Digital Watchdog E.S.T. DW-ESTS Bedienungsanleitung

Part Numbers

Description

DW-ESTS

Camera + Blackbody Kit

DW-ESTCAM

Camera only

DW-ESTBLKBD

Blackbody only

※The picture might differ according to the specification and model.

※Contents of this user manual are protected under copyrights and computer program laws.

Before operating the system, please read this User Manual and retain it for future reference.

※Important Notice: DW E.S.T. is not designed by DW for the specific intention of human fever detection

nor the diagnosis, mitigation, or prevention of disease or health conditions. Rather, the DW E.S.T. system is

intended for the measurement of surface skin temperature as a supplemental method for thermal detection.

Rev: 09/20, Ver. 1.7

USER MANUAL

DW E.S.T. (Elevated Skin Temperature) System

-2-

Contents

1. What’s in the Box................................................................................................................................... 3

2. Camera Connection ............................................................................................................................... 3

3. Installation Diagram and Considerations............................................................................................... 4

3.1. Installation Diagram.................................................................................................................................. 4

3.2. Installation Considerations........................................................................................................................ 5

4. Monitoring PC System Requirements ................................................................................................... 6

4.1. Hardware ................................................................................................................................................ 6

5. Installation Environment Before Installation.......................................................................................... 6

5.1. Check Windows 10 Version ...................................................................................................................... 6

5.2. Windows Update ..................................................................................................................................... 7

5.3. Display Setting......................................................................................................................................... 7

5.4. Power and Sleep ..................................................................................................................................... 8

6. Software Download and Installation ...................................................................................................... 9

6.1. Download Software and Camera Network Configuration ............................................................................ 9

6.2. Install the Software................................................................................................................................. 11

7. Program Installation............................................................................................................................. 12

8. Software Elements............................................................................................................................... 15

8.1. Connection Information .......................................................................................................................... 15

8.2. Functions .............................................................................................................................................. 15

8.3. Maximum Temperature Indication Window .............................................................................................. 19

8.4. Alarm Setting......................................................................................................................................... 20

8.5. History................................................................................................................................................... 21

8.6. Top Navigation Bar................................................................................................................................. 22

8.7. Main Display.......................................................................................................................................... 23

8.8. Blackbody Status ................................................................................................................................... 25

8.9. Status.................................................................................................................................................... 25

9. Run Program........................................................................................................................................ 25

10. Specifications ...................................................................................................................................... 27

11. FAQs .................................................................................................................................................... 29

11.1. Usability ................................................................................................................................................ 29

11.2. Hardware Related .................................................................................................................................. 30

11.3. Compatibility .......................................................................................................................................... 30

11.4. Compliance ........................................................................................................................................... 31

12. Warranty Information ........................................................................................................................... 32

13. Limits and Exclusions ......................................................................................................................... 33

DW E.S.T. (Elevated Skin Temperature) System

-3-

1. What’s in the Box

Review and make sure the following is included in the box with your camera:

•DW-EST: Camera, Blackbody, 2x tripods, 2x DC12V power adapter, QSG.

•DW-ESTCAM: Camera, DC12V power, QSG.

•DW-ESTBLKB: Blackbody, DC12V power, QSG.

2. Camera Connection

Follow the connection diagram below to connect the camera to all external devices.

1. AC/DC Adapter – Connect the power adapter to the camera. When the camera is connected to a

proper power supply, the red light will turn on.

2. Mini-true HD Output – Connect to a monitor.

3. RJ45 (Ethernet) Output – The camera transmits raw data to the monitoring PC via an RJ45

connection. The LED lights up when data is transmitted and received.

4. Alarm Output (Digital Output) – The camera can be integrated into an access control solution using

two (2) digital outputs.

5. Analogue Video Output – Secondary video output for local output during the installation.

6. Color Camera Cable (Visible Camera) – The USB 3.0 cable connects the camera to the monitoring

PC via a USB 3.0 port to get the visible camera’s video output.

DW E.S.T. (Elevated Skin Temperature) System

-4-

3. Installation Diagram and Considerations

3.1. Installation Diagram

The diagram below represents recommended installation settings.

1. Install the camera facing away from the entrance or windows.

2. Place the camera 6.5~16.4ft from the objects (10 feet recommended).

3. Place the camera at a 20° angle from the objects.

4. Make sure people are walking into the camera’s FoV rather than straight towards the camera.

5. Only one person in the FoV at a time.

6. Place the Blackbody across from the camera, positioned in the corner of the camera’s FoV.

7. For optimal readings, the Blackbody should be 9.8~14.7ft from the camera (10 feet

recommended).

8. Recommended room temperature is 68° to 86°F (20° to 30°C).

9. Set up a monitoring station next to the camera with a monitoring PC and personnel. See

‘Camera Connection’ for more information.

10. Always follow elevated temperature readings with additional screening such as a medical

thermometer and wellness questionnaire.

For DW-ESTS installations, where the camera is mounted with a

Blackbody, allow up to 5 minutes for the camera to power up and

calibrate properly.

For DW-ESTCAM installations, where the camera is mounted without

a Blackbody, allow up to 30 minutes for the camera to power up and

calibrate properly.

DW E.S.T. (Elevated Skin Temperature) System

-5-

3.2. Installation Considerations

When considering where to place your screening station, consider the following:

•Avoid placing your camera, Blackbody or people being screened directly under an AC vent or

a strong fluorescent light. The air temperature and heat emitted from the light may impact the

accuracy of the temperature readings.

•Do not place the camera facing a window or large door. These may reflect strong light and

heat from outdoors and have an impact on the accuracy of the temperature readings.

•Consider that any extensive physical activity performed before screening may impact the facial

skin temperature captured by the camera.

DW E.S.T. (Elevated Skin Temperature) System

-6-

4. Monitoring PC System Requirements

Below are the hardware recommendations for the PC used for the ‘Elevated Skin Temperature System’

monitoring software. These are the minimum required specifications for proper execution and usage of the

software.

4.1. Hardware

•CPU: Intel Core i5 or higher (7th generation Intel Core or higher).

•RAM: 8GB or higher.

•HDD: A dedicated HDD is recommended for physical separation of HDD for program installation and

HDD for data storage.

•VGA: NVIDIA GTX 750 or higher (maintain the latest driver).

•OS: Microsoft Windows® 10 Professional 32-bit/64-bit (version 1607 and later).

* Education edition causes installation problems, and not recommended

* Home edition may cause problems during the installation process.

5. Installation Environment Before Installation

5.1. Check Windows 10 Version

Use the shortcut keys of "Windows + R" to start the Launch window, and type "winver" and press "OK".

In the red box, your OS version must be 1607 or higher.

If your version is 1607 or below, please proceed to section "5.2. Update Windows".

DW E.S.T. (Elevated Skin Temperature) System

-7-

5.2. Windows Update

If your Windows 10 version is 1607 or below, you must update Windows. Run "Windows Setup" with the

"Windows ( ) + I" shortcut keys.

Under "Set up Windows" select "Update and Security”

Click "Check for updates" and if there are any updates, proceed with the update. Your PC may reboot several

times during a Windows update.

5.3. Display Setting

If the program does not show all the menu options above, right-click on the desktop and go to “Display

Settings”.

At the “Scale and layout” section, set the following settings:

•“Change the size of text, apps, and other items” into “100%”.

•“Display resolution” into “1920x1080”

* Resolution: Recommended resolution is 1920*1080 and 1600*900 resolution.

In other resolutions (1680*1050, 1600*1024, 1440*900, 1400*1050, 1366*768, 1360*768, 1280*1024,

1280*960, 1280*800, 1280*768, 1280*720, 1280*600, 1176*664, 1152*864, 1024*768, 800*600), all FSM

screens are visible, but the long menus may not display all letters.

DW E.S.T. (Elevated Skin Temperature) System

-8-

5.4. Power and Sleep

For proper usage of the software, make sure the PC’s sleep and power settings are configured as below:

1. Click on "Power and Sleep" in the left menu

2. “Screen” →“When plugged in, turn off after”

3. “Sleep” →“When plugged in, PC goes to sleep after”

4. For both items, select "Never" as shown in the screen below.

DW E.S.T. (Elevated Skin Temperature) System

-9-

6. Software Download and Installation

6.1. Download Software and Camera Network Configuration

1. Install the Elevated Skin Temperature System_x.x.x.x_Setup.exe. The software is available on

Digital Watchdog’s website.

a. Go to http://www.digital-watchdog.com

b. Search for ‘EST software’ in the search bar at the top of the page.

c. The latest software will appear in the search results. Click on the link to download the file to your

computer and run the installation file.

2. Connect the Camera to the monitoring PC via LAN cable directly (CAT.5E UTP cable).

3. When the camera connects directly to the PC, the following is assigned to the camera by default:

•Default Camera IP address: 169.254.100.100

•Default Subnet mask: 255.255.0.0

4. Open the execution window on the monitoring PC by pressing the “Windows ( ) + R” keys.

5. Enter ‘ncpa.cpl’ and press the ‘Enter’ key.

6. Right-click on ‘Ethernet’ and select ‘Properties’ from the drop-down options.

7. Double-click on ‘Internet Protocol version 4 (TCP/IPv4)’ in the Properties window.

8. Enter the IP and subnet mask as shown below and click the ‘OK’ button.

DW E.S.T. (Elevated Skin Temperature) System

-10-

NOTE: Make sure the PC’s IP address is not overlapping with the camera’s IP address. The PC’s IP setting

ranges arbitrarily from 169.254.100.1 ~ 169.254.100.254. Make sure to set the subnet mask to 255.255.0.0.

9. Click the ‘OK’ button in the Ethernet Properties window to close the window.

10. To test the connection with the camera, open the execution window by using “Windows Key ( ) + R”

on the keyboard.

11. Enter ‘cmd’ in the execution window and press the ‘Enter’ key.

12. Enter ‘ping 169.254.100.100’ (if the camera has been manually assigned to a different IP address, enter

that IP instead) and press the ‘Enter’ key.

<Connection successful> <Connection failed. If this happens,

change the LAN cable and check

the subnet mask.>

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Watchdog Wärmebildkamera Handbücher

Digital Watchdog

Digital Watchdog DW-ESTS Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung

Major tech

Major tech MTi11 Bedienungsanleitung