CheXpress®CX30 User Manual
Rev 041715
Page | 4
About the CheXpress CX30
The CheXpress CX30 is an easy-to-use and compact scanner that connects to a personal computer (PC). The
CheXpress CX30 automatically scans the front and/or back of sides of checks and also reads the MICR
(Magnetic Ink Character Recognition) code line. The images and data are then transmitted through a Universal
Serial Bus (USB) interface to the PC. The CheXpress CX30 model has a single-item manual ‘drop and slide’
feeder that offers several modes of operation. The default mode is the ‘Scan & Return’operation. Other
options are ‘Pass Through’and ‘Scan, Park & Return’. These are controlled through the application and by the
exit door position. See the ‘Exit Door Function and Optional Scan Modes’ section for more information on how
to enable the various scan modes.
The CheXpress CX30 model is rated at up to 30 documents per minute (DPM) scanning speed. Speeds will
vary based on the applications used, the PC processing speeds and mode of operation.
The CheXpress CX30 uses mini-connectors in a recessed area in the bottom cover, along with multiple cable
channels to minimize desk footprint and increase placement options. The scanner does not use an On / Off
switch, but it does have a momentary ‘Reset Button’ that can be pressed to reset the scanner, if needed. The
CheXpress CX30 is powered off when the PC powers down, as it senses the loss of power to the ‘USB’ port.
FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the
Department of Communications.
CheXpress CX30 System Requirements
1.6 GHz Pentium IV class processor or faster
1 GB RAM
2.4 GHz Dual Core Processor or faster
2 GB RAM or more
Windows XP, Windows Vista or Windows 7 (32/64 bit)
