DFI AD76 RAID Bedienungsanleitung
AD76 RAID
Rev.A+
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
59700225
935-AD7601-000
Copyright
This publication contains information that is protected by copyright.
No part of it may be reproduced in any form or by any means or
used to make any transformation/adaptation without the prior
written permission from the copyright holders.
This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to
the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any
particular purpose.The user will assume the entire risk of the use or
the results of the use of this document. Further, the manufacturer
reserves the right to revise this publication and make changes to its
contents at any time, without obligation to notify any person or
entity of such revisions or changes.
© 2002. All Rights Reserved.
Trademarks
Microsoft®MS-DOS®, WindowsTM, Windows®95, Windows®98,
Windows®98 SE, Windows®ME, Windows®2000, Windows NT®
4.0 and Windows®XP are registered trademarks of Microsoft
Corporation. AMD, AthlonTM XP, AthlonTM and DuronTM are
registered trademarks of Advanced Micro Devices, Inc. VIA is a
registered trademark of VIA Technologies, Inc. Award is a registered
trademark of Award Software, Inc. Other trademarks and registered
trademarks of products appearing in this manual are the properties
of their respective holders.
Caution
To avoid damage to the system:
• Use the correct AC input voltage range.....
To reduce the risk of electric shock:
• Unplug the power cord before removing the system chassis
cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery:
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend
by
the manufacturer.
• Dispose of used batteries according to the battery
manufacturer’s
instructions.
Joystick or MIDI port:
• Do not use any joystick or MIDI device that requires more than
10A current at 5V DC. There is a risk of fire for devices that
exceed this limit.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for
help.
Notice:
1. The changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
2. Shielded interface cables must be used in order to comply with
the emission limits.
4
Quick Setup Guide
1
Quick Setup
Guide
Table of Contents
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français (French).................................................
Chapter 4
Deutsch (German)................................................
Chapter 5
Español (Spanish)..................................................
5
26
46
67
89
Note:
The user’s manual in the provided CD contains detailed information
about the system board. If, in some cases, some information doesn’t
match those shown in this manual, this manual should always be
regarded as the most updated version.
5
1
Quick Setup Guide
Quick Setup
Guide
Chapter 1 - Quick Setup Guide
Table of Contents
1.1 System Board Layout..................................................................................................
1.2 Jumpers.....................................................................................................................................
1.3 Ports and Connectors................................................................................................
1.4 Award BIOS Setup Utility.......................................................................................
6
7
10
21
Important:
To ensure proper boot up and operation of your system, you must
power-off the system then turn off the power supply’s switch or
unplug the AC power cord prior to altering the setting of a jumper
or replacing the CPU.
6
Quick Setup Guide
1
Quick Setup
Guide
1.1 System Board Layout
J1
KB
Mouse
J2
USB 1
USB 2
LAN
ATX p ower
(J19)
CPU fan (J18)
COM 1 (J3)
Parallel (J4)
COM 2 (J5)
Game/MIDI (J8)
Line
out
(J6)
Line
in
(J7)
Mic
in
(J9)
CD-in (J12)
AUX-in (J15)
Front audio (J13)
9
10
2
1
Realtek
RTL8100
Second chassis
fan (J26)
Socket 462
AC’97
Winbond
W83697HF
BIOS IrDA (J17)
VIA
VT6202
DIMM standby
power LED
DDR 1
VIA
KT333
VIA
VT8233ACE
DDR 2 DDR 4
DDR 3
USB 2.0 (J22)
Wake-On-
LAN (J23)
Wake-On-
Ring (J24)
1
11
5
15
Promise
20276
USB 1.1 (J25)
Chassis fan
(J21)
RESET
SPEAKER HD-LED
Battery
Primary
IDE (J27)
Secondary
IDE (J29)
FDD
(J34)
Clear
CMOS
(JP5)
CPU FSB
select (JP4)
RAID Primary
IDE (J31)
RAID Secondary
IDE (J35)
J35
J28
Wake-On-
USB 2.0
KB/Mouse
(J11)
USB 2.0
(J20)
G-SW
G-LED
PWR-LED
ATX-SW
PS/2 KB/Mouse power select (JP1)
9
10
2
1
10
2
9
1
RAID
setting (JP2)
PCI standby
power LED
AGP Slot
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
PCI Slot 6
S/PDIF-out (J38)
7
1
Quick Setup Guide
Quick Setup
Guide
1.2 Jumpers
1.2.2 CPU’s Front Side Bus - JP4
To ensure proper boot up and operation of your system, you must power-
off the system then turn off the power supply’s switch or unplug the AC
power cord prior to altering the setting of the jumper.
1.2.1 Clear CMOS Data - JP5
Clear CMOS
(JP5)
123
123
123
1-2 On:
Normal (default)
2-3 On:
Clear CMOS Data
CPU FSB
select (JP4)
1
2
21
21
On:
100MHz (200MHz FSB)
(default)
Off:
133MHz (266MHz FSB)
8
Quick Setup Guide
1
Quick Setup
Guide
1.2.3 Power Select for PS/2 (JP1)
1.2.4 Wake-On-USB 2.0 Keyboard/Mouse - J11
PS/2 KB/Mouse
power select (JP1)
1
2
3
1
2
3
1
2
3
1-2 On: 5V
(default)
2-3 On: 5VSB
Wake-On-USB 2.0
KB/Mouse (J11)
123
123
123
1-2 On:
Enable - 5VSB power
(default)
2-3 On:
Disable - VCC power
9
1
Quick Setup Guide
Quick Setup
Guide
1.2.5 RAID Settings - JP2
RAID setting
(JP2)
123
123
123
1-2 On:
Disable the RAID function
2-3 On:
Enable the RAID function
(default)
10
Quick Setup Guide
1
Quick Setup
Guide
1.3 Ports and Connectors
1.3.1 PS/2 Mouse and PS/2 Keyboard Ports
Make sure to turn off your
computer prior to connecting or
disconnecting a mouse or keyboard.
Failure to do so may damage the
system board.
PS/2 Mouse
PS/2 Keyboard
J1
Mouse
(Green)
KB
(Purple)
1.3.2 RJ45 Fast-Ethernet Port
J2
RJ45
LAN
RJ45 LAN
Andere Handbücher für AD76 RAID
1
Andere DFI Hauptplatine Handbücher
DFI
DFI RNO171 Bedienungsanleitung
DFI
DFI 748-AL Bedienungsanleitung
DFI
DFI AD76 RAID Bedienungsanleitung
DFI
DFI SU173 Bedienungsanleitung
DFI
DFI CS636-C246 Bedienungsanleitung
DFI
DFI G586VPM Bedienungsanleitung
DFI
DFI G586OPA Bedienungsanleitung
DFI
DFI OT951-D Series Bedienungsanleitung
DFI
DFI KM266Pro-MLV Bedienungsanleitung
DFI
DFI LANPARTY DK X58-T3EH6 Bedienungsanleitung
DFI
DFI CR100-CRM Bedienungsanleitung
DFI
DFI LanParty UT nF3 Ultra-D Bedienungsanleitung
DFI
DFI G5C100-B Bedienungsanleitung
DFI
DFI SR330-N Bedienungsanleitung
DFI
DFI K8M800 INFINITY Bedienungsanleitung
DFI
DFI AK34-SC Bedienungsanleitung
DFI
DFI CB50-V3 Bedienungsanleitung
DFI
DFI CS35-EC Bedienungsanleitung
DFI
DFI NB71-BC Bedienungsanleitung
DFI
DFI Infinity NF-ULTRA-M2 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
