DFI AD77 INFINITY Bedienungsanleitung

AD77 INFINITY

AD 77 Pro

Rev. B+

System Board User’s Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Manual del Usuario de Placas Base

935-AD7703-000

60850307

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft®MS-DOS®, WindowsTM, Windows®95, Windows®98,

Windows®98 SE, Windows®ME, Windows®2000, Windows NT®

4.0 and Windows®XP are registered trademarks of Microsoft

Corporation. AMD, AthlonTM XP, AthlonTM and DuronTM are

registered trademarks of Advanced Micro Devices, Inc. VIA is a

registered trademark of VIA Technologies, Inc. Award is a registered

trademark of Award Software, Inc. Other trademarks and registered

trademarks of products appearing in this manual are the properties

of their respective holders.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s

instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide

Quick Setup

Guide

Notice

This user’s manual contains detailed information about the system

board. If, in some cases, some information doesn’t match those

shown in the multilingual manual, the multilingual manual should

always be regarded as the most updated version. The multilingual

manual is included in the system board package.

To view the user’s manual, insert the CD into a CD-ROM drive.The

autorun screen (Main Board Utility CD) will appear. Click “User’s

Manual”.

System Board

This user’s manual is for the AD77 INFINITY and AD77 Pro system

boards.The differences between these boards are shown below.

Three IEEE 1394a connectors

One Serial ATA connector

One RAID IDE connector

RJ45 LAN port

AD77 Pro

AD77 INFINITY

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (German)................................................

Chapter 5

Español (Spanish)..................................................

104

Note:

The user’s manual in the provided CD contains detailed information

about the system board. If, in some cases, some information doesn’t

match those shown in this manual, this manual should always be

regarded as the most updated version.

Quick Setup Guide

Quick Setup

Guide

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1.2 System Memory................................................................................................................

1.3 Jumpers.....................................................................................................................................

1.4 Real Panel I/O Ports................................................................................................

1.5 Award BIOS Setup Utility.......................................................................................

Important:

To ensure proper boot up and operation of your system, you must

power-off the system then turn off the power supply’s switch or

unplug the AC power cord prior to altering the setting of a jumper

or replacing the CPU.

Quick Setup Guide

Quick Setup

Guide

1.1 System Board Layout

AD77 INFINITY

(Supports IEEE 1394a, RAID and Serial ATA)

PS/2 power

select (JP1)

Mouse

COM 1 (J2)

COM 2 (J1)

Parallel (J4)

USB 1

USB 2

USB 3

USB 4

LAN

Line-

out

Line-

Mic-

CN1

Socket A

CPU fan

(J24)

DDR 1

DIMM Standby

Power LED

VIA

KT400

DDR 2 DDR 3

DDR 4

VIA

VT8235CD

ATX p ower

(J18)

Second chassis

fan (J19)

Primary

IDE (J26)

Secondary

IDE (J28)

FDD

(J30)

Marvell

88i8030

Battery

RAID IDE

(J31)

CPU FSB

select (JP4)

Clear

CMOS

(JP3)

1J27

RESET

SPEAKER HD-LED

USB 5/6

(J23)

Game/MIDI (J20)

Wake-On-LAN (J21)

Wake-On-Ring (J22)

JP7

J21 J22

J20

JP6

Winbond

W83697HF

IrDA (J17)

Audio

codec (JP5)

S/PDIF-in/out

(J32)

AC’97

BIOS

AUX-in

(J13)

CD-in

(J12)

Front

audio

(J7)

4CH

audio

(J11)

1394a (J8, J14, J15)

Audio codec (JP6)

CNR setting (JP7)

Chassis

fan (J29)

G-SW G-LED PWR-LED

ATX-SW

HPT371

LED 6

LED 3

PCI Standby

Power LED

VIA

VT6306

SATA

(J25)

Square denotes pin 1

AGP Slot

PCI Slot 1

PCI Slot 2

PCI Slot 3

PCI Slot 4

PCI Slot 5

CNR Slot

J15

J14

CPU FSB select

(JP8)

VIA VT6103

Quick Setup Guide

Quick Setup

Guide

AD77 Pro

PS/2 power

select (JP1)

Mouse

COM 1 (J2)

COM 2 (J1)

Parallel (J4)

USB 1

USB 2

Line-

out

Line-

Mic-

CN1

Socket A

CPU fan

(J24)

DDR 1

DIMM Standby

Power LED

VIA

KT400

DDR 2 DDR 3

DDR 4

VIA

VT8235CD

ATX p ower

(J18)

Second chassis

fan (J19)

Primary

IDE (J26)

Secondary

IDE (J28)

FDD

(J30)

Battery

CPU FSB

select (JP4)

Clear

CMOS

(JP3)

1J27

RESET

SPEAKER HD-LED

USB 5/6

(J23)

Game/MIDI (J20)

Wake-On-LAN (J21)

Wake-On-Ring (J22)

JP7

J21 J22

J20

JP6

Winbond

W83697HF

IrDA (J17)

Audio

codec (JP5)

AC’97

BIOS

AUX-in

(J13)

CD-in

(J12)

Front

audio

(J7)

4CH

audio

(J11)

Audio codec (JP6)

CNR setting (JP7)

Chassis

fan (J29)

G-SW G-LED PWR-LED

ATX-SW

LED 6

LED 3

PCI Standby

Power LED

Square denotes pin 1

AGP Slot

PCI Slot 1

PCI Slot 2

PCI Slot 3

PCI Slot 4

PCI Slot 5

CNR Slot

S/PDIF-in/out

(J32) CPU FSB select

(JP8)

USB 3

USB 4

Note:

The illustrations on the following pages are based on the AD77

INFINITY system board that supports onboard LAN.

Quick Setup Guide

Quick Setup

Guide

Warning:

• To ensure proper boot up and operation of your system, you

must power-off the system then turn off the power supply’s

switch or unplug the AC power cord prior to altering the setting

of a jumper or replacing the CPU.

• Electrostatic discharge (ESD) can damage your system board,

processor, disk drives, add-in boards, and other components.

Perform the upgrade instruction procedures described at an ESD

workstation only. If such a station is not available, you can provide

some ESD protection by wearing an antistatic wrist strap and

attaching it to a metal part of the system chassis. If a wrist

strap is unavailable, establish and maintain contact with the

system chassis throughout any procedures requiring ESD

protection.

1.2 System Memory

The system’s memory speed differs according to the type and

number of DIMM used. Please refer to the table below:

Module 1pc Runs at 2pcs Run at 3pcs Run at 4pcs Run at

DDR 400 400MHz 400MHz 333MHz 266MHz

DDR 333 333MHz 333MHz 333MHz 266MHz

DDR 266 266MHz 266MHz 266MHz 266MHz

Quick Setup Guide

Quick Setup

Guide

1.3 Jumpers

1.3.1 Clear CMOS Data - JP3

Clear CMOS

(JP3)

123

1-2 On:

Normal (default)

123

2-3 On:

Clear CMOS Data

1.3.2 CNR Settings - JP7

CNR setting

(JP7)

123

1-2 On:

Secondary (default)

123

2-3 On:

Primary

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DFI Hauptplatine Handbücher

DFI

DFI PL610-C622 Bedienungsanleitung

DFI

DFI WL171/WL173 Bedienungsanleitung

DFI

DFI K6BV3+/66 Bedienungsanleitung

DFI

DFI PB50-V3 Bedienungsanleitung

DFI

DFI MB630-CRM Bedienungsanleitung

DFI

DFI SD331-C236 Bedienungsanleitung

DFI

DFI CB64-BX Bedienungsanleitung

DFI

DFI CS170-Q370/C246 Bedienungsanleitung

DFI

DFI CM64-AL Bedienungsanleitung

DFI

DFI NS35-TC Bedienungsanleitung

DFI

DFI P5BV3+/e Bedienungsanleitung

DFI

DFI P5XV3 Bedienungsanleitung

DFI

DFI P2XBL/D Bedienungsanleitung

DFI

DFI lanparty UT nF3 250Gb Bedienungsanleitung

DFI

DFI 852GME-MGF Pro Bedienungsanleitung

DFI

DFI AD72-SC Bedienungsanleitung

DFI

DFI ICX610-C621A Bedienungsanleitung

DFI

DFI NB60-EL Bedienungsanleitung

DFI

DFI ADS310-R680E/Q670E Bedienungsanleitung

DFI

DFI Qseven Q7A-551 Bedienungsanleitung

DFI

DFI OT951-D Series Bedienungsanleitung

DFI

DFI PT630-NRM Bedienungsanleitung

DFI

DFI CR101-D Bedienungsanleitung

DFI

DFI G586VPA Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung