Digital Extender HS-66M Bedienungsanleitung

User Manual

6x6 HDMI Matrix Total Digital Connectivity Solutions

HS-66M

Cautions:

1. Digital Extender® logo is our own trademark of RTcom USA.,Inc.

2. HDMI is a trademark of hdmi.org

3. Any of the products may be changed without any notice in order to improve the function of the product.

4. The design and specification of the product may be changed without any prior notice.

Table of Contents

1. BASIC UNDERSTANDINGS OFTHE PRODUCT ................................................................................................3

1-1 CAUTIONS FOR SAFETY............................................................................................................................................3

1-2 PACKAGE INCLUDES.................................................................................................................................................4

1-3 FEATURES OF THE PRODUCT....................................................................................................................................4

1-4 NAMES AND FUNCTIONS OF EACH PART ...................................................................................................................5

1-5 INSTALLATION ENVIRONMENTS AND METHODS........................................................................................................5

2. FUNCTIONS OF THE PRODUCT ...........................................................................................................................6

2-1. SYSTEM OPERATION CONFIGURATION DIAGRAM.....................................................................................................6

2-2THREE STACK CONFIGURATION...............................................................................................................................7

2-3 SPECIFICATIONS OF THE PRODUCT..........................................................................................................................8

3. HOW TO USE .............................................................................................................................................................8

3-1 HOW TO SET CHANNELS ...........................................................................................................................................8

3-2 PRODUCT NUMBER SETTING ....................................................................................................................................9

3-3 RS-232C(COM PORT) COMMUNICATION SETTING ..............................................................................................10

4. COMMUNICATION CODE CONFIGURATION.................................................................................................10

4-1 CONFIGURATION OF RS-232C COMMUNICATION CODE.........................................................................................10

4-2 LAN (TCP/IP) COMMUNICATION SETTING............................................................................................................13

4-3 CONNECTOR PIN ASSIGNMENT..............................................................................................................................16

5 WARRANTY INFORMATION ................................................................................................................................17

5-1 ONE YEAR WARRANTY ...........................................................................................................................................17

5-2WARRANTY LIMITATION AND EXCLUSION ..............................................................................................................17

5-3 RETURNS................................................................................................................................................................17

•ll outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

•

e power outlet. This is a safety feature. If you are unable to

is ma cause electrical shock or

•such as other equipments on this product.

•Keep it away from liquid, magnetic, inflammable substances.

•It is suggested to perform the product three minutes after the power is on for a precise measurement

and analysis.

1. Basic understandings of the product

1-1 Cautions for safety

•All the safety and user manual should be read before the appliance is operated.

•The safety and operating instructions should be retained for future reference.

Unplug this product from the wa

Use a damp cloth for cleaning.

•Do not use this equipment near wet place.

This product should be operated only from the type of power sources indicated on the marking label. If

you are not sure of the type of power supplied to your home, consult your local power company. For

equipment intended to operate from battery power, or other source, refer to the user manual.

This equipment may be equipped with a 3 wire grounding-type plug, a plug having a third (grounding)

pin. This pin will only fit in to a grounding typ

insert the plug in to the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the grounding-type plug.

•Opening in the cabinet are provided for ventilation and to ensure reliable operation of the equipment

and to protect it from overheating. The openings should never be blocked.

lets, th y

•Do not use any damaged power cords or plugs, or loosed out

fire.

Do not put heavy articles

1-2 Package Includes

•Main body: HS-66M

•

The HS

functio

while m

e next generation standard for A/V connection

•Fu multi output routing

•Su

•En digital signals

EDID data while supporting any HDTV

eo Electronics Standards Association

(VESA) resolution, including projectors with unique resolutions.

•Supports HDTV Signal up to 1080p@60Hz with 36-bit color depth, Dolby® True HD, DTS-HD

•Control through 4 different method

- Select directly with front push button

- Use IR remote controller

- Control method through RS-232C COM port

- Select by LAN (TCP/IP)

•It has an instantaneous noise protection circuit in input and output ports, therefore it can protect

expensive equipment from fault caused by noises (if any).

•Can use up to 24 HDMI sources with a 3 stack configuration

•Power adapter: DC12V, 5A 60

RS232C cable/ LAN cable

•Rack Ears

•User’s manual

•IR Remote Controller

3 Features of the product

-66M HDMI Matrix Router supports the highest quality of HDMI version 1.3 and full matrix routing

ns, it possible to transmit high definition A/V signals from up to six sources to as many as six displays,

aintaining HDCP (High-bandwidth Digital Content Protection) compliance.

•Compliant to HDMI v1.3, DVI v1.0 th

lly supports router function, one input to

pports HDCP Complaint at all output channels

hanced quality and color of

•Built in Extended Display Identification Data (EDID) read function, with Electrically Erasable

Programmable Read-Only Memory (EEPROM), to save display

with maximum resolutions. The unit also supports non-Vid

1-4 Names and functions of each part

< FRONT & BACK PANEL >

1-5 s

For installation, we recommend the following environments.

•Below 85 F (30°C) of ambient temperature (Best condition)

onment below 60% of ambient humidity (Best condition)

•Use it in the environment of free of vibrations and dusts and in good ventilation condition

to use UPS)

In tallation environments and methods

•Install and operate in the envir

•Recommend stabilized AC input power (Recommend

. unctions of the product

2 F

2-1. System operation configuration diagram

The configuration diagram of the matrix operation is shown in following picture.

Any of the HDMI or DVI input signals can be selected to each output port by external RS-232C, LAN or fro

panel button.

Configuration

nals are controllable manually or from remote computers through RS-232 communication.

2-2 Three Stack

This equipment receives signals (6 input ports) from HDMI output ports or equipments compliant to HDMI

specification and sends out to any of output ports. It can receive up to 24 input signals in a 3 stack

onfiguration and give out to any of 6 output ports.c

The sig

System configuration (As for 3 stacks configuration)

Input: 24 channels

Output: 6 channels

Input and output configuration: [6 : 6] * 4 sets, [6 : 6] * 2 sets, [6 : 6] * 1 set.

Input and output connection: 1 output port can select any of 24 input ports. The connection is the shape of 24

input-24 output -> 12 input-12 output -> 6 input - 6 output.

2-3 pe

to 2.25 GHz.

Cr 4:2:2

•Dolby® True HD, DTS-HD and DVD-Audio

l: Front panel push button, IR remote controller,

RS-232C port: 9 pin female D connector,

CP/IP): RJ-45 Connector 10/100 Base-T

e: 20 Watt

•

Length *Heig t): 17.7 * 7.87 *2.36 inch (450 * 200 * 60

•ht: 6.77 lb (3.07kg)

How to us

the matrix is switched ON, then preview buttons are displayed with 2 steps as follow.

tialization is completed.

S cifications of the product

•Type of signals: TMDS signals, digital R.G.B. & Audio

•Data transmission band: up

•Resolutions: Up to 1080p@60Hz,1080i/720p@120Hz, 2k,

bCr, 4:4:4, 16/20/24/30/36-bit YCbCr, 4:2:2, 8/10/12-bitYCb

•12/24/30/36-bit, RGB YC

•Router contro

LAN (T

•Input-output port: 6 input / 6 output

•Input-output connector: HDMI 19 pin female

•Power source: AC/DC Adapter 100-240 VAC / DC12V, 5A

•Power consum

19” standard rack type case (2U)

•Size (Width *

Weig

h mm)

3. e

3-1 How to set channels

If each preview button is lit, then the ini

1. Initialization display

----------- INPUT ----------------- --------- CONTROL -----------

1 2 3 4 5 6 C P EDIDREATE REVIEW ENTER CANCEL

C PRE E CAN EDIRE NT

1 2 3 4 5 6

----------- OUTPUT -----------------

2. C nn

Aft he

----------- ---------- CONTROL -----------

ha el display and input selection

er t initialization is completed, preview is lit.

INPUT -----------------

1 CREATE PREVIEW ENTER CANCEL EDID2 3 4 5 6

CRE PRE ENT CAN EDI

1 2 3 4 5 6

----------- OUTPUT -----------------

he functions of the switches are as follow.

Matrix power on/off

he matrix

tus of current connection

NT) key: save current selection

ection

peration by Push button

nels are displayed in sequence

to be set # →Output button (Multiple selection) set ## →Enter (ENT)

* if u w

Ex utput same pictures

Cre

DID (EDI h is connected with display) →Input #button to be

set(one o play and save them to matrix.

or, DVI monitor) of which power should be on

**If yo

Swit

Create ->IN Enter

3-2 Product number setting

- Produ

sed.

FF, 4 OF

FF, 4 ON, 5 OFF, 6 OFF, 7 OFF, 8 OFF,

od 5 ON, 6 OFF, 7 OFF, 8 OFF

•Main power switch:

•Remote controller receiver: receive infrared ray from remote controller

•Reset key: initialize t

•Input key: select channel from 1 to 6

•Output key: select channel from 1 to 6

•Create (CRE) key: change input/output chann

•Preview (PRE) key: preview the sta

•Enter (E

•Cancel (CAN) key: cancel current sel

•EDID (EDI) key: read EDID data from display then save data to matrix, which is connected to output

ports

Input/output channel check:

Preview (PRE) button →Input # button: present set chan

Input/output channel change

Create (CRE) button →Input button

but n: thto e selection of the channels are changed

cancel button.yo ant to cancel, then press

: CH# 1 input to 1,2,3,4 oample

ate -> Input 1 -> Output 1,2,3,4 -> Enter

ve EDID data

nect HS-66M matrix with display directly.

E) button →Select one of output # button(whic

r multiple) →Enter (ENT): Read EDID data of dis

Matrix output should be connected to display (project

u use DVI display should be save the EDID data to matrix first.

ching Channel by Remote Control unit

->># (ex:1) -> OUT ->#(ex:1,2,3,4)-

ct ID setting (DIP switch)

•It sets address for each matrixes if many matrixes are u

•It sets in binary values.

Ex)

Product ID = 01 (00000001b) -- 1 ON, 2 OFF, 3 O

1 OFF, 2 ON, 3 O

F, 5 OFF, 6 OFF, 7 OFF, 8 OFF,

Product ID = 10 (00001010b) --

Pr uct ID = 23 (00010111b) -- 1 ON, 2 ON, 3 ON, 4 OFF,

D0 D1 D2 D3 D4 D5 D6 D7

LSB MSB

•The product number is the value set in deep switches of the equipment and can be set in the values of 1 ~ 255. The value “0”

y (Factory Default).

After booting the matrix, connect RS-232C cable and then

m ion settings as follows:

•i

•Com setting:

You may set port COM 1 ~ 4 or you all

ava

4. Communication code configuration

4-1 Configuration of RS-232C communication code

From C

is not available.

**The product ID is set number “1” at the time of its deliver

3-3 RS-232C(COM PORT) communication setting

ake communicat

Execute M niTerm.exe or hyper terminal.

munication

may use

ilable ports.

omputer

Code (46Byte) Start Header (3Byte) | Product ID (2 ) | Command (2Byte) | Data (38Byte) | yte)Byte Tail (1B

Code Name By ate Dat Function

Start Header 2 ) R t1h (! equest Frame Star

Start Header 30h (0) Request Frame Start

Start Header 31h (1) Request Frame Start

Product ID 30h ~ 39h (DIP Switch Set) Product Number

01 Input SW Assign

02 Input SW Assign Salvo

03 ED nIE SW Assig

04 EDID SW A gn Salvossi

10 Assignment Status Request

20 Reset

30 Firmware RequestVersion

Command

40 RS232C Assign

Input Data10 30h ~ 39h Input Channel Select

Input Data1 30h ~ 39h Input Channel Select

Output a10 Output aFirst Dat 30h ~ 39h A Input Select Dat

Output a1 Output B In aFirst Dat 30h ~ 39h put Select Dat

Output L a10 Output aast Dat 30h ~ 39h N Input Select Dat

Output L a1 30h ~ 39h Output O Inp aast Dat ut Select Dat

Tail (End) 2Ah(*) Frame End

Andere Handbücher für HS-66M

Inhaltsverzeichnis

Andere Digital Extender Netzwerk-Router Handbücher

Digital Extender

Digital Extender EDM-1818M Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise