Dexin NDS3558A Bedienungsanleitung
NDS3558A Network Encoder
User Manual
Thank you for choosing our network encoder.
Please read this manual carefully to install, use and maintain the network encoder in the best conditions of
performance. Keep this manual for future reference.
Directory
CHAPTER 1 Product Introductions........................................................................ 1
General Description ................................................................................................ 1
System Connection Samples................................................................................... 2
Key Features ........................................................................................................... 2
Technical Specifications.......................................................................................... 2
CHAPTER 2 Safety Instruction and Installations................................................... 4
Safety Instructions................................................................................................... 4
Installations............................................................................................................. 4
CHAPTER 3 Operations of TS Creator Software................................................... 7
Installation............................................................................................................... 7
Operations of “Creator” .......................................................................................... 7
File Management..................................................................................................... 9
CHAPTER 5 Operations of Record TS and Play TS through USB Disk.............. 14
CHAPTER 6 Operations of Web-GUI.................................................................. 17
Login..................................................................................................................... 17
Operation............................................................................................................... 18
Chapter 7 Network Connection and Setup............................................................ 27
Situation 1: LAN network ...................................................................................... 27
Situation 2: WAN network..................................................................................... 29
1
CHAPTER 1 Product Introductions
General Description
NDS3558A network encoder is an encoding device for IP broadcasting. The signals source could
be from STB, PC, TV and etc. It can transfer the live program through the internet/LAN, and the
output signals are to be received by PC, phone and other mobile terminals. Dexin NDS3558A lets
you access your IP STB, PC or TV anywhere to watch your programs. Whether you are in your
house or across the globe, you'll never miss a game or your favorite show.
The device supports HDMI/YPbPr/S-Video/AV/USB input and encodes in MPEG 4 AVC/H.264
format, after that, it gives the IP signal output over UDP (multicast/Unicast), RTP/RTSP, HTTP,
HLS.
The USB port is designed to record and save the encoded video (TS) in ts files in the USB Keys or
Hard Disks and play it back through IP out to increase your content options.
Ethernet port for
web management
2
System Connection Samples
Key Features
Watch and control your live and recorded TV shows anywhere, anytime –up to
Full HD
Support HDMI/YPbPr/S-Video/AV/USB input
Support IP Output over UDP (Unicast/multicast), RTP/RTSP, HTTP, HLS
Absolutely no monthly fees
Easy to connect and set up
HLS Protocol supporting 6-10 Apple terminals simultaneously running as per
different resolution and bit rate setting
USB port for TS recording and playing back, increase signal source option
Technical Specifications
Encoder
Section
HDMI input
Video
Resolution
1920x1080_60p, 1920x1080_50p
1920x1080_60i, 1920x1080_50i
1280x720_60p, 1280x720_50p
720x576_50i, 720x480_60i
Encoding
MPEG-4 AVC/H.264
Bit rate
1Mbps~19Mbps
Audio
Encoding
MPEG1 Layer II, MPEG2-AAC,
MPEG4-AAC
Sample rate
48KHz
Bitrate
64, 96, 128, 192, 256, 320, 384kbps
3
YPbPr/CVBS/S-Video
(with an adapter to
VGA)
Video
Encoding
MPEG-4 AVC/H.264
Interface
CVBS *1, YPbPr*1, S-Video*1
Resolution
CVBS & S-Video:
720x576_50i (PAL); 720x480_60i (NTSC)
YPbPr:
1920*1080_60i, 1920*1080_50i;
1280*720_60p, 1280*720_50P
Bit rate
1Mbps~19Mbps
Audio
Encoding
MPEG1 Layer II, MPEG2-AAC,
MPEG4-AAC
Interface
1*Stereo /2*mono
Sample rate
48KHz
Bit rate
64, 96,128, 192, 256, 320, 384kbps
Stream out
IP out over UDP(Unicast/multicast), RTP/RTSP, HTTP, HLS (RJ45, 1000M)
System
Local control
LCD + control buttons
Remote control
Web-server NMS
Language
Chinese-English control interface
Upgrade
USB/Web-server
General
Approx weight
≤1Kg
Operation temperature
0~45℃
Power supply
DC12V
Dimensions
183*110*45mm
4
CHAPTER 2 Safety Instruction and Installations
Safety Instructions
WARNING: Hot plug is not allowed since it may cause system halted.
To prevent fire or electrical shock, do not expose the device to rain or moisture.
The network encoder is powered with a voltage of 12V DC. The power supply
voltage must not exceed the recommended voltage, which otherwise may cause
irreparable damage to the device and the invalidation of the warranty. Therefore:
Do not replace power supply with a voltage greater than 12V DC.
Do not connect the device to the power if the power cord is damaged.
Do not plug the device into mains supply until all cables have been connected
correctly.
Do not cut the cord.
Avoid placing the device next to central heating components and in areas of high
humidity.
Do not cover the device with elements that obstruct the ventilation slots.
If the network encoder has been kept in cold conditions for a long time, keep it in a
warm room minimum 2 hours before plugging into the mains.
Mount the device in vertical position with the connectors located on the top side.
When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutes may result in fire, electric shock or other hazards.
Safety check- Upon completion of any service or repairs to this device, ask the service
technician to perform safety checks to determine that the device is in proper condition.
Installations
RISK OF damage to the unit
Mechanically handling the unit may result in damage. Do not connect the unit to the
power supply before or during assembly. Connect the unit as below instructed.
5
NO HOT PLUG!
1. Mount and tighten the
screws and plugs to
secure the unit to the
wall. Left 10 cm of
free space around
from each unit.
2. Connect the signal input in the respective connectors. The signal source can be from a surveillance
monitor, DVD, set-top box, CCTV and etc.
3. In case of
connecting to a
wired network,
connect the
encoder Ethernet
port and
terminal's
Ethernet port
wiht ethernet
cable.
4. In case of connecting wireless network, following Step 2, connect the encoder Ethernet port and
router port with Ethernet cable.
5. Power supply connection: a) Connect the earth cable; b) Connect the power plug to the unit mains
connector; c) Connect the power plug to the mains socket.
2
4
1
3
5
6
TS Creator.exe Download link:
http://pan.baidu.com/s/1c0vOMY0
Download path: English→Tool→TS Creator xxx.rar
7
CHAPTER 3 Operations of TS Creator Software
NDS3558A network encoder has a function to create TS videos with the software
supplied with the product. Users can create *.ts files containing images, videos and
audios in a simple and intuitive way, and play them on a television through
NDS3558A‟s USB port.
File format supported include:
Image: JPG, PNG, BMP, GIF/Video: MP4, WMV, AVI, MPG, TS, MKV… /Audio:
MP3, WAV
Installation
1. Download our “TS Creator” software package on your PC to get the installer and
its auxiliary routine.
2. Occasionally, if your PC hasn‟t installed “Net Frame 2.0” yet, double-click
“NetFx20SP2_x86.exe” until complete the installation.
3. Double-click “Setup.exe” application to install the “Creator” and generate a
desktop shortcut.
Operations of “Creator”
Double-click the “Creator” shortcut icon , it will trigger an operation interface like
below:
8
To set time duration for every picture when
playing the video
To set the resolution for the output video
The video is transformed based on VBR (Variable
Bit Rate). The number set here represents the highest bit rate for the output video and
bit rate will varies under the number.
Click to add audios
Click to set a save path for the TS video to be created.
Click to add Images and videos
Click to adjust the order of Images/videos
Click to delete the Images/videos
Inhaltsverzeichnis
Andere Dexin Medienkonverter Handbücher
