Diamond View DV150 Bedienungsanleitung
Diamond View
DV150
LCD Color Monitor
15.1” (38.35cm) LCD Panel Size
User’s Manual
ii
Copyright Notice
Copyright 1999, Mitsubishi Electric Australia Pty. Ltd.
All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language or
computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written
permission.
Disclaimer
Mitsubishi Electric Australia Pty. Ltd. makes no
representations or warranties, either expressed or
implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability
or fitness for any particular purpose. Further,
Mitsubishi Electric Australia reserves the right to
revise this publication and to make changes from time to
time in the contents hereof without obligation to notify
any person of such revision or changes.
Fill in here!!
For future reference, write the followi
n
g
information about your monitor in the space
below. The serial number is on the back of the
product or on the bottom of its stand.
Monitor Information
Product Name: DV 150
Serial Number:
Date of
Purchase:
Dealer Information
Dealer:
Telephone
Number:
Address:
iii
iv
Important Safety Instructions
1. The AC adaptor supplied with the DV150 monitor
isolates it from the AC mains power supply.
2. Unplug the AC adaptor from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners. Use
a soft cloth to clean the monitor housing and a tape
to stick dust and fingerprints on the screen panel.
3. Slots and openings on the back or top of the cabinet
are provided for ventilation. They must not be
blocked or covered. This product should never be
placed near or over a radiator or other heat source,
or in a built-in installation unless proper
ventilation is provided.
4. The DV150 monitor should only be operated with the AC
adaptor model LE-9702B, manufactured by Lien
Electronics. If you are not sure of the type of mains
power available, consult your dealer or local Power
Company.
5. Never push objects of any kind, or spill liquid of
any kind into this product.
6. Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltages or other risks.
7. If any abnormal operation or accident (such as
dropping the unit) occurs, disconnect the monitor
from the wall power outlet and contact qualified
service personnel.
v
Table of Contents
Copyright Notice...................................... ii
Disclaimer............................................ ii
Important Safety Instructions......................... iv
Table of Contents...................................... v
Introduction........................................... 1
Unpacking the Package.............................. 1
Features........................................... 2
Power Management................................... 3
Getting Started........................................ 4
Installing the Monitor............................. 4
Adjusting the Monitor.................................. 5
A Look at the Control Panel........................ 5
Adjusting the Monitor.............................. 5
OSD(On-Screen Display) Operation Procedure..... 6
Contrast hot-key mode...................... 6
Brightness hot-key mode.................... 6
Main menu mode............................. 6
Making Adjustments............................. 7
Control Functions Available in Main Menu....... 7
Auto : automatically adjusts Color Temperature,
Phase, V-Position, H-Position and Pixel Clock
while the screen size is full................. 12
When Your Monitor Must Be Adjusted................ 13
How to Adjust Your Monitor using the Diskette. 13
Supported Timings................................. 14
Troubleshooting................................... 16
Maintenance....................................... 18
Need More Help?................................... 18
Specifications........................................ 19
Contacting Mitsubishi Electric........................ 20
Australia:........................................ 20
1
This chapter helps you check your pack and introduces th
e
advantages of your new LCD Monitor.
Introduction
1
Unpacking the Package
Check following items. If they are missing or damaged,
consult your place of purchase immediately.
9LCD monitor with
attached signal cable
9Power cord & adapter
9User’s manual
9Diskette
Locate the model name and the serial number label on the
back of your monitor or underneath its stand. Write down
the details of your monitor and dealer in the space on
page (ii) of this manual for future reference.
2
Features
Your Diamond View DV150 has the following features:
9Power Saving Function
The power management complies with VESA DPMS
standard. When the system is idle (in monitor off
mode), the monitor automatically cuts its power
consumption to less than 5W.
9Plug’n Play Compatibility
It is compatible with the Plug’n Play features of
Windows®95 and Windows®98.
9Space Saving
Compared with CRT monitors, the depth of your LCD
monitor footprint is only 170mm, reducing the
required desktop space by at least 50%.
9Light Weight
Your monitor weights only 5.8Kg, almost 70% lighter
than traditional 15” CRT monitors.
9Lower Power Consumption
Compared to the maximum 100W power consumption of 17”
CRT monitors, this monitor consumes only 36W in
operation (maximum).
9Intelligent Screen Technology
The On-Screen Display (OSD) allows you to adjust all
settings simply with on-screen menus.
9High Quality Ratiometric Expansion
With any resolution within the monitor’s specified
range, your Diamond View DV150 monitor can expand the
image to full screen.
9True Colour Display
With dithering support, Diamond View DV150 monitor
enhances the visual effect and offers you better
image quality.
9Auto Function
With auto adjustment function, the Auto key can
automatically adjust Color temperature, H-position,
V-position, Pixel clock and Phase for you.
3
Power Management
The monitor’s power management complies with VESA DPMS
standard and can lower the power consumption of the
monitor while it is not in use. To release the monitor
from the power-saving condition, press any key on the
computer’s keyboard. The power consumption at NORMAL
and OFF modes is as follows.
Mode Power
Consumption Horizontal
Sync. Vertical
Sync. Power LED
Normal < 36 W ON ON Green
Off < 5 W OFF OFF Amber
Getting Started
4
2
This chapter helps you install your monitor.
Installing the Monitor
This monitor is equipped with an auto-sensing AC adaptor
power supply for voltages of 100~240V AC, 50~60Hz.
1. Make sure that the
computer system is
turned off.
2. Plug the signal cable
into the signal
connector at the rear of
PC.
3. Plug adapter output
cable to the jack at the
rear of LCD monitor and
the power cord to the
adapter.
4. Connect the power cor
d
to power source.
5. Turn on the computer and
the monitor.
Andere Handbücher für DV150
1
Inhaltsverzeichnis
Andere Diamond View Monitor Handbücher
Diamond View
Diamond View DV151 Bedienungsanleitung
Diamond View
Diamond View DV200B Bedienungsanleitung
Diamond View
Diamond View DV154 Bedienungsanleitung
Diamond View
Diamond View DV158 Bedienungsanleitung
Diamond View
Diamond View 1554R Bedienungsanleitung
Diamond View
Diamond View 2115E Bedienungsanleitung
Diamond View
Diamond View 1770G Bedienungsanleitung
Diamond View
Diamond View DV17NF Bedienungsanleitung
Diamond View
Diamond View DIAMOND VIEW DV159 Bedienungsanleitung
Diamond View
Diamond View DV19NF Bedienungsanleitung
Diamond View
Diamond View DV156 Bedienungsanleitung
Diamond View
Diamond View DIAMOND VIEW DV181 Bedienungsanleitung
Diamond View
Diamond View DV154 Bedienungsanleitung
Diamond View
Diamond View DV152 Bedienungsanleitung
Diamond View
Diamond View DV172 Bedienungsanleitung
Diamond View
Diamond View DV172 Bedienungsanleitung
Diamond View
Diamond View DV155 Bedienungsanleitung
Diamond View
Diamond View DV195 Bedienungsanleitung
Diamond View
Diamond View 1998E Bedienungsanleitung
Diamond View
Diamond View DV190 Bedienungsanleitung
