Digisol DG-GR1010 Bedienungsanleitung

V2.0

05-01-2021

GEPON ONU Router with

1 PON and 1 Giga Port

DG-GR1010

Company has an on-going policy of upgrading its products and it may be

possible that information in this document is not up-to-date.

Please check with your local distributors for the latest information.

No part of this document can be copied or reproduced in any form without

written consent from the company.

Trademarks:

DIGISOL is a trademark of DIGISOL SYSTEMS LTD. All other trademarks

are the property of the respective manufacturers.

1:2 Application Chart

Figure 2

DG-GR1010 ONU meets telecom operators FTTO (office), FTTD (Desk),

FTTH(Home) broadband speed, SOHO broadband access, video

surveillance and other requirements and design an EPON Gigabit Ethernet

products. It is based on mature and stable, cost-effective EPON technology,

high reliability, easy management, configuration flexibility and good quality

of service (QoS) guarantees to meet the technical performance of the

module IEEE802.3ah.

1:1 Product Description

Overview

Figure 1 1GE

1:3 Technical Parameters

Technical item DG-GR1010

PON interface 1 EPON connector, SC single-mode/single-fiber,

downlink/uplink 1.25Gbps

Wavelength Tx:1310nm, Rx:1490nm

Optical interface SC connector

LAN interface 1*10/100/1000Mbps auto adaptive Ethernet interfaces

RJ-45 connector

LED 3 For Status of PON, LAN, SYS

Operating condition Temperature: -10°C ~ +55°C

Humidity: 10% 90% (non-condensing) ~

Storing condition Temperature: -30 60°C ~ °C

Humidity: 10% 90% (non-condensing) ~

Power supply DC 12V/0.5A

Power consumption ≤3W

Dimension 120mm×78mm×30mm (L×W×H)

Net weight 0.13Kg

1:4 Package Content

Contents Quantity

ONU 1 PCS

Power Adapter 1 PCS

User Manual 1 PCS

To avoid equipment damage caused by improper use and personal injury,

please observe the following precautions:

● Do not place the device near water or in damp places, in order to

prevent water or moisture from entering the device.

● Do not place the device in an unstable place, avoid falling damage to

equipment.

● Make sure that the supply voltage of the device matches the required

voltage value.

● Do not open the equipment chassis without permission.

● Unplug before cleaning the power plug; prohibit the use of liquid cleaning.

Installation Environment Requirements

ONU equipment must be installed in the interior, and to ensure the

following conditions:

● Confirmation at the ONU installation at sufficient space to facilitate

cooling machine.

● ONU suitable operating temperature of -10 ~55 , °C °C

humidity 10% to 90%.

Electromagnetic Environment

ONU equipment in use can be affected by external electromagnetic

interferences, such as radiation and conduction through the impact on the

device, this should note the following:

● Device workplace should avoid radio transmitters, radar stations, and

high-frequency interference from power equipment.

● Users cable typically require alignment indoors if outdoor lightning

traces measures should.

Equipment Installation

ONU product is a fixed configuration cassette equipment, site equipment

installation is relatively simple. Simply install the device on a specified place,

connecting the upstream fiber subscriber line connections, connect the

power cable. Actual operation is as follows:

2:1 Installation Requirements

Installation

1. Installed on the desktop

Place the machine on a clean bench, this installation is relatively simple,

you can observe the following operation:

● Ensure the smooth workbench.

● Around the device enough space for heat dissipation.

● Do not place objects on the device.

2. Mounted on the wall

● Observation ONU equipment chassis two cruciform recess, in

accordance with the position of the groove, installed two screws in the

wall.

● The original selected two mounting screws gently snap into recesses

aligned.

● Slowly let go, so that the device under the support of the screw

hanging on the wall.

2:2 Panel Lights

LED Mark Status Description

Registration REG

On and

Green in

colour

The device is registered to the PON system

Off / Red

in colour

Device is not registered to the PON system

Blink Device registration is incorrect

Fast Blink Port is sending or/and receiving data

Interface LINK/

ACT

On Port is connected properly (LINK)

Off Port connection exception or not connected

Blink Port is sending or/and receiving data (ACT)

System SYS

On / Off System is not running or fatal error

Blink Normal running

The following is the default device configuration information.

● Local (LAN access) Username: admin / Password: admin

● LAN port management IP address: 192.168.1.1/24

3:1 Default configuration

Web Management

EPON ONU provides simple Web management functions, including Device

Information, modify Lan Managemenet IP address, Loid and Password,

Configuration File backup and restore, firmware upgrade etc...

NOTE:

About More ONU Detail Configurations should be configured via CTC OAM

Protocols From OLT.

Figure 3 Web Login

3:2 Default configuration

Web login default username: admin, password: admin

Figure 4 Device Information

Device Info Menu displays the current device base informations, including

Hardware Version, Software Version, Boot Loader Version.

Note:

1. All the device information may be changed, the received device shall

prevail.

Figure 5 Modify Loid and Password

OID Menu displays the current device Loid and Password informations.

Loid: 0-24 bytes. Password: fixed 10 bytes.

Note:

1. Usually no need to modify the Version and Vendor Product Code

information, otherwise it may lead to ONU registration problems.

2. All the changes to take effect in the equipment after the restart.

Figure 6 Reboot/ Restore Default

Reboot: The operation to reboot the device.

Restore Default: The operation to restore the device to its factory

configuration.

Note:

1. Press RST button over 10 seconds, ONU can restore factory defaults

and reboot.

2. Press RST button quickly, ONU reboot.

Inhaltsverzeichnis

Andere Digisol Netzwerk-Router Handbücher

Digisol

Digisol DG-FS4510 Bedienungsanleitung

Digisol

Digisol DG-BG4300NU/IS Abmessungen

Digisol

Digisol DG-FS4552 Bedienungsanleitung

Digisol

Digisol DG-BG4300NU/IS Installationsanleitung

Digisol

Digisol DG-HR1400 Bedienungsanleitung

Digisol

Digisol DG-GS1500E series Programmierhandbuch

Digisol

Digisol DG-GR4010 Bedienungsanleitung

Digisol

Digisol DG-HR1400 Bedienungsanleitung

Digisol

Digisol DG-BG4011N Bedienungsanleitung

Digisol

Digisol DH-bg1100n Bedienungsanleitung

Digisol

Digisol DG-FS4526E Bedienungsanleitung

Digisol

Digisol DG-BR5400QAC Bedienungsanleitung

Digisol

Digisol DG-GS1512HP Bedienungsanleitung

Digisol

Digisol DG-GR6010 Bedienungsanleitung

Digisol

Digisol DG-BG100 Bedienungsanleitung

Digisol

Digisol DG-BG1100U Bedienungsanleitung

Digisol

Digisol DG-FS1510HPE Bedienungsanleitung

Digisol

Digisol DG-IS4512HP Bedienungsanleitung

Digisol

Digisol DG-BG4100NU Bedienungsanleitung

Digisol

Digisol RANGER SERIES Bedienungsanleitung

Digisol

Digisol DG-BG4300NU Installationsanleitung

Digisol

Digisol DG-LB1054UV Bedienungsanleitung

Digisol

Digisol DG-BG1100U Bedienungsanleitung

Digisol

Digisol DG-FS4528E Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise