Device Functions AR0485E Bedienungsanleitung
DEVICE
FUNCTIONS
____________________________________________________________________________________________________________
Device Functions www.devicefunctions.com info@devicefunctions.com
AR0485E
Bluetooth RS485 RS422 Adapters with RJ Connector RJ9 RJ10 RJ11 RJ12 RJ45
Features
- RS485/RS422 interface with RJ connector
- Half-duple data communication
- ESD, EFT, and surge protection
- Customer defined connector pin assignments
- Bluetooth Class 1 Radio
- Integrated antenna
- Data encryption
- Support Microsoft Windows Bluetooth COM port
- LED indicator
- Configuration via USB
Specifications
Bluetooth v2.1 + EDR Bluetooth
Class 1 Radio
Half-duple transceiver
1/8-unit-load receiver input impedance or up to 256 transceivers on one bus
True fail-safe receiver
No integral 120Ohm termination resistor
4P4C, 6P6C, or 8P8C modular plug connector
Baud rate: 300bps to 115200bps
Parity: Even, Odd, None, Mark, Space
Data length: 5-bit, 6-bit, 7-bit, 8-bit
RS485/RS422
Stop bits: 1-bit, 2-bit
USB USB 2.0, USB Micro-B receptacle connector
Software Microsoft Windows 8, Windows 7, Windows Vista, eeTerminal.
Power +5v DC power supply
Typical Application - Microsoft Windows Bluetooth COM Port
This application requires install this Bluetooth adapter on Microsoft Windows, and Bluetooth connection to computer is required. A virtual
COM port is created for this adapter after installation. User application software can access this adapter’s RS485/RS422 interface using
the virtual COM port. Here are the steps to install this adapter on Microsoft Windows. The adapter’s authentication pin code is 1234.
Method 1 - Install Bluetooth Adapter Using eeTerminal Power on Bluetooth adapter. Starts eeTerminal. Select File from menu bar,
and select Open Device. The software lists all compatible devices in a pop-up window. Select the Bluetooth device from the list and click
the Open button. Follow the on-screen instructions to install the device if this Windows version supports automatic device installation.
Method 2 - Install Bluetooth Adapter Using Windows Bluetooth Device Manager Power on Bluetooth adapter. Locate Bluetooth icon
on Microsoft Windows taskbar. Click on it and select Add a Bluetooth Device. Follow Microsoft Windows on-screen instructions to
install the device.
After Windows successfully installs the Bluetooth adapter, a virtual COM port (Outgoing direction) with SPP description will be created.
To check the COM port number, click on Windows taskbar and select Open (Bluetooth) Settings. Click COM Ports in Bluetooth
Settings window.
LED Indicator - Bluetooth connection
Status LED Flash Rate
Connected Solid on
Waiting for connection Once per second
DEVICE
FUNCTIONS
____________________________________________________________________________________________________________
Device Functions www.devicefunctions.com info@devicefunctions.com
Assembling and RS485 RS422 Signals
The modular plug connector can be assembled by us if pin assignments are provided. The pins of the 4P4C,
6P6C, 8P8C plug connectors are numbered sequentially 1 to 4, 1 to 6, 1 to 8. Pin 1 is on the left when the
connector is viewed with the retention mechanism on the bottom and the cable opening toward the viewer. An
integral 120 Ohm termination resistor can be installed if requested. RS485/RS422 signals are,
Wire Pin Terminal Color RS485/RS422 Signal
Green T D+/R D+ (A)
White T D-/R D- (B)
Red +5v Power Input
Black Power GND Input
Ordering Information
Part Number Connector Type RJ Connector
AR0485E44 4P4C RJ9, RJ10, RJ22
AR0485E66 6P6C RJ11, RJ12, RJ14, RJ25
AR0485E88 8P8C RJ45
RS485 RS422 Serial Configuration
The adapter’s serial settings are configured using eeTerminal (download from www.devicefunctions.com). If the adapter is powered from
RS485/RS422 port, disconnect the adapter. Connect the adapter’s USB port to a computer’s USB port. Start eeTermianl, click File from
menu bar, and select Open Device. eeTerminal lists all compatible devices in a pop-up window. Select DEVICE FUNCTIONS
UART RS485 and click the Configure button. A device configuration window will pop up. Select the required serial settings and click Ok
to save the new settings, or click Cancel to cancel the configuration.
Accessories
eeTerminal
Configure, read, and write Bluetooth adapters. Upload/download files.
Environmental Conditions
Operating temperature range -20°C TO +65°C
Storage temperature range -40°C TO +85°C
Relative humidity 0% to 90%, non-condensing
©2015 Device Functions. All right reserved.
Inhaltsverzeichnis
Andere Device Functions Adapter Handbücher
