Digiever DS-2000 Series Bedienungsanleitung

Network Video Recorder

Quick Installation Guide

DS-2000 Series

DS-2005/2009/2012/2016

Quality Service Group

Information in this document is subject to change without notice.

Quick Installation Guide

Thank you for choosing DIGISTOR Network Video Recorder. The following

quick guide will lead you to complete the installation and configuration of the

NVR. Please read the following description carefully.

Pre-installation Notice

Please make sure the following items are prepared for installing DIGOSTOR

DS-2000 Series.

Network connection

Configuration of network cameras

Compatibility of network cameras

Computer for configuring DIGISTOR

1-2 hard disks

Compatibility of hard disk with DIGISTOR

1 slotted screwdriver and 1 Philips screwdriver

*For camera compatibility, please check our website

http://www.digiever.com/support/compatibility.php

System Requirements

The following are minimum system requirements for a personal computer to

operate the DIGISTOR in better performance:

Operating System

Microsoft® Windows® XP/ Vista/ 7

Browser

Microsoft® Internet Explorer 7.0 or above

CPU

MJPEG/MPEG-4/H.264 format: Intel® Dual core CPU 3.0 GHz or above

Network

Minimum 10/100 Ethernet (Gigabit Ethernet is recommended)

Note: * User is suggested to connect cameras and NVR with Gigabit

switch.

Memory

2 GB or above

Graphics Adapter

AGP or PCI-Express, minimum 1024×768, 16 bit colors, 1G memory or

above

Note: It is highly recommended to use a graphics adaptor which

provides higher than resolutions 1024 x 768 in order to experience the full

benefits of the software.

Make sure the display DPI setting is set to default at 96DPI

To set DPI value, right-click on desktop, choose “Settings” tab >>

“Advanced”>> “General.”

CD-ROM Drive

It is necessary to read the operating instructions in the provided CD-ROM.

Adobe Reader

It is necessary to read the operating instructions in the provided CD-ROM.

The audio function will not work if a sound card is not installed in the PC.

Audio may be interrupted depending on network traffic.

Package Contents

NVR Network Video Recorder

Power Cord

Ethernet Cable

Screw Bag

Hard Disk Lock

Product CD

Hardware Description

Front View Rear View

1. LED indicators: LAN, eSATA, HDD1, HDD2

2. Power button

3. USB BACKUP- Auto video backup

4. USB 2.0 X1 (Support auto video backup)

5. HDD1

6. HDD2

7. Gigabit LAN

8. USB 2.0 x 2

9. eSATA x 2 (reserved)

10. DI/DO (4 in 2 out)

11. Reset button

12. Power connector

13. K-lock security slot

Hard Disk Installation

Please follow the steps as illustrated below to install the hardware:

Please take out the disk tray from

NVR.

Please connect the Ethernet cable

to the port of Giga LAN.

Install the hard disk in each tray

and lock the disk with four screws.

Ensure the disk holes match the

holes at the base of disk tray.

Please connect the power cord to

power connector.

Please insert the disk tray into

NVR and push it to the end.

After the power cord is connected,

NVR will automatically turn on and

beep once. The installation of NVR

is complete right now.

Connection to DIGISTOR NVR

Please insert the product CD-ROM on a PC to install EZ Search and S-NVR

Decoder. Finally, you can start Quick Configuration on a web page.

Install EZ Search for finding NVR in the network.

Install S-NVR Decoder.

Connect to the configured NVR and install the ActiveX control.

Install EZ Search

Please execute the product CD and click “Install EZ Search.”

Follow the instructions to install and the EZ Search will run automatically.

Install S-NVR Decoder

Click “Install S-NVR Decoder”and follow the instructions to setup.

Connect to NVR

After setting the EZ Search and S-NVR Decoder, the user can connect to the

monitoring page by the following two options.

Connect to DIGISTOR by EZ Search

Once you click “Connect”or double click the selected NVR list, the IE

browser will pop up automatically.

Connect to DIGISTOR by Manually Opening IE browser

You must enter the default IP address: 192.168.1.245 or other IP address

configured in EZ Search. Enter a user name and password: admin/admin.

To successfully view the interface of NVR from IE browser, please install the

ActiveX control.

Quick configuration

After you install the ActiveX control, the system will direct you to set Quick

Configuration in 5 steps. Follow the instructions of the Overview of wizard to

complete the system setup.

Once the five steps of Quick Configuration are complete, you can click “Start

Liveview” to start monitoring.

For further details of Quick Configuration, please refer to the user manual.

When the live view is displayed, you have successfully installed the DIGISTOR

NVR. Congratulations!

Andere Handbücher für DS-2000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digiever Netzwerk-Videorekorder Handbücher

Digiever

Digiever DS-1100 Pro Series Bedienungsanleitung

Beliebte Netzwerk-Videorekorder Handbücher anderer Marken

Avigilon

Avigilon HD-NVR3-STD-16TB Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 21 Bedienungsanleitung

AVer

AVer E5016 Bedienungsanleitung

Night Owl

Night Owl H5 NVR SERIES Bedienungsanleitung

GeoVision

GeoVision GV-SNVR0811 Bedienungsanleitung

Planet

Planet NVR-1615 Bedienungsanleitung

Q-See

Q-See QT454 Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-ST Series Bedienungsanleitung

HIK VISION

HIK VISION DS-96128NI-I16 Bedienungsanleitung

Security Camera King

Security Camera King NVR-EL-16 Bedienungsanleitung

Honeywell

Honeywell HEN04101(X) Bedienungsanleitung