DeWalt Vertikut Bedienungsanleitung

Attaching your DeWalt deep cut band saw to the Vertikut stand

1. Unplug the saw and remove the blade.

2. Remove the cutting guide from your saw by removing the two flathead screws

that hold it on.

3. Take the assembled stand and find the two counterbored holes in the table top.

The tabletop goes on to the saw in place of the cutting guide you just removed.

4. Line up the holes on the tabletop with the nuts in the saw and thread in the

flatheads on at a time.

5. Re-install the blade making sure to slide it into the slot in the tabletop as you put it

into position on the saw.

WARNING!!!!

Read and understand the entire contents of this

sheet before attempting set-up or operation of this equipment

•This product is designed and intended for use by properly trained and experienced personnel only.

If you are not familiar with the proper safe use of hand band saws, DO NOT USE THIS PRODUCT

UNTIL PROPER TRAINING AND KNOWLEDGE HAS BEEN OBTAINED.

•Reduce the risk of unintentional starting. Make sure switch is in the OFF position before plugging in

the saw.

•Use the right blade. Do not force a blade to cut a material for which it was not designed.

•Maintain tools with care. Keep blade sharp and clean for best and safest performance. Follow saw

manufacturers instructions for changing blades.

•Always disconnect the saw from the power source before adjusting, servicing or changing blades.

•Check for damaged parts. Check for alignment of moving parts, breakage of parts, mounting, and any

other condition that may affect the tools operation. Any part that is damaged should be repaired or

replaced.

•Turn power off. Never leave a saw unattended. Do not leave saw until it comes to a complete stop.

•Keep work area clean. Cluttered areas and benches invite accidents.

•Do not use in a dangerous environment. Do not use power tools in damp or wet locations, or expose

them to rain. Keep work area well lighted.

•Keep children and visitors away. All visitors should be kept a safe distance from the work area.

•Make the workshop child proof. Use padlocks, master switches, remove starter keys or unplug all

tools.

•Wear proper apparel. Loose clothing, gloves, neckties, rings, bracelets, or other jewelry may get

caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain

long hair.

•Always use safety glasses. Every day glasses only have impact resistance lenses; they are not safety

glasses.

•Do not overreach. Keep proper footing and balance at all times.

•Do not place hands near the blade while cutting.

•Read and understand all warnings provided by saw manufacturer.

•Failure to comply with all of these warnings may result in serious injury.

April 29, 2008

Inhaltsverzeichnis

Andere DeWalt Rack & Stand Handbücher

DeWalt

DeWalt DW7451 Bedienungsanleitung

DeWalt

DeWalt DWE74911 Bedienungsanleitung

DeWalt

DeWalt DWE74911 Bedienungsanleitung

DeWalt

DeWalt DE7260 Bedienungsanleitung

DeWalt

DeWalt DW723 Bedienungsanleitung

DeWalt

DeWalt DE7035 Bedienungsanleitung

DeWalt

DeWalt DW7350 Bedienungsanleitung

DeWalt

DeWalt D24001 Bedienungsanleitung

DeWalt

DeWalt DE7035 Bedienungsanleitung

DeWalt

DeWalt DWX725 Bedienungsanleitung

DeWalt

DeWalt DW7451 Bedienungsanleitung

DeWalt

DeWalt DE7450 Bedienungsanleitung

DeWalt

DeWalt DXST4500PBK Bedienungsanleitung

DeWalt

DeWalt DWE74911 Bedienungsanleitung

DeWalt

DeWalt DXST10000PBK Bedienungsanleitung

DeWalt

DeWalt DXST4500DK Bedienungsanleitung

DeWalt

DeWalt DXST10000 Bedienungsanleitung

DeWalt

DeWalt DXST10000EXT Bedienungsanleitung

DeWalt

DeWalt DWX723-XE Bedienungsanleitung

DeWalt

DeWalt DXST10000 Bedienungsanleitung

DeWalt

DeWalt DWST82800 Bedienungsanleitung

DeWalt

DeWalt DCAVR332 Bedienungsanleitung

DeWalt

DeWalt DE6501 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung