Do not charge your keyboard for longer than two
hours at a time, as this will lead to a reduction of
battery capacity and void your manufacturer's
warranty.
Unplug the D100 from the charging cable and the
cable itself from the power source when not in use.
If left unused, a fully charged battery will lose its
charge over time. We recommend fully charging
the D100 twice a month to ensure sufficient
battery life.
Do not leave the keyboard exposed to extreme
heat or cold as this will reduce the capacity and
lifespan of the battery.
Do not place the keyboard close to fire as the
batteries may explode. Batteries may also explode
if damaged.
Make sure the keyboard is completely dry before
charging.
IMPORTANT SAFETY INFORMATION
Never attempt to disassemble or modify your
keyboard for any reason. Doing so may cause the
keyboard to malfunction or become combustible.
Damaging the keyboard will void your manufactur-
er’s warranty.
Do not use excessive force when operating the
keyboard. Do not let the keyboard drop onto a hard
surface. Do not put heavy objects on your folded or
unfolded keyboard. Keep the keyboard away from
sharp objects. Please do not spill any liquids on the
keyboard Clean with soft moist cloth.
Avoid exposing the keyboard to extreme
temperatures (below 32F/2Co or above
104F/40Co). Extreme temperatures may cause the
protective cover to warp or become deformed, and
potentially reduce your D100’s lifespan.
Avoid shining the LED lights in the eyes of humans
and animals. Do not use the keyboard outdoors
during a thunderstorm. Thunderstorms may cause
malfunction and increase the risk of electric shock.
TROUBLESHOOTING INSTRUCTIONS
This can happen when the battery has lost charge.
Charge the D100 for at least 30 minutes and the
problem should be solved.
CAN'T CONNECT THE KEYBOARD TO YOUR DEVICE
1. Turn off the D100.
2. Go to the Pairing menu on your source device
and delete all saved devices from the list by
clicking on “Forget this device”.
3. Turn the Pairing Mode on your source device
OFF then back ON; DICTOPRO D100 will be
deleted.
4. Power OFF your source device; turn it back on.
5. Power ON the D100.
6. Enter the device into the pairing mode and
follow the instruction for connecting.
MY DEVICE IS ASKING FOR A PASSWORD
If prompted for a password, enter 0000 on your
device.
FREQUENT DISCONNECTION
1. Ensure the D100 is fully charged.
2. Ensure that the distance between your device
and the keyboard is less than 30 feet / 10
meters.
THE LED DOES NOT COME ON WHEN TURNING THE
KEYBOARD ON
