DFI 845GV-MLV Bedienungsanleitung
845GV-MLV
Rev. C+
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
Ðóêîâîäñòâî Ïîëüçîâàòåëÿ
935-845GV3-000
72530337
Copyright
This publication contains information that is protected by copy-
right. No part of it may be reproduced in any form or by any
means or used to make any transformation/adaptation without
the prior written permission from the copyright holders.
This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to
the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any
particular purpose.The user will assume the entire risk of the use or
the results of the use of this document. Further, the manufacturer
reserves the right to revise this publication and make changes to its
contents at any time, without obligation to notify any person or
entity of such revisions or changes.
© 2003. All Rights Reserved.
Trademarks
Windows®98 SE, Windows®ME, Windows®2000, Windows NT®
4.0 and Windows®XP are registered trademarks of Microsoft
Corporation. Intel®and Pentium®4 are registered trademarks of
Intel Corporation. Award is a registered trademark of Award Soft-
ware, Inc. Other trademarks and registered trademarks of prod-
ucts appearing in this manual are the properties of their respec-
tive holders.
Caution
To avoid damage to the system:
• Use the correct AC input voltage range.....
To reduce the risk of electric shock:
• Unplug the power cord before removing the system chassis
cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery:
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend
by
the manufacturer.
• Dispose of used batteries according to the battery
manufacturer’s
instructions.
Joystick or MIDI port:
• Do not use any joystick or MIDI device that requires more than
10A current at 5V DC. There is a risk of fire for devices that
exceed this limit.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for
help.
Notice:
1. The changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
2. Shielded interface cables must be used in order to comply with
the emission limits.
4
Quick Setup Guide
1
Quick Setup
Guide
Table of Contents
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français....................................................................
Chapter 4
Deutsch...............................................................................
Chapter 5
Español............................................................................
Chapter 6
Ðóññêèé......................................................................
5
12
16
20
24
28
The user’s manual in the provided CD contains detailed information about the system
board. If, in some cases, some information doesn’t match those shown in this manual, this
manual should always be regarded as the most updated version.
Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte
de système. Si, en quelque cas, quelque renseignement n’appareille de ce que dit dans ce
manuel, ce manuel doit toujours être considéré comme la plus nouvelle version.
Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die
Hauptplatine. Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen
dargestellt in diesem Handbuch entsprechen, soll dieses Handbuch als die meist
aktualisierte Ausgabe gelten.
El uso explicativo contene información detalle sobre la sistema board en el CD preparativo.
Si en algún caso, la información no es igual con el uso explicativo, necesita ver el uso
explicativo, esque es más nuevo.
 ðóêîâîäñòâå ïîëüçîâàòåëÿ íà ïðåäîñòàâëÿåìîì CD äèñêå ñîäåðæèòñÿ
ïîäðîáíàÿ èíôîðìàöèÿ î ìàòåðèíñêîé ïëàòå. Èíîãäà íàïå÷àòàííîå
ðóêîâîäñòâî ìîæåò íå ñîâïàäàòü ðóêîâîäñòâîì íà CD, òàê êàê ïîñëåäíåå
íàèáîëåå ÷àñòî îáíîâëÿåòñÿ è ÿâëÿåòñÿ ñàìûì ñâåæèì.
5
1
Quick Setup Guide
Quick Setup
Guide
1.1 System Board Layout
Chapter 1 - Quick Setup Guide
6
Quick Setup Guide
1
Quick Setup
Guide
1.2 Jumper
1.2.1 Jumper Settings for Clearing CMOS Data
1.3 Rear Panel I/O Ports
PS/2
Mouse
RJ45
LAN Parallel GAME/MIDI
USB 1-2 COM 1 VGA Line-
out Line-
in Mic-
in
PS/2
K/B
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
!
JP1 3
1
23
1
2
7
1
Quick Setup Guide
Quick Setup
Guide
1.4 I/O Connectors
1.4.1 Universal Serial Bus Ports
USB 2
USB 1 "
USB 3-4 USB 5-6
1
VCC
-Data
+Data
Ground
Key
VCC
-Data
+Data
Ground
N. C.
210
9"
1.4.2 CD-in Internal Audio Connector
"
14
Right audio
channel
Left audio
channel
Ground Ground
8
Quick Setup Guide
1
Quick Setup
Guide
1.4.3 Audio Jacks
"
"
Line-out
Line-in
Mic-in
1
Mic
Mic Power
AuD_R_Out
N. C.
AuD_L_Out
GND
AuD_Vcc
Key
210
9
AuD_R_Return
AuD_L_Return
1.4.4 Floppy Disk Drive Connector
!
1
33 34
2
9
1
Quick Setup Guide
Quick Setup
Guide
1.4.6 Cooling Fan Connectors
!
1
3N. C.
Power
Ground
!
13
Ground
Power
N. C.
1.4.5 IDE Disk Drive Connector
!
!
40 39
21
40 39
21
IDE 1IDE 2
IDE 2
IDE 1
CPU fan
Chassis fan
10
Quick Setup Guide
1
Quick Setup
Guide
1.4.7 Power Connectors
+12V
10
1
20
11 3.3V
3.3V
Ground
+5V
Ground
+5V
Ground
PW-OK
5VSB
+5V
3.3V
-12V
Ground
PS-ON
Ground
Ground
Ground
-5V
+5V
!
+12V 43
12 GroundGround +12V
!
1.4.8 IrDA Connector
"
15
VCC
N. C.
IRRX
Ground
IRTX
Andere Handbücher für 845GV-MLV
1
Inhaltsverzeichnis
Sprachen:
Andere DFI Hauptplatine Handbücher
DFI
DFI P2XLX Bedienungsanleitung
DFI
DFI SD100-H110/Q170 Bedienungsanleitung
DFI
DFI HR100-CRM Bedienungsanleitung
DFI
DFI CA230-BF Bedienungsanleitung
DFI
DFI AK70 Bedienungsanleitung
DFI
DFI PT332-DRM Bedienungsanleitung
DFI
DFI AD72-SC Bedienungsanleitung
DFI
DFI NT70-SC Bedienungsanleitung
DFI
DFI CA34-SC Bedienungsanleitung
DFI
DFI CMS171 Bedienungsanleitung
DFI
DFI LanParty 865PE Bedienungsanleitung
DFI
DFI SD330 Bedienungsanleitung
DFI
DFI CS632-Q370 Bedienungsanleitung
DFI
DFI AL701 Bedienungsanleitung
DFI
DFI G586OPB Bedienungsanleitung
DFI
DFI LanParty UT RDX200 series Bedienungsanleitung
DFI
DFI CA64-EC Bedienungsanleitung
DFI
DFI G586OPC Bedienungsanleitung
DFI
DFI LanParty LT X38 series Bedienungsanleitung
DFI
DFI NB72-SC Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
