Digi-Wave DLT 100 Bedienungsanleitung
index
Safety Information 4
System Overview 5
DLT 100 6-27
Button Functions 7-8
Battery Charging 9
2-Way Mode 10-17
Simultaneous Interpretation Mode 18-25
Repeater Mode 26-27
DLR 50 28-31
Specications 33-34
DLT100Specications 32-33
DLR50Specications 34
Troubleshooting 35
FAQ’s 36
FCC Statements 37
HEARING SAFETY
CAUTION!
This product is designed to amplify sounds to a high volume level which
could potentially cause hearing damage if used improperly. To protect your
hearing and the hearing of others:
1. Turn the volume down before putting on the earphone or headphone,
and then adjust the volume to a comfortable level.
2. Set the volume level at the minimum setting that you need to hear.
3. If you experience feedback (a squealing or howling sound), reduce the
volume setting and move the microphone away from the earphone or
headphone.
4. Do not allow children or other unauthorized persons to have access to
this product.
BATTERY SAFETY
CAUTION!
DLR 50 may be supplied with alkaline batteries. Do not attempt to recharge
alkaline batteries, which may explode, release dangerous chemicals, cause
burns, or other serious harm to the user or product. Rechargeable batteries
may be used with DLR 50 with external battery charger.
MEDICAL DEVICE SAFETY
CAUTION!
1. Before using this product with an implantable or other medical device,
consult your physician or the manufacturer of your implantable or other
medical device.
2. If you have a pacemaker or other medical device, make sure that you
are using this product in accordance with safety guidelines established
by your physician or the implantable device manufacturer.
RECYCLING INSTRUCTIONS
Battery Safety and Disposal
Help Williams Sound protect the environment! Please take time to dispose
of your equipment properly. Please do NOT dispose of batteries in the
household trash. Please take the batteries to a retail or community collec-
tion point for recycling.
Product Recycling:
Please do NOT dispose of your Williams Sound equipment in the household
trash. Please take the equipment to an electronics recycling center or return
the product to the factory for proper disposal.
safety information
4
system overview
The new Digi-Wave™ (digital spread spectrum – DSS) is a simultaneous, two-way wireless listening system in the 2.4 GHz band. Slim, lightweight, simple to set
up and use. With the push of a button, users can access 2-way communication for easy group leader/group member participation.
· Portable DLT-100 transceivers for 1- or 2-way operation
· DLR-50 receivers for 1-way listening applications
· Patented, frequency-hopping technology minimizes interference from other devices
· Global, turn-key solution: 2.4 GHz operation harmonized for use in most countries; FCC, CE, Industrie Canada and C-Tick approved
· Range: Up to 100 ft outdoors and up to 200 ft* indoors ( line of sight )
* Depending on environmental conditions
2-way
· 4-simultaneous groups available in 2-way operation
· Full duplex operation
· Built-in microphone and speaker (DLT-100)
· Assigned speaker priority as follows:
1
st priority — Chairman Master ( CM )
2
nd priority — Chairman Slave ( CS )
3
rd priority — Slave ( SLV )
· Applications include Tour Guide, Team Teach, Wireless Intercomm,
portable discussion and personal listening systems
simultaneous interpretation
·Canaccommodateoor(orcommon)language,plusupto
14 simultaneous languages
· DLT 100 has repeater function for increased range in interpretation mode
5
DLT 100
6
DLT 100
button functions
POWER / MENU BUTTON
° Press and hold for power on/Off
° Press once to change mode when in setup mode
VOTING / SETTING BUTTON
° Press No -Yes button together to enter or exit setup mode
° Use [YES],[NO], or [ABS] in voting mode
° Use these buttons to select channels in simultaneous interpretation mode
° Press and hold [ABS] button to enter voting mode. Master unit controls voting function. All
votes viewable only on Master and Sub Master unit. Must have address assigned between
1 — 99 to allow voting or attendance function
VOLUME CONTROL / SELECT BUTTON
° Controlvolume
° Use to navigate selection in setup mode.
TALK BUTTON
° Press button once to activate the microphone. Press button once more to turn off
the microphone
° Press and hold the button for approximately 2 seconds to mute other DLT 100 slave units.
Only the CM has this function.
7
1 Talk Button
2 LED
3 LCD display
4 Internal Speaker
5 External Mic. Jack (3.5mm)
6 External Headphone Jack (3.5mm)
7 Internal microphone
8 iPod Connector (30pin)
Power / Menu Volume / Select Down Volume / Select Up
button functions
8
DLT 100
battery charging
BATTERY CHARGING
1. This Product uses rechargeable lithium
polymer battery
2. Use 30 Pin connector, located on the bottom of DLT 100 to charge the
battery. Full charging time: approx. 5 hours
RedLEDasheswhilecharging.
Green LED on solid when battery is charged.
3. Battery Maintenance
° Charge the battery at room temperature
° Not recommended to charge the battery more than 12 hours continuously
( Optional CHG 102 - 2-bay charger available )
9
2-way mode
DLT chairman master (CM) DLT chairman slave (CS) DLT’s slave (SLV)
CM works as a master device
to control everyone in a group. Guide
has 1st priority to speak all the time and
controls operation of other features
Assists CM in a group. Has 2nd
priority to speak
2-way communication with all DLT’s in
group. Have 3rd priority.
steps
roles
display
1. Tour guide / conference
3. Address setting
Press No - Yes buttons together for 2 Sec to enter setup menu. Then set to 2-way mode . Press + or – button to select.
2. Master Chairman / Slave
Chairman / Slave setting
Press menu button once, then press + or – button to set select Master Chairman / Slave Chairman / Slave
Press menu button once, then press + or – button to select between 0-1023. Every DLT must have its own address.
4. Group setting Press menu button once, then press + or – button to select between 0-1023. ( Default is 12 )
5. Time setting (CM only)
6. Speaking time setting
7. Save and exit setup mode
Press menu button once, then press
+ or – button to set current time
Press menu button once, then press
+ or – button to set speaking time
between 0 - 60 min. ( Default is 0 min )
When setup is complete, press No - Yes buttons together to save and exit
10
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
