Digital Equipment 3000 Kurzanleitung

DEC3000Model600/600SAXP

UpgradeInformation

Order Number: EK–D36AX–UP. B01

Digital Equipment Corporation

Maynard, Massachusetts

Second Printing, April 1994

Digital Equipment Corporation makes no representations that the use of its

products in the manner described in this publication will not infringe on

existing or future patent rights, nor do the descriptions contained in this

publication imply the granting of licenses to make, use, or sell equipment or

software in accordance with the description.

Possession, use, or copying of the software described in this publication

is authorized only pursuant to a valid written license from Digital or an

authorized sublicensor.

The following are trademarks of Digital Equipment Corporation: Alpha AXP,

AXP, Bookreader, DEC, DECaudio, DECchip, DECconnect, DEC GKS, DEC

Open3D, DEC PHIGS, DECstation, DECsystem, DECwindows, DECwrite,

DELNI, Digital, MicroVAX, OpenVMS, RX, ThinWire, TURBOchannel, ULTRIX,

VAX, VAX DOCUMENT, VAXcluster, VAXstation, VMS, and the DIGITAL logo.

The following are third-party trademarks:

CD is a trademark of Data General Corporation.

Open Software Foundation is a trademark of Open Software Foundation, Inc.

OSF, OSF/1, and OSF/Motif are registered trademarks of Open Software

Foundation, Inc. Motif is a registered trademark of Open Software Foundtion,

Inc., licensed by Digital.

ISDN is a registered trademark of Fujitsu Network Switching of America.

Mylar is a registered trademark of E.I. DuPont de Nemours & Company, Inc.

Velcro is a registered trademark of Velcro USA, Inc.

All other trademarks and registered trademarks are the property of their

respective holders.

FCC Notice: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference, in which case users

will be required to correct the interference at their own expense.

S2514

This document was prepared using VAX DOCUMENT Version 2.1.

Contents

1 Kit Contents and Roadmap

Overview ........................................... 1–1

Chapter Overview ................................. 1–1

Purpose of Manual ................................. 1–1

Warning ......................................... 1–3

Mounting Bracket ................................. 1–3

What to Read Next ................................... 1–3

Using This Manual ................................ 1–3

2 Upgrading a MicroVAX 3100 Model 30

Topics Covered in This Chapter ....................... 2–1

Options You Can Upgrade . . . ........................... 2–1

Internal/External Options ........................... 2–1

External Options .................................. 2–2

Upgrade Procedure ................................... 2–3

Step 1: If Your System Has Factory-Installed Drives ...... 2–3

Step 2: Shut Down System .......................... 2–3

Step 3: Disconnect Cables ........................... 2–4

Step 4: Remove System Cover ........................ 2–4

Step 5: Remove Fixed Disk Drives. . ................... 2–4

Step 6: Remove Removable-Media Drive ................ 2–5

Step 7: Set the SCSI IDs on the Drives ................. 2–5

Step 8: Install New Mounting Bracket ................. 2–7

Step 9: Complete the Upgrade ........................ 2–8

Step 10: Return Your MicroVAX System to Digital ........ 2–8

iii

3 Upgrading a MicroVAX 3100 Model 40/80/90, VAX 4000 Model

100/100A

Topics Covered in This Chapter ....................... 3–1

Options You Can Upgrade .............................. 3–1

Internal/External Options . . . ........................ 3–1

External Options . . ................................ 3–2

Upgrade Procedure . . . ................................ 3–3

Step 1: If Your System Has Factory-Installed Drives ...... 3–3

Step 2: Shut Down System . . ........................ 3–4

Step 3: Disconnect Cables . . . ........................ 3–4

Step 4: Remove System Cover ........................ 3–4

Step 5: Remove Fixed Disk Drives..................... 3–4

Step 6: Remove the Upper Drive Shelf . ................ 3–5

Step 7: Remove Removable-Media Drive ................ 3–6

Step 8: Set the SCSI IDs on the Drives . ................ 3–6

Step 9: Install New Mounting Bracket . ................ 3–8

Step 10: Complete the Upgrade ....................... 3–9

Step 11: Return Your MicroVAX to Digital............... 3–9

4 Upgrading a VAXstation 4000 Model 60/90

Topics Covered in This Chapter ....................... 4–1

Options You Can Upgrade .............................. 4–1

Internal/External Options . . . ........................ 4–1

External Options . . ................................ 4–3

Upgrade Procedure . . . ................................ 4–4

Step 1: If Your System Has Factory-Installed Drives ...... 4–4

Step 2: Shut Down System . . ........................ 4–6

Step 3: Disconnect Cables . . . ........................ 4–6

Step 4: Remove System Cover ........................ 4–6

Step 5: Remove H-Bracket . . . ........................ 4–7

Step 6: Remove Drives from the H-Bracket .............. 4–8

Step 7: Remove SPXgt Graphics Module ................ 4–9

Step 8: Remove Removable-Media Bracket .............. 4–11

Step 9: Remove Drive from Bracket.................... 4–12

Step 10: Set SCSI IDs on Drives ...................... 4–13

Step 11: Install New Mounting Brackets ................ 4–16

Note: Other Accessory Kit Brackets . . . ................ 4–17

Step 12: Complete the Upgrade ....................... 4–17

Step 13: Return Your VAXstation to Digital ............. 4–17

5 Upgrading a DECstation/DECsystem 5000 Model

120/125/133/150

Topics Covered in This Chapter ....................... 5–1

Options You Can Upgrade . . . ........................... 5–1

Internal/External Options ........................... 5–1

External Options .................................. 5–3

Options for workstations . ........................... 5–4

Upgrade Procedure ................................... 5–5

Step 1: If Your System Has Factory-Installed Drives ...... 5–5

Step 2: Shut Down System .......................... 5–5

Step 3: Disconnect Cables ........................... 5–5

Step 4: Remove System Cover ........................ 5–6

Step 5: Remove Front Drive Panel . ................... 5–7

Step 6: Remove Removable Media Drives ............... 5–8

Step 7: Remove Fixed Disk Drives. . ................... 5–8

Step 8: Remove Modules . ........................... 5–9

Step 9: Set the SCSI IDs on the Drives ................. 5–10

Step 10: Install New Mounting Bracket ................ 5–12

Step 11: Complete the Upgrade ....................... 5–12

Step 12: Return Your DECstation to Digital . . . .......... 5–12

6 Upgrading a DECstation/DECsystem 5000 Model 200/240/260

Topics Covered in This Chapter ....................... 6–1

Options You Can Upgrade . . . ........................... 6–1

Internal/External Options ........................... 6–1

External Options .................................. 6–3

Options for Workstations . ........................... 6–4

Upgrade Procedure ................................... 6–5

Step 1: If Your System Has Factory-Installed Drives ...... 6–5

Step 2: Shut Down System .......................... 6–5

Step 3: Disconnect Cables ........................... 6–6

Step 4: Remove System Cover ........................ 6–6

Step 5: Remove Option Modules . . . ................... 6–7

Step 6: Set the SCSI IDs on the Drives ................. 6–7

Step 7: Complete the Upgrade ........................ 6–8

Step 8: Return Your DECstation to Digital .............. 6–8

7 Upgrading a DECsystem 3100

Topics Covered in This Chapter ....................... 7–1

Options You Can Upgrade .............................. 7–1

Internal/External Options . . . ........................ 7–1

External Options . . ................................ 7–2

Upgrade Procedure . . . ................................ 7–2

Step 1: If Your System Has Factory-Installed Drives ...... 7–2

Step 2: Shut Down System . . ........................ 7–3

Step 3: Disconnect Cables . . . ........................ 7–3

Step 4: Remove System Cover ........................ 7–4

Step 5: Remove RZ24............................... 7–4

Step 6: Remove RX23 .............................. 7–5

Step 7: Set SCSI IDs on Drives ....................... 7–6

Step 8: Install New Mounting Bracket . ................ 7–8

Step 9: Complete the Upgrade ........................ 7–8

Step 10: Return Your DECsystem to Digital ............. 7–8

Step 11: Update Service Contract ..................... 7–8

8 Upgrading a DECsystem 5100

Topics Covered in This Chapter ....................... 8–1

Options You Can Upgrade .............................. 8–1

Internal/External Options . . . ........................ 8–1

External Options . . ................................ 8–2

Upgrade Procedure . . . ................................ 8–2

Step 1: If Your System Has Factory-Installed Drives ...... 8–2

Step 2: Shut Down System . . ........................ 8–3

Step 3: Disconnect the Cables ........................ 8–3

Step 4: Remove System Cover ........................ 8–4

Step 5: Remove Upper Drive Mounting Panel ............ 8–4

Step 6: Remove EMI Shield, If Present . ................ 8–6

Step 7: Remove Communications Option, If Present ....... 8–8

Step 8: Remove Lower Drive Mounting Panel ............ 8–9

Step 9: Remove Device ............................. 8–11

Step 10: Set SCSI IDs on Drives ...................... 8–12

Step 11: Install New Mounting Bracket. ................ 8–14

Step 12: Complete the Upgrade ....................... 8–14

Step 13: Return Your DECsystem to Digital ............. 8–14

9 Upgrading a DECsystem 5500

Topics Covered in This Chapter ....................... 9–1

Options You Can Upgrade . . . ........................... 9–1

Internal/External Options ........................... 9–1

External Options .................................. 9–2

Upgrade Procedure ................................... 9–2

Step 1: If Your System Has Factory-Installed Drives ...... 9–2

Step 2: Shut Down System .......................... 9–3

Step 3: Locate the RZ56E ........................... 9–5

Step 4: Remove the RZ56E .......................... 9–7

Step 5: Remove Drive Bracket from RZ56E .............. 9–9

Step 6: Remove TLZ04 Tape Drive . ................... 9–13

Step 7: Remove the Top Mounting Bracket .............. 9–15

Step 8: Remove the Bottom Mounting Bracket . .......... 9–17

Step 9: Set SCSI IDs on Drives ....................... 9–18

Step 10: Complete the Upgrade ....................... 9–19

Step 11: Return Your DECsystem to Digital . . . .......... 9–19

10 Upgrading Other Systems

No Options Can Be Upgraded ........................ 10–1

Upgrade Procedure ................................... 10–1

Step 1: Return Your DECsystem to Digital .............. 10–1

Step 2: Update Service Contract . . . ................... 10–1

Figures

1–1 Upgrade Kit Contents . . . ........................... 1–2

4–1 SPXgt 24-Plane Graphics Module . . ................... 4–9

4–2 Removing the SPXgt 24-Plane Graphics Module .......... 4–10

7–1 Remove Diskette Drive from Mounting Plate . . . .......... 7–5

8–1 Cables and Connectors . . . ........................... 8–8

8–2 Location of Captive Screws .......................... 8–9

8–3 Drive Mounting ................................... 8–11

9–1 Keylock Positions .................................. 9–4

9–2 Mass Storage Shelf ................................ 9–5

9–3 Front Panel Assemblies . . ........................... 9–6

9–4 Remove RZ56E . ................................... 9–8

9–5 Remove Bracket Screws . . ........................... 9–9

9–6 Remove Drive Top Bracket .......................... 9–10

vii

9–7 Disconnect Cables . ................................ 9–11

9–8 Remove the Bottom Bracket. . ........................ 9–12

9–9 Remove the TLZ04 Tape Drive........................ 9–14

9–10 Remove Bracket Screws ............................. 9–15

9–11 Remove the Drive Top Mounting Bracket ............... 9–16

9–12 Disconnect Cables . ................................ 9–17

9–13 Remove the Bottom Bracket. . ........................ 9–18

viii

Kit Contents and Roadmap

Overview

Chapter

Overview This chapter contains the following topics:

• Upgrade kit contents

• Using the Manual

Purpose of

Manual The purpose of this guide is to tell customers and Digital

Services which options can be removed from the current system

and used, either internally or externally, in the DEC 3000 Model

600/600S. Step-by-step instructions are provided for removing

the options.

Kit Contents and Roadmap 1–1

Overview

Figure 1–1 Upgrade Kit Contents

Monitor

Video Cable

Antistatic

Wrist Strap

Mousepad

Monitor

Power Cord

System Power

Cord

Modem Loopback

Connector

Screwdriver

System Unit

Documentation

Ethernet Loopback

Connector

Printer Port

Terminator

SCSI

Terminator

Network

Label

Universal

Strain Relief

Strap

Keyboard/Mouse

Extension Cable

System Kit:

Accessory Kit:

xxxxxxx

xxxxxxxxxxx

xxx

Upgrade

Guide

Return

Address Label

Rubber

Grommets

TZ30 RFI

Shield

RX26 Brackets

Metal Support

Plate

MLO-011287

RX26 Bezel

Screws

1–2 Kit Contents and Roadmap

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Equipment Industrieelektrik Handbücher

Digital Equipment

Digital Equipment 2000 Kurzanleitung

Beliebte Industrieelektrik Handbücher anderer Marken

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Technisches Handbuch

Abtech

Abtech HVJB Series Leitfaden

Murata

Murata GRM0335C1H8R1DA01 Series Bedienungsanleitung

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Bedienungsanleitung

Eaton

Eaton Ulusoy HMH24-04 Bedienungsanleitung

Murata

Murata GJM0335C1E4R4BB01 Series Bedienungsanleitung

Newlong

Newlong NP-7H Bedienungsanleitung

Stahl

Stahl 8575/12 Bedienungsanleitung

SI Pegasus Bedienungsanleitung

Murata

Murata GRM1555C1H2R7CA01 Seies Bedienungsanleitung

Murata

Murata GRM0225C1E6R4BA03 Series Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems VXE15 Bedienungsanleitung

S&C

S&C Vista SD Bedienungsanleitung

Murata

Murata GRM0335C2A7R3CA01 Series Bedienungsanleitung

Siemens

Siemens 3VA9988-0BM10 Bedienungsanleitung

Siemens

Siemens SITRANS LVS100 Bedienungsanleitung

Murata

Murata GRM32ER60G227ME05 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MP-Series Bedienungsanleitung