Digiever DS-8209-RM Pro Bedienungsanleitung

Network Video Recorder

Quick Installation Guide

DS-8200-RM Pro Series

DS-8209/8212/8216/8220/8225/8232-RM Pro

Quality Service Group

July , 2013

Information in this document is subject to change without notice.

Quick Installation Guide

Thank you for choosing DIGISTOR Network Video Recorder. The following

quick guide will lead you to complete the installation and configuration of the

NVR. Please read the following description carefully.

Pre-installation Notice

Please make sure the following items are prepared for installing DIGOSTOR

DS-8200-RM Pro Series.

Network connection

Configuration of network cameras

Compatibility of network cameras

Computer for configuring DIGISTOR

1-8 hard disks

Compatibility of hard disk with DIGISTOR

1 slotted screwdriver and 1 Philips screwdriver

*For camera compatibility, please check our website

http://www.digiever.com/support/compatibility.php

System Requirements

The following are minimum system requirements for a personal computer to

operate the DIGISTOR in better performance:

Operating System

Microsoft® Windows® XP (32-bit)/ Vista/ 7(32 and 64-bit)

Browser

Microsoft® Internet Explorer 7.0 or above (32-bit)

CPU

For channels under 16 : Intel® Dual core CPU 3.0 GHz or above

For channels over 16: Intel® i5/i7 CPU 3.3 GHz or above

Network

Minimum 10/100 Ethernet (Gigabit Ethernet is recommended)

Note: * User is suggested to connect cameras and NVR with Gigabit

switch.

Memory

For channels under 16 : DDR3 4G or above

For channels over 16: IDDR3 8G or above

Graphics Adapter

AGP or PCI-Express, minimum 1024×768, 16 bit colors, 1G memory or

above

Note: It is highly recommended to use a graphics adaptor which

provides higher than resolutions 1024 x 768 in order to experience the full

benefits of the software.

Make sure the display DPI setting is set to default at 96DPI

To set DPI value, right-click on desktop, choose “Settings” tab >>

“Advanced”>> “General.”

CD-ROM Drive

It is necessary to read the operating instructions in the provided CD-ROM.

Adobe Reader

It is necessary to read the operating instructions in the provided CD-ROM.

The audio function will not work if a sound card is not installed in the PC.

Audio may be interrupted depending on network traffic.

Package Contents

NVR Network Video Recorder

Power Cord

Ethernet Cable

Screw Bag

Product CD

Hardware Description

Front View Rear View

1. LED indicators: LAN1, LAN2, eSATA, HDD1, HDD2, HDD3, HDD4,

HDD5, HDD6, HDD7, HDD8

2. Power button

3. USB BACKUP button - Auto video backup

4. USB 3.0 x 1 (Support auto video backup)

5. HDD1

6. HDD2

7. HDD3

8. HDD4

9. HDD5

10. HDD6

11. HDD7

12. HDD8

13. Gigabit LAN x 2

14. USB 2.0 x 4

15. eSATA x 2 (reserved)

16. VGA output

17. HDMI output

18. DI/DO (4 in 2 out)

Right to left: Vcc5V, GND, DI-1, DI-2, DI-3, DI-4, DO1, DO2

19. Reset button

20. Power connector

Hard Disk Installation

Please follow the steps as illustrated below to install the hardware:

Take out the disk tray from NVR.

Connect the Ethernet cable to the

port of Giga LAN.

Install the hard disk in each tray

and lock the disk with four screws.

Ensure the disk holes match the

holes at the base of disk tray.

Connect the power cord to power

connector.

Insert the disk tray into NVR and

push it to the end.

Turn on the server and there is a

beep to indicate the NVR is in

booting process. Please wait for

minutes until NVR beeps another

time. The installation of NVR is

complete right now.

Connection to DIGISTOR NVR

Please insert the product CD-ROM on a PC to install EZ Search and S-NVR

Decoder. Finally, you can start Quick Configuration on a web page.

Install EZ Search for finding NVR in the network.

Install S-NVR Decoder.

Connect to the configured NVR and install the ActiveX control.

Install EZ Search

Please execute the product CD and click “Install EZ Search.”

Follow the instructions to install and the EZ Search will run automatically.

Install S-NVR Decoder

Click “Install S-NVR Decoder”and follow the instructions to setup.

Connect to NVR

1. Connect to DIGISTOR

After setting the EZ Search and S-NVR Decoder, the user can connect to

the monitoring page by the following two options:

1) EZ Search

Once you click “Connect”or double click the selected NVR list, the IE

browser will pop up automatically.

2) IE browser

Note: There are 2 methods to set network:

Obtain an IP address automatically (NVR Default)

Obtain an available dynamic IP address assigned by a DHCP server. If

this option is selected, DIGISTOR will automatically obtain an available

dynamic IP address from the DHCP server once it connects to the

network.

Specify an IP address

If there is no DHCP server existing in network environments, the static IP

address will be given as 192.168.1.245. It should be adaptable in most

networking environment, and user can choose to maintain the default IP

address or change it in this page. However, it’s recommended setting

different IP address of DIGISTOR if there is more than one DIGISTOR in

the same LAN.

2. Enter a user name and password

password: admin).

3. Install the ActiveX control in order to successfully view the interface of

NVR from IE browser

Quick configuration

After you install the ActiveX control, the system will direct you to set Quick

Configuration in 5 steps. Follow the instructions of the Overview of wizard to

complete the system setup.

Once the five steps of Quick Configuration are complete, you can click “Start

Liveview” to start monitoring.

For further details of Quick Configuration, please refer to the user manual.

When the live view is displayed, you have successfully installed the DIGISTOR

NVR. Congratulations!

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digiever Netzwerk-Hardware Handbücher

Digiever

Digiever DS-2000 Series Bedienungsanleitung

Digiever

Digiever DS-16300-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-8200-SRM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-16400-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-16500-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-4200-RM Pro Series Bedienungsanleitung

Digiever

Digiever DS-8300-SRM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-4100-RM Bedienungsanleitung

Digiever

Digiever DS-8400-SRM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-8300-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-8400-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-2009 Series Bedienungsanleitung

Digiever

Digiever DS-8200-RM Pro Series Bedienungsanleitung

Digiever

Digiever DS-4100 UHD Series Bedienungsanleitung

Digiever

Digiever DS-2100 UHD Series Bedienungsanleitung

Digiever

Digiever DS-1200 Series Bedienungsanleitung

Digiever

Digiever DS-4300-RM Pro+ Series Bedienungsanleitung

Digiever

Digiever DS-2005 Series Bedienungsanleitung

Digiever

Digiever DS-2200 UHD Series Bedienungsanleitung

Digiever

Digiever DS-2005 Series Bedienungsanleitung

Digiever

Digiever DS-2000 Series Bedienungsanleitung

Digiever

Digiever DS-8500-RM UHD Series Bedienungsanleitung

Digiever

Digiever DS-8212-RM Pro Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung