connection.
Make sure the power inputs of the DN-
202WT and DN-202WR are properly
connected to power outlets using the
included power adapters.
Make sure the DN-202WT and DN-
202WR are within 100 feet (30.5
meters) of each other.
If possible, remove any obstructions
between DN-202WT and DN-202WR.
If possible, power off or remove any
nearby devices that transmit on a 2.4
GHz frequency. These devices can
cause interference.
Setup
10
Guía del usuario (Español)
Introducción
El DN-202WT es un transmisor de audio inalámbrico con salidas de audio
de grado profesional. En conjunción con nuestros receptores inalámbricos
DN-202WR, le permite añadir la transmisión inalámbrica de audio a su
sistema de audio —reduciendo los cables y la aglomeración de equipos
sin reducir la calidad del sonido.
Consulte el capítulo Instalación de esta guía para aprender a integrar el
DN-202WT con su sistema de audio.
Contenido de la caja
DN-202WT Guía del usuario
Adaptador de corriente Manual sobre la seguridad y garantía
Soporte
Para obtener la información más reciente acerca de este producto
(requisitos de sistema, información de compatibilidad, etc.) y registrarlo,
visite denonpro.com.
Andere Handbücher für Professional DN-202WT
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere Denon Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
