Denver Electronics JST-9200 Bedienungsanleitung
Waterproof IP66 Jump Starter
User Manual
Article No.: JST-92
Product Overview
No. Function Description
1 ON/OFF button
(multifunctional)
Press this button to charge your devices.
Press this button to display the remaining capacity.
Press and hold this button to turn the flashlight on/off.
2 harging
indicator
Shows the charging progress: 25%, 50%, 75% and 100%.
3 LED Flashlight Flashlight modes: On, SOS, Flash, and Off.
4 Micro USB input
port
harge the jump starter via micro USB cable.
5 USB output port harge your devices via USB cable.
6 Jump start port Insert plug in jump start port.
7 Black clamp onnect black clamp to negative terminal of car battery.
8 Red clamp onnect red clamp to positive terminal of car battery.
9 Plug Insert plug in jump start port.
10 Battery clamp
indicator
Shows the status of the smart battery clamp.
11 Force start
button
Press this button if the car battery voltage is too low.
Recharging the Jump Starter
1. onnect the jump starter via micro USB cable to the power source.
2. Press the ON/OFF button to turn on the product. While charging the
jump starter, the battery level indicator flashes. Once it is fully
charged, all 4 battery level indicators will light up.
3. Unplug the cable when no charge is required.
Note:
When using the product for the first time, make sure that the jump
starter is fully charged.
Use the supplied micro USB cable to charge the product.
Wall adapter is not included.
Charging Your Phone or Other Products with the Jump Starter
1. onnect the jump starter and your phone or other electronic devices
via USB cable.
2. Press the ON/OFF button to turn the product on.
3. Unplug the cable when no charge is required.
LED Flashlight
Press and hold the ON/OFF button for 3 seconds to switcvh the flashlight
on. Press the ON/OFF button to toggle between On, SOS, Flash and Off
modes.
Jump Start Your Car
Note:
This product is suitable for cars with 12V electric system (up to 5. L
petrol or 3. L diesel engine) only.
heck to make sure that 3 to 4 charging indicators are illuminated
(battery level is above 50%) before using the device to jump start
your car.
Step 1: Insert the plug of the smart battery clamp completely into the
jump starter. If the green and red lights on the battery clamp are
flashing alternately, you are safe to move on to the next step.
Step 2: Connect the red clamp to the positive terminal (+) of the car
battery and connect the black clamp to the negative terminal (-) of the
car battery. If the green and red light indicators on the battery clamp are
flashing alternately, you are safe to move on to the next step.
However, if the red indicator light is on:
1. The battery clamps may be connected in reverse. If so, you need to
disconnect the battery clamps from the vehicle and the jump starter.
2. Adjust the clamps for maximum contact with the battery terminals.
Step 3a: Start your car.
If you failed to start your car, disconnect the battery clamps from the
vehicle and the jump starter. Wait for at least 30 seconds, and then
try again.
If your car failed to start after 3 attempts, use the force start
function. See step 3b.
Step 3b (optional): Force start function. First ensure that the clamps are
connected to the correct battery terminal. Then, press and hold the
force start button for 3 seconds to start your car. When the indicator of
the smart clamp lights up green, you need to start the vehicle within
30s.
Step 4: Once your car is started, remove the battery clamps from the car
battery and the jump starter within 30 seconds.
In the following situations, the smart clamp turns protection on.
LED Indicator Situation
The red and green LED
flash in turn
Ready to work.
The green LED is always
on
Work status.
The red LED is always on 1. Battery clamps are reversed.
- heck whether the clamps are reversed.
2. The clamp is short-circuited.
- heck whether the two clamps touch each
other or if both clamps touch the same piece of
metal.
The red LED flashes slowly Reverse charging protection, the voltage of the
car battery is higher than 12.6V.
- No jump starter needed, the car battery can
start your car.
The red light flashes
quickly
The temperature of the clamp exceeds 65 (+/-5)
° .
- Remove the clamp until the red and green LED
flash in turn.
The green LED flashes
slowly
The voltage of the jump starter is too low.
- Try to replace the jump starter or charge it in
time.
Safety Precautions
1. Use the original smart battery clamps to start the car.
2. Do not use this unit if any cable, clamp or cord is damaged.
3. Do not connect two clamps together when the product is turned on.
Do not connect both cable clamps to the same piece of metal.
Otherwise, the jump starter will be damaged.
Care and Maintenance
1. Do not use the product to start a bulging car battery.
2. Store the product in a cool, well-ventilated area.
3. Handle the product with care and do not abuse it. Avoid dropping or
striking the product heavily and repeatedly.
4. Do not disassemble or modify the product.
5. DO NOT use detergents to clean the product.
6. DO NOT place the product for an extended period in a high-
temperature environment. The operating temperature of this
product is -20 to +60°C. The storage temperature of the product
should not exceed 50°C/122°F.
7. heck the battery level of the product at least once every three
months and charge the product in time.
8. Keep the product away from children and pets.
Specifications
Model JST-9200
apacity 9,200mAh
Micro USB input 5V/1.5A
Output 5V/2.1A
Start current 380A (for 1s)
Peak current 760A (for 0.2s)
Short circuit protection Effective
Over-discharge protection ≤13V± 0.3V
Over-temperature protection > 65°C±5 °C
Reverse polarity protection Effective
Reverse charging protection ≥(12.6V ±0.3V)
Dimensions (L x W x H) 158 x 88 x 33mm
FAQ
Q: How do I turn off the product?
A: This product will power off automatically when no load is detected or
when charging is complete.
Q: How long does it take to fully charge the jump starter?
A: About 7 - 8 hours via the micro USB input port.
Q: How many times can this product start the vehicle with full capacity?
A: About 18 times.
Q: How many times can this product fully charge my cell phone?
A: It depends on the battery capacity of your cell phone. For example, an
iPhone 8 can be fully charged 2 times.
Q: What are the safety protections of the smart battery clamp?
A: Short-circuit protection, over-temperature protection, over-voltage
protection, over-charge protection, over-discharge protection, over-
current protection and reverse polarity protection.
Package Contents
1 x 9,200mAh Jump Starter
1 x Smart Battery lamp
1 x Micro USB able
1 x User Manual
1 x olor Box
Please notice - All products are subject to change without any notice.
We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, OPYRIGHT DENVER ELE TRONI S A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric
and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen above. This symbol signifies that
electric and electronic equipment and batteries should not be disposed
of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to
Inhaltsverzeichnis
Sprachen:
