Diamond RF3G/Q Betriebsanleitung

Mod: RF3G/Q

Production code: GST 19

03/2022

G03407 December 2020

USER AND INSTALLATION MANUAL

GAS STOVES (1 Burner-2 Burners-3 Burners)

Références :

RF1G/Q

RF2G/Q

RF3G/Q

Fabrication française

Made in France

G03407 December 2020

GAS STOVES

Congratulations on the purchase of this upmarket cooking equipment made in

France. You have chosen an appliance that combines the best technical

qualities with great comfort of use. We wish you the greatest satisfaction.

1. SAFETY INSTRUCTIONS

Please follow these instructions carefully to avoid the

risk of fire, burns or other injuries and damage. When

using this unit, basic safety precautions should always

be observed, such as :

- Never leave the appliance running unattended.

- Always keep the operating instructions with the

appliance.

- Always install the appliance in accordance with the

instructions. A minimum distance of 10 cm from the

wall or partition is required.

- Protect the appliance from direct sunlight, frost and

moisture.

- Do not leave the appliance within the reach of

children or infirm persons without supervision.

- Never move the appliance while it is in operation or

when the cooking fires are still hot.

- Ensure that only trained personnel use the appliance.

- Do not touch the hot surfaces of the appliance. The

temperature of hot surfaces can be very high when the

appliance is switched on. Always use the control

knobs.

- Do not use the unit for other functions than the

intended use.

G03407 December 2020

- Do not leave the hose or flexible tube (purchased

separately in a shop) in contact with hot surfaces.

- Do not bend or pinch the horse or flexible tube.

- The appliance must not be used near combustible

materials.

- During use, make sure not to obstruct the air vents

of the appliance.

- Repairs should only be carried out by a qualified

person.

- Use only original spare parts.

- At the end of cooking, in order to clean the

appliance, do not forget to cut off the gas supply.

2. CONTENTS OF PACKING CARTON

Device: a gas stove

Accessories: - A set of natural gas injectors

- A star-shaped support (for small pans)

- The present manual

See exploded views of gas stoves at the end of the document.

Power control knob Piezo

G03407 December 2020

3. CONFORMITY OF USE

Use the device only to cook or keep warm some food.

4. OPERATING MODE

These gas stoves are compact stainless steel appliances with 1, 2 or 3

burners depending on the model.

The control of the cooking zones is independent, with a piezo ignition system

and a safety thermocouple.

They are equipped with several fully removable parts: cast iron grill, burner

crown and stainless steel tray.

To turn on your stove, simply push and turn the tap knob (n°1 in the photo) to

the left to the large flame position and press the piezo knob (n°2 in the photo).

Hold the knob for 15 seconds so that the burner remains lit.

During cooking, the temperature can be regulated with the control knob (n°1 in

the photo) from high flame to low flame (to avoid the phenomenon of

overcooking).

A safety thermocouple cuts off the gas supply if the burner goes out. The

reduced flow rate of the appliance is preset at the factory. It must not be

changed.

5. OPERATION / HANDLING

a) Installation/Assembly:

- Carefully unpack the machine from its carton.

- Place the appliance on a flat, heat-resistant surface in a well-ventilated room.

- Never place the machine near a wall or partition made of combustible

materials, even if it is very well insulated.

- A distance of at least 10 cm from the wall or partition is required.

- Remove the white protective film around the machine.

b) First use:

For the first use, heat your stove outside in order to evacuate the residual oil

fumes from the metal parts. This may give off a slight odour for a few moments.

First cleaning

Clean the device before the first use. (See 6 Cleaning)

G03407 December 2020

Gas connection

The appliances operate on the following gases : Butane G30, Propane G31,

Natural Gas G20/G25. The appliances are supplied as standard with a

butane/propane injector corresponding to category II2E+3+. The connection is

made with a 1/2 thread.

The heat output of the appliance is:

- GST 7 / 145847 / PGAZ7 7 kW

- GST 12 / 145853 / PGAZ12 12 kW

- GST 14 / PGZA14 14 kW

- GST 19 / PGAZ19 / 27036R 19 kW

- GST 21 / PGAZ21 / 27066 21 kW

For use in Natural Gas, change the injectors of the burners (delivered in a plastic

bag in the packing). Screw in the 19 mm venturi screw.

Connect the appliance to the gas supply pipe by interposing a shut-off valve to

isolate the appliance from the rest of the installation.

Check the supply pressure, when all the burners are lit, using a pressure gauge.

It must be equal to the indications on the nameplate.

The fresh air flow rate required for the combustion air supply is:

- GST 7 / 145847 / PGAZ7 4 m3/h

- GST 12 / 145853 / PGAZ12 24 m3/h

- GST 14 / PGZA14 28 m3/h

- GST 19 / PGAZ19 / 27036R 38 m3/h

- GST 21 / PGAZ21 / 27066 42 m3/h

General conditions of installation

The installation and maintenance of the appliance must be carried out in

accordance with the regulations and rules in force, in particular:

General specifications

For all appliances:

Article GZ Installation with combustible gases and liquefied hydrocarbons.

Then, according to use:

Article CH Heating, ventilation, refrigeration

Air conditioning and domestic hot water steam generation.

G03407 December 2020

Article GC Installation of appliances to be used for catering

Specific requirements for each type of establishment receiving the public.

(hospitals, shops, etc…)

Important: Never change the diameter of the injectors.

Gas category table, according to the country of destination of the

appliance.

Country of

destination

Category

Gas

Pressure

Diameter of

injector

(burner 5 kW)

Diameter of

injector

(burner 7 kW)

FR/BE

II2E+3+

G20/G25

G30/G31

20/25

28-30/37

160

110

195

130

LU/DE

I2E

G20

160

195

AT/CH/CY/DK/

EE/FI/HR/LT/L

V/RO/SE/SI/SK/

II2H3B/P

G20

G30/G31

160

110

195

130

II2E3P

G20

G31

160

110

195

130

HR/HO

II2H3P

G20

G31

160

110

195

130

CH/CY/CZ/ES/

GB/GR/IE/IT/PT

/SI/SK/TR

II2H3+

G20

G30/G31

28-30/37

160

110

195

130

NL/NO/HU

I3B/P

G30/G31

110

130

Air adjustment

The injectors have been designed to avoid any air adjustment whatever the type

of gas used.

c) How to use the machine:

Elements of command and display

Operation/Display

Features

Power control knob

(n°1 on picture)

On/off

Set the power (low flame = low power, high flame = high power)

Piezo (n°2 on picture)

Switch on the machine

G03407 December 2020

Precautions of use

Burner 5kw

Diameter of pans

to be used

Maxi

Mini

34cm

22cm

Burner 7kw

Diameter of pans to

be used

Maxi

Mini

42cm

22cm

Ignition

1. Push and turn the tap knob (n°1 in the photo) to the left to the large flame

position.

2. Push the piezo button (n°2 in the photo).

3. Keep the button pressed for 15 seconds so that the burner remains lit.

4. The burner will then remain lit and it is now possible to regulate the power

by turning the gas knob.

Temperature setting

Once the burner is lit, set the appliance to the desired power by turning the

control knob (n°1 in the photo).

It is not necessary to leave the appliance on at full power. The

temperature must be adapted to the products to be cooked in order to

limit gas consumption.

Stopping the appliance

- Set each control knob (n°1 on the picture) to 0: the device is completely

switched off.

- Turn off the gas supply.

- Let the machine to cool down.

- Clean the appliance. (see 6. Cleaning)

d) Breakdown / repair:

In the event of a breakdown or damaged part, please call your after-sales

service and entrust all technical operations to a qualified person.

G03407 December 2020

When you contact the service department of your Distributor or shop, give them

the complete reference number of your appliance (commercial designation, type

and serial number). This information can be found on the nameplate visible on

the back of the appliance.

6. CLEANING AND MAINTENANCE

Turn off the gas supply.

- Let the machine to completely cool down before any technical or cleaning work.

- Regularly clean the external walls of your appliance with hot water and

washing-up liquid: avoid abrasive sponges. Rinse your appliance with a damp

sponge.

- Never clean your appliance under a water jet, as infiltrations could damage it

irreparably.

- If not used for a long period of time, we strongly recommend you to keep the

appliance away from moisture.

7. TECHNICAL SPECIFICATIONS

Models

Outside

dimensions

Power

Nb of burners

Weight

GST 7/145847/PGAZ7

370x510x195 mm

7 kW

1 fire 7 kW

12 Kg

GST 12/145853/PGAZ12

690x510x195 mm

12 kW

2 (1 fire 7 kW+1 fire 5 kW)

22 Kg

GST 14/PGAZ14

690x510x195 mm

14 kW

2 (2 fires 7 kW)

22 Kg

GST 19PGAZ19/27036R

1005x510x195 mm

19 kW

3 (2 fires 7 kW+1 fire 5 kW)

32 Kg

GST 21/PGAZ21/27066

1005x510x195 mm

21 kW

3 (3 fires 7 kW)

32 Kg

8. WARRANTY

Conditions of guarantee

The warranty that applies to any appliance is the commercial warranty of the

distributor or retailer. Please contact the shop where you purchased your

appliance for the exact terms and conditions.

The warranty does not entitle you to any claims for damages.

G03407 December 2020

The following provisions are not exclusive of the benefit of the legal guarantee

provided by articles 1641 and following of the Civil Code relating to defects and

hidden defects.

Exclusion clauses of the warranty

Poor installation and maintenance, especially if they do not comply with

the regulations in force or the instructions in this user manual.

The warranty does not cover repairs required as a result of incorrect operation,

improper use, negligence or overloading of the appliance, as well as those

resulting from faulty installations.

Damage due to shocks or bad weather is not covered by the warranty. The

equipment travels at the user's risk; in the case of delivery by carrier, the

recipient must express reservations to the carrier upon delivery of the appliance.

The guarantee ends in the event of intervention, repair, modification by

unqualified persons, or use for inappropriate purposes.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Diamond Herd Handbücher

Diamond

Diamond GAR 7 Bedienungsanleitung

Diamond

Diamond E9/PLA8 Bedienungsanleitung

Diamond

Diamond G9/6BA12 Bedienungsanleitung

Diamond

Diamond G99/M150D2-N Bedienungsanleitung

Diamond

Diamond E17/4PQF8-N Bedienungsanleitung

Diamond

Diamond E99/4PQA2-N Bedienungsanleitung

Diamond

Diamond G77/6BFM11-S Bedienungsanleitung

Diamond

Diamond G2SA77/9 Bedienungsanleitung

Diamond

Diamond E7/PM7T Bedienungsanleitung

Diamond

Diamond E9/4SPF8 Bedienungsanleitung

Diamond

Diamond E9/6PQFA12 Bedienungsanleitung

Diamond

Diamond G1/4BF2 Bedienungsanleitung

Diamond

Diamond G99/4BA2-N Bedienungsanleitung

Diamond

Diamond E77/PM7T-N Bedienungsanleitung

Diamond

Diamond G2 Series Bedienungsanleitung

Diamond

Diamond RECH/1G-N Bedienungsanleitung

Diamond

Diamond E9/4PQF8 Bedienungsanleitung

Diamond

Diamond G9/2BA4 Bedienungsanleitung

Diamond

Diamond G9/4BA8-N Bedienungsanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

Parmco

Parmco FS 600 Bedienungsanleitung

MCZ

MCZ SUITE AIR 10 M2 Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung