Digicom VEGA 7D1476 Bedienungsanleitung

VEGA WIRELESS CAMERA

User’s Manual

7D1476 rev. 0.46 06/2006

TABLE OF CONTENTS

PREFACE............................................................................................................................4

INSTALLATION PRECAUTIONS ........................................................................................5

WARNING INSTRUCTIONS................................................................................................6

1. INTRODUCTION .............................................................................................................7

1.1 PACKAGE CONTENTS .............................................................................................7

1.2 TEC NICAL FEATURES...........................................................................................8

1.3 APPLICATIONS .......................................................................................................10

1.4 APPLICATION SCENARIOS ...................................................................................10

1.5 ALARM DETECTION ...............................................................................................14

2. INSTALLATION .............................................................................................................15

2.1 FRONT PANEL ........................................................................................................15

2.2 REAR PANEL...........................................................................................................15

2.3a LED DESCRIPTION (VEGA WIRELESS CAMERA WLAN) ..................................16

2.3b LED DESCRIPTION (VEGA WIRELESS CAMERA GPRS)..................................16

2.4 CLAMP STRIP .........................................................................................................17

2.5 SIM CARD (only for the VEGA WIRELESS CAMERA GPRS).................................19

2.6 INSTALLING T E EXTERNAL ANTENNA ..............................................................20

2.7 POWER SUPPLY.....................................................................................................20

2.8 RESET BUTTON......................................................................................................20

2.9 FACTORY SETTINGS .............................................................................................21

2.10 CAMERA STAND...................................................................................................21

3. CONFIGURATION.........................................................................................................22

3.1 PC CONFIGURATION .............................................................................................22

3.2 VEGA WIRELESS CAMERA CONFIGURATION.....................................................23

3.3 CONFIGURATION MENU........................................................................................24

4. F.A.Q. (FREQUENTLY ASKED QUESTIONS) AND TROUBLES OOTING ................45

PREFACE

Dear Customer, congratulations on purchasing a Digicom product

and many thanks for your confidence!

We advise a careful reading of the whole manual, in order to get

an in-depth knowledge of our products’ features and learn how to

use it best.

Any critical comment is most welcomed as a reason for

professional growth and precious contribution to the development

of products and services aiming at customer’s best satisfaction.

Due to constant technological innovation, Digicom reserves the right to modify any technical and esthetical

feature of the products without notice.

This publication is thereof subject to change without notice.

The contents of this publication may not be reproduced in whole or in part, transcribed, stored, translated, or

transmitted in any form or any means, without the prior written consent of Digicom S.p.A.

Published by Digicom S.p.A.

All trademarks, products and rights reserved.

Digicom S.p.A.

INSTALLATION PRECAUTIONS

In order to guarantee your safety and a correct device functioning, be sure to follow these safety warnings.

The whole set (with cables included) must be installed in a place lacking of or distant from:

• Dust, humidity, high temperatures and direct exposure to sunlight.

• eat irradiating objects, which may damage your device or cause any other problem.

• Objects producing a high electromagnetic field ( i-Fi speakers, etc.)

• Corrosive liquids or chemical substances.

ENVIRONMENTAL CONDITIONS

Environment temperat re Relative h midity

from 0°C to +40°C from 20 to 80% n.c.

Any sudden change in temperature and humidity must be avoided.

CLEANING INFORMATION

Use a soft dry cloth and avoid any solvents or abrasive materials.

SHOCKS OR VIBRATIONS

Caution against shocks or vibrations.

WARNING: This is a Class A device

This device may cause radio interferences in a residential environment. In such a cause the end user may

be invited to take appropriate measures.

DECLARATION OF CONFORMITY

We, Digicom S.p.A. via Volta 39 - 21010 Cardano al Campo (Varese - Italy), declare under our sole

responsibility that the following product:

- Vega Wireless Camera WLAN

complies with the following directive:

1999/5/CE R&TTE Directive dated 9 March 1999 (on radio equipment and telecommunications terminal

equipment and the mutual recognition of their conformity), as having been designed in conformity with the

requirements of following Reference Standards:

EN 60950-1 EN 301 489-1 EN 300 328 EN 301 489-17 EN 55022 EN 55024

- Vega Wireless Camera GPRS

complies with the following directive:

1999/5/CE R&TTE Directive dated 9 March 1999 (on radio equipment and telecommunications terminal

equipment and the mutual recognition of their conformity), as having been designed in conformity with the

requirements of following Reference Standards:

EN 60950-1 EN 301 489-1 EN 301 489-7 EN 55022 EN 55024

BACKUP BATTERY

WARNING: this device is s pplied with a Nickel Metal Hydride back p battery.

This battery may get burnt, explode or cause serious burnings. DO NOT disassemble, weld, burn or throw

the battery into water. Keep out of children. Replace only with a same model battery and reserve the

operation only to qualified staff. The use of a different battery may cause fire hazard or explosions. Italian

laws consider batteries as dangerous urban waste that must be disposed according to the law provisions in

force (Italian DPR 915/82 and local provisions).

The backup battery is excluded from warranty.

WARNING INSTRUCTIONS

SAFETY WARNINGS

Read these instructions and norms carefully before powering the Vega Wireless Camera. Violation of such

norms may be illegal and cause hazard situations.

For any of the described situations please refer to the specific instructions and norms.

The Vega Wireless Camera is a low power radio transmitter and receiver. When it is ON, it sends and

receives radio frequency (RF) signals.

The Vega Wireless Camera produces magnetic fields. Do not place it next to magnetic supports such as

floppy disks, tapes, etc.

Operating your Vega Wireless Camera close to other electrical and electronic equipment - such as a

television, phone, radio or a personal computer - may cause interferences.

INTERFERENCES

The Vega Wireless Camera, like all other wireless devices, is subject to interferences that may

reduce its performances.

ROAD SAFETY

Do not use your Vega Wireless Camera while driving. In case of use on cars, you must check that

the electronic equipment is shielded against RF signals. Do not place the Vega Wireless Camera in

the air bag deployment area.

AIRCRAFT SAFETY

Switch off your Vega Wireless Camera when on board aircrafts by disconnecting the power supply

and deactivating the internal backup battery. Using GSM devices on aircrafts is illegal.

HOSPITAL SAFETY

Do not use the Vega Wireless Camera near health equipment, especially pacemakers and hearing

aids, in order to avoid potential interferences. Take care when utilizing the Vega Wireless Camera

inside hospitals and medical centres, which make use of equipment that could be sensitive to

external RF signals. Switch it off when use is expressly forbidden.

EXPLOSIVE MATERIALS

Do not use the Vega Wireless Camera in refuelling points, near fuel or chemicals. Do not use the

Vega Wireless Camera where blasting is in progress. Observe restrictions and follow any specific

regulation or instruction.

INSTRUCTIONS FOR USE

Do not use the Vega Wireless Camera in direct contact with the human body and do not touch the

antenna if not strictly necessary.

Use approved accessories only. Consult documentation regarding any possible device connected

to the Vega Wireless Camera. Do not connect incompatible products.

DISPOSAL OF OBSOLETE EQUIPMENT

The disposal of all obsolete electrical and electronic equipment must be performed separately from

the municipal separate waste collection, by means of specific collection units designated by the

government or by local authorities. When the product is marked by the symbol of a crossed-out

wheeled bin, the device is covered by the European Directive 2002/96/EC (WEEE).

The norms provide for sanctions in case of illegal waste disposal of these products.

1. INTRODUCTION

The Vega Wireless Camera is Digicom’s new camera, equipped with two high

quality CMOS sensors, in order to ensure the best image capture under any light

conditions. The Color sensor can be used for daylight shots, while the

Black&White sensor is especially indicated for night shots with poor light. The

built-in infrared LEDs help getting better quality images in poor light

environments.

The Vega Wireless Camera utilizes the JPEG image compression technology

providing high quality and small size images.

The display of the images filmed with the camera can be performed via any

device - computer, Macintosh, PDA or advanced mobile phone - provided with a

web browser (e.g. Internet Explorer, Firefox, Safari, Opera).

The Vega Wireless Camera’s integrated CPU is able to perform a variety of tasks

automatically:

• Automatic Color / Black&White switching function with changing light conditions;

• Alarm detection on 2 digital inputs;

• Flash-saving of images preceding and following the alarm;

• Internet connection via GPRS (Vega Wireless Camera GPRS model);

• SMS forwarding in case of intrusion detection, power lack and re-establishment (Vega Wireless Camera

GPRS model).

The two products described in this manual are:

- Vega Wireless Camera WLAN

- Vega Wireless Camera GPRS

The two models differentiate for the wireless communication module they use. The WLAN version uses a

LAN wireless communication module which is compatible with the 802.11g protocol (54Mbit/s) and the

802.11b protocol (11Mbit/s). The GPRS version uses a GSM/GPRS module. In the different sections of this

manual you can find a description of the different features for the two versions.

1.1 PACKAGE CONTENTS

• 1 Vega Wireless Camera (GPRS or WLAN model)

• 1 Antenna (GPRS or WLAN model)

• 1 Power Adapter (INPUT: 230 Vac– OUTPUT 12 Vdc 1000 mA)

• 1 LAN Cable (UTP Cat 5)

• 1 Camera Stand

• 1 User’s Manual

1.2 TECHNICAL FEATURES

CAMERA

• Double sensor: Color / Black&White

• Day/night automatic detection

• Infrared LEDs for night vision (up to 5 metres)

• CMOS Sensors 1/4”

• Viewing angle: 70°

• Focal length: 3,8 mm

• F: 2,0

• Focus extension: 10mm – ∞

• Sensitiveness: Color = 1,12 V/Lux-sec

Black/White = 3,0 V/Lux-sec

IMAGE

• JPEG compression

• Resolution: 640x480 pixel (VGA) and 320x240 (QVGA)

• Frame rate: 10 fps

• Pre and post-alarm image saving

HARDWARE INTERFACE

• 2-pin Micro-FitTM power connector

• 1-port 10/100 Ethernet

• Integrated GPRS dual-band GSM modem, Class 10 (Vega Wireless Camera GPRS model)

• Integrated WLAN unit, 54Mbit/s – 802.11g/802.11b (Vega Wireless Camera WLAN model)

• WEP encryption (Vega Wireless Camera WLAN model)

• 2 digital inputs

• 2 power outputs for external sensors (PIR): 9 Vdc and 12 Vdc

• 3 status LEDs

• SMA/f antenna connector (Vega Wireless Camera GPRS model)

• SMArp/f antenna connector (Vega Wireless Camera WLAN model)

• Reset button for factory default settings

• SIM slot (Vega Wireless Camera GPRS model)

WLAN (VEGA WIRELESS CAMERA WLAN model)

• IEEE 802.11g and IEEE 802.11b standards

• Operating speed: from 54 to 1 Mbit/s

• Automatic or manual speed selection

• WEP 128-bit encryption

• Radio frequency 2.400 – 2.483 G z, 13 channels

• Channel spacing: 5 M z

• 802.11g OFDM (Orthogonal Frequency Division Multiplexing)

• 802.11b DSSS (Direct Sequence Spread Spectrum)

• Wi-Fi Interoperable

• Removable antenna – gain 2 dBi

GSM (VEGA WIRELESS CAMERA GPRS model)

• Dual-band 900 / 1800 M z

• Class 4 (2W) – 900 M z

• Class 1 (1W) – 1800 M z

• ETSI GSM Phase 2+ compatible

• GPRS classe 10

• SMS support

POWER SUPPLY

• 12 Vdc – 1000 mA

• Internal rechargeable Nickel Metal ydride battery

OPERATING ENVIRONMENT

• Operating temperature: from 0°C to +40°C

• Storage temperature: from –20°C to +70°C

OVERALL DIMENSIONS

• External dimensions: 127 x 77 x 48 mm

• Weight: about 300 gr

1.3 APPLICATIONS

The Vega Wireless Camera can be used in a wide range of applications. With the built-in CPU, it can work

as a standalone system that provides a web-based solution transmitting high quality video images for

monitoring purposes. It can be managed remotely, accessed and controlled from any PC desktop over the

Intranet or Internet via a web browser. With the easy installation procedure, real-time live images will be

available. In addition, once the Vega Wireless Camera is installed coupled with any application software for

the camera management (such as Active WebCam), you can further expand the scope of the camera.

The typical applications for the Vega Wireless Camera are:

• Monitoring of local and remote places and objects such as construction sites, hospitals, amusement

parks, schools and day-care centers.

• Capture single frame images for alarm detection.

1.4 APPLICATION SCENARIOS

1.4.1 STANDALONE VEGA WIRELESS CAMERA GPRS

In this scenario, the Vega Wireless Camera GPRS captures and saves the images to an internal volatile

memory: when the memory limit is reached, older images are overwritten by the most recent ones.

A presence detector, the Sensor, is connected to one of the Vega Wireless Camera’s GPRS digital inputs.

When an alarm is detected, the images preceding and following the alarm event are saved to the camera

flash memory (non volatile memory). At this point the Vega Wireless Camera GPRS activates an Internet

connection by using the GPRS network and sends a SMS to the users who were added during the

configuration process to alert them on the intrusion.

The images saved by the camera can be accessed by a remote station via any device provided with a web

browser (e.g. Internet Explorer, Firefox, Safari, Opera): a computer, Macintosh, PDA or advanced mobile

phone connected to the Internet.

Internet

GPRS / SMS

emot

station

Vega Wireless

Camera GPRS

Sensor

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digicom Sicherheitskamera Handbücher

Digicom

Digicom IP Camera 300W Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung