TABLE OF CONTENTS
1. To avoid possible electric shock, turn off the electricity at the main fuse box or
circuit panel before you begin the fan installation or before servicing the fan or
installing accessories.
2. CAUTION: READ ALL INSTRUCTIONS AND SAFETY INFORMATION
CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE
INSTRUCTIONS.
3. Make sure all electrical connections comply with local codes or ordinances and
the national electrical code. If you are unfamiliar with electrical wiring, please use
a qualified and licensed electrician.
4. Make sure you have a location selected for your fan that allows clear space for
the blades to rotate, and at least seven (7) feet of clearance between the floor
and the fan blade tips. The fan should be mounted at least thirty (30) inches from
walls or other upright structures.
5. WARNING: The outlet box and ceiling support joist used must be securely
mounted, and capable of supporting a minimum of 50 pounds.
6. WARNING: To reduce the risk of fire, electrical shock, or personal injury mount to
outlet box marked” Acceptable For Fan Support” and use mounting screws (and
locked washers) provided with the outlet box.
7. Electrical diagrams are for reference only. Light kits that are not packed with the
fan must be UL listed and marked suitable for use with the model fan you are
installing.
8. After installation is complete, check that all connections are absolutely secured.
9. After making electrical connections, spliced conductors should be turned upward
and pushed carefully up into outlet box. The wires should be turned spread apart
with the grounded conductor and the equipment-grounding conductor on one side
of the outlet box.
10. WARNING: To reduce the risk of fire, electrical shock. Do not use this fan with
any solid-state fan speed control device, or rheostat.
11. Do not insert anything into the fan blades while they are rotating.
12. WARNING: To reduce the risk of personal injury, do not bend the blade brackets
when installing the brackets, balancing the blades, or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
13. To avoid personal injury or damage to the fan and other items, be cautious when
working around or cleaning the fan.
14. Do not use water or detergents when cleaning the fan or fan blades. A dry dust
cloth or lightly dampened cloth will be suitable for most cleaning.
15. Instructions for supply connections: conductor of a fan identified as grounded
conductor to be connected to a grounded conductor of power supply, conductor of
fan identified as ungrounded conductor to be connected to an ungrounded
conductor of power supply, conductor of fan identified for equipment grounding to
be connected to an equipment-grounding conductor.
NOTE: The important safety precautions and instructions appearing in this manual are
not meant to cover all possible conditions and situations that may occur. It must be
understood that common sense and caution are necessary factors in the installation
and operation of this fan.
CAUTION: To reduce the risk of injury to person, install fan so that the blade is at least
2.1 Meters (7 Feet) above the floor.
SAFETY TIPS
Page 2
