Digital Watchdog DWC-MF10M28T Bedienungsanleitung

Quick Start Guide

DWC-MF10M28T DWC-MF10M36TIR DWC-MF10M8TIR

WHAT’S IN THE BOX

QSG Manual 1 Set Mount Bolt & Nut

– 2pcs 1 Set

Manual CD 1 Set Mount Plate 1 Set

Template Sheet

for installing by

Bolt & Nut

1 Set Screw & Plastic

Anchor – 3pcs 1 Set

Template Sheet

for installing by Plate 1 Set Tor x Wrench 1 Set

Username: admin Password: admin

Attention: This document is intended to serve as a quick reference page for initial set-up.

It is recommended that the user read the entire instruction manual for complete and proper camera usage.

Tel: 866-446-3595 / 813-888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

Quick Start Guide

Step 1 – PREPARING TO MOUNT THE CAMERA

So Surface Installation

Step 3 – INSTALLING THE CAMERA

Step 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

1. The mounting surface must bear ve times the weight of your camera.

2. Do not let the cables get caught in improper places or the electric line cover to be damaged.

This may cause a breakdown or re.

3. For the installation process, remove the dome cover from the camera module by loosening

the three (3) screws on the dome. Use the wrench provided with the camera.

4. Using the mounting template sheet or the camera itself, mark and drill the necessary holes in

the wall or ceiling.

For soft installation surfaces, use the included

metal mount plate. Fix the mount plate on the

mounting surface using the included screws.

Then, press the bottom case onto the mount

plate. The three bezels on the case will align

and snap lock onto the plate.

6. To use the camera’s water proof wiring:

(1).Install the LAN cable into (a).

(2).(b) will be assembled to (a) with a 1/4 turn.

(3).Thread (c) tightly to (b).

7. Use the camera’s 3-Axis gimbal to adjust the camera’s tilt and angle. The camera’s maximum tilting

angle is 70.

8. Assemble the dome cover over the camera body and detach the protecting lm from the dome bubble.

5. Pass the wires through the mount bracket and make all necessary connections.

a. NETWORK CONNECTIONS – If you are using a PoE Switch, connect the camera using an Ethernet

cable for both data and power.

b. NETWORK CONNECTIONS – If you are using a non-PoE switch, connect the camera to the switch

using an Ethernet cable for data transmission and use a power adapter to power the camera.

Power Requirements Power Consumption

DC 12V

PoE IEEE 802.3atPoE+ / PoE Class 2

LED Of f: 1.92W, 160mA

LED On: 2.7W, 230mA (IR models only)

NETWORK

CONNECTION

POWER

Template

Sheet

Reset

Button

Note: To ensure moisture seal, make sure the o-ring is in place between (a) and (b). In extreme

environments use of an outdoor rated sealer is recommended.

Resetting the camera: To reset the camera, use the tip of a paper clip or a pencil and press the

reset button. Pressing the button for ve (5) seconds will initiate a camera-wide reset of all the settings,

including network settings.

Note: Please see the full product manual for web viewer setup, functions and camera settings options.

4. The camera’s default network information is:

5. To view the camera’s web viewer, click on ‘View Camera Website’.

6. To save the changes made to the camera’s settings, input the ID

and PW of the camera for authentication and click ‘Save’.

7. If the camera needs to be rebooted after the settings were changed, press the ‘Reboot’ button.

The camera will cycle power and will appear back in the search results once the reboot is complete.

Step 4 – DW IP FINDER™

Use the DW IP Finder ™included in the camera’s accessory CD to scan the network and detect all MEGApix®

cameras, set the camera’s network settings, perform rmware upgrade or access the camera’s web client.

Quick Start Guide

Step 5 – WEB VIEWER

Once the camera’s network settings have been

setup properly, you can access the camera’s

web viewer using the DW IP Finder™. To open

the camera’s web viewer:

1. Find the camera using the DW IP

Finder™.

2. Double-click on the camera’s view in

the results table.

3. Press the ‘View Camera Website’.

The camera’s web viewer will open up

in your default web browser.

4. Enter the camera’s username and password (default are admin / admin).

5. If you are accessing the camera for the rst time, install the VLC les in order to view video from the

camera.

Step 3 – INSTALLING THE CAMERA (CONT.)

Installation using Mount Bolt and Screws:

1. Using the template sheet, make and drill the cabling holes on the wall/ceiling.

2. Secure the two long mounting screws to the camera’s base.

3. Pass the wires through the mount bracket and make all necessary connections.

4. Mount the camera to the mounting surface by using the 2 mounting nuts. Rotate the locking discs over

the screws until the camera is held tightly from the mounting surface.

Select DHCP if the internet service is dynamic IP. This will allow the camera to receive its IP address

from the DHCP server.

Select STATIC to manually enter the camera’s IP address, subnet mask, Gateway and DNS information.

Contact your network administrator for more information.

Note: The camera’s maximum tilting angle is 70°

Default TCP/IP information

• IP: 192.168.1.80 • Gateway: 192.168.1.1

• Subnet Mask: 255.255.255.0 • DNS: 168.126.63.1

‘Port Forwarding’ has to be set in your network’s router for

external access to the camera.

Default ID / PW : admin / admin

SearchforCameras

Camera’s

NetworkSe2ngs

ViewCamera’s

ThumbnailView

Camera’sFirmware

CameraUp>me

OpenCamera’sIP

Conﬁgura>onScreen

FilterSearchResults

CameraName,

Model,IPAddress,

andMACAddress

FirmwareUpgrade

Network Setup

1. Run the CD included with the camera and click on the DW IP Finder™le.

2. The software will scan your network for all supported cameras and display the results in the table. Allow up

to 5 seconds for the IP Finder to nd the camera on the network.

3. Select a camera from the list by double-clicking on the camera’s image or clicking on the ‘Click’ button

under the IP Conf. column. The camera’s network information will appear. If necessary, you can adjust the

camera’s network type.

Dieses Handbuch passt für folgende Modelle

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog DWC-T8553TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B7753TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MVH2I4WV Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light DWC-MC253WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V4783WD Bedienungsanleitung

Digital Watchdog

Digital Watchdog V3373D Bedienungsanleitung

Digital Watchdog

Digital Watchdog V1362DIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix CaaS DWCA-VF25W28-64 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-D6351D Bedienungsanleitung

Digital Watchdog

Digital Watchdog BL352IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix DWC-MVT4WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-HD321M4TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPix DWC-MB62DiVT Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-V6263WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Snapit DWC-HV421D Leitfaden

Digital Watchdog

Digital Watchdog DWC-D3263WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MF5Wi4TWDMP Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MT95WiATW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix Flex DWC-PVX16W2 Bedienungsanleitung

Digital Watchdog

Digital Watchdog Starlight BL5363D Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA853WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MPH2W28TW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPIX PANO DWC-PVF5M1TIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung