6
Batteries
Always keep batteries away from open flame and high temperatures. Avoid direct
sunlight and heat radiation!
Always remove all batteries from battery-operated devices that are only in storage
and are not in use. Old batteries can leak and damage the device!
Do not use rechargeable batteries!
When inserting the battery, make sure the polarity is correct. Using the battery in-
correctly can damage the device!
The Home Control Motion Sensor requires a commercially available CR123(A) lithium battery. For
information on replacing the battery, please refer to the Home Control online help.
Registering the Home Control Motion Sensor on the control unit (e.g. devolo Home Control Central
Unit)
Only use the Home Control Motion Sensor indoors.
Avoid placing the Home Control Motion Sensor in direct sunlight or radiant heat!
Without installing it, place the Home Control Motion Sensor near the location you would like it to be
(such as a door frame or passageway).
When you plug in the Home Control Central Unit from devolo, follow the description in the section
devolo Home Control on page 3 to call up your Home Control Central Unit and select Devices
