DigitaLinx DL-ARK Kurzanleitung

Rev 190511 Phone: 719-260-0061

Toll-Free: 800-530-8998

Fax: 719-260-0075

DL-ARK Deployment Guide

11675 Ridgeline Drive

Colorado Springs, CO

80921

DL-ARK Deployment Guide

Important Safety Instrucons

»Please completely read and verify you understand all instrucons in this manual before operang this equipment.

»Keep these instrucons in a safe, accessible place for future reference.

»Heed all warnings.

»Follow all instrucons.

»Do not use this apparatus near water.

»Clean only with a dry cloth.

»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

»Use only accessories specied or recommended by Intelix.

»Explanaon of graphical symbols:

◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle

symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product enclosure which may be of sucient magnitude to constute a risk of shock to a person or

persons.

◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended

to alert the user to the presence of important operang and maintenance (servicing) instrucons

in the literature accompanying the product.

»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

»Use the mains plug to disconnect the apparatus from the mains.

»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.

»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of

your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be

maintained.

»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the

point where they exit from the apparatus.

»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.

»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a

cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.

»Unplug this apparatus during lightning storms or when unused for long periods of me.

»Cauon! Shock Hazard. Do not open the unit.

»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

DL-ARK Deployment Guide

Table of Contents

Product Overview�� 5

Product Contents �� 6

Product View�� 7

Receiver - Front �� 7

Receiver - Back �� 7

DL-ARK-4HC Wall Plate Transmier�� 9

DL-ARK-3H1VC Wall Plate Transmier��10

DL-ARK-4HC Wall Plate Keypad Controller ��11

DL-ARK-3H1VC Wall Plate Keypad Controller��12

Installaon Instrucons �� 13

Installing the Receiver��13

Mounng the Wall Plate Transmier��13

Changing Transmiers Decorator Insert Plate ......................................................................................13

Mounng the Keypad Controller��14

Changing Controllers Decorator Insert Plate ........................................................................................14

Changing Controllers Keypad Labels.....................................................................................................14

Connecng Video Sources��15

Connecng Displays ��15

HDBaseT Connecon��15

Connecng Audio Input Sources ��16

Connecng Audio Output��17

Direct Coupled Amplier Output ..........................................................................................................17

70V Amplier Output ...........................................................................................................................18

Line Level Output .................................................................................................................................18

Connecng External IR Display Control��19

Connecng RS232 Control��20

Connecng Ethernet ��21

IP Addressing ........................................................................................................................................21

Connecng to a Router .........................................................................................................................21

Web Browser and TCP/IP Control .........................................................................................................22

Applying Power ��22

Keypad Control and Conguraon�� 23

Control Operaons��23

Audio Output Volume...........................................................................................................................23

Audio Input Selecon ...........................................................................................................................23

Video Input Selecon ...........................................................................................................................23

Display ON/OFF ....................................................................................................................................24

IR Learning Mode Instrucons�� 24

A/V Diagram �� 25

DL-ARK-4HC��25

DL-ARK-3H1VC ��26

DL-ARK Deployment Guide

Web Browser Control and Advanced System Conguraon�� 27

GUI System Controller��27

Advanced System Sengs��29

Conguring Device Name and Locaon ...............................................................................................30

Keypad / GUI Control Protocol Sengs for a Display ...........................................................................31

Seng RS232 Commands for Display and ARK Manger Control ..........................................................32

Changing Auto / Manual Switching Modes ..........................................................................................34

Seng Input EDID / Output Scaling .....................................................................................................35

Adjusng Network Sengs (IP, Subnet, Gateway) ...............................................................................36

Renaming Device A/V Inputs ................................................................................................................37

Changing ARK web GUI Passwords .......................................................................................................38

Adding Custom Logo to web GUI Login ................................................................................................38

Updang Firmware ...............................................................................................................................39

Reseng / Reboong System using web GUI ......................................................................................39

Technical Specicaons �� 40

DL-ARK Deployment Guide

The Digitalinx DL-ARK Advanced Room Kit is a mul-funcon A/V distribuon and push buon control

system designed to provide audio, video and USB 2.0 data extension with complete system control

all in one convenient system. Only two solid core, shielded Category 6 cables are required to connect

the enre system together which consists of one HDBaseT wall plate transmier, one HDBaseT

receiver and one keypad controller. All the power needed for the keypad and wall plate transmier is

provided by the receiver via Category cable / HDBaseT.

There are two systems available in the series; the DL-ARK-3H1VC features 2 HDMI inputs and 1 VGA

with audio input on the wall plate transmier and the DL-ARK-4HC features 3 HDMI inputs on the

wall plate transmier. Both HDBaseT transmiers features a USB B host port for connecon to a

computer or host and a dedicated audio input that is independent of all video inputs. The DL-ARK

HDBaseT receiver for both systems provides an addional HDMI input for a local A/V input, an HDMI

output for a display or projector, a 3 port client USB hub for connecon to interacve white board

or USB mic / camera, a two port LAN switch, mic / line analog audio input, line audio analog output,

40 wa 70 volt power amplier output and an RS232 and IR output for display or projector control

either by keypad controller or web server. The DL-ARK control keypad for both systems features audio

and video input selecon control for all A/V inputs, variable audio control for the mic/line input, line

audio output and amplied audio output from the DL-ARK receiver and can control a connected

display or projectors ON and OFF status via RS232 or IR from the receiver as well. The DL-ARK

systems are UL Listed.

Several DL-ARK systems can be remotely managed by the DL-ARK system management soware

which allows centralized status view and control of a system from anywhere on the LAN.

Product Overview

DL-ARK Deployment Guide

Product Contents

(1) DL-ARK Receiver

Accessories for Receiver

• (1) DC 24V 5A Power Adapter

• (4) AC Cables (US, UK, EU, AU)

• (1) IR 2 Wire Emier

• (2) Phoenix Male Connectors (3.5mm, 2 Pins)

• (4) Phoenix Male Connectors (3.5mm, 3 Pins)

• (4) Phoenix Male Connector (5.08mm, 2 Pins)

• (4) Phoenix Male Connector (5.08mm, 4 Pins)

• (2) Mounng Brackets

• (4) Mounng Screws

• (4) Rubber Feet

(1) DL-ARK 3 Input HDBaseT 2.0 Transmier Wall Plate

Accessories for Wall Plate Transmier

• (1) Plasc Inner Plate, Right, Black.

• (1) Plasc Inner Plate, Le, Black.

• (1) 2-Gang US Plasc Decora Plates, White

• (1) 2-Gang US Plasc Decora Plate, Black

• (4) #6-32*20mm Screws, Silver

• (4) #6-32*7mm Screws, White

• (4) #6-32*7mm Screws, Black

(1) DL-ARK Wall Plate Keypad Controller

Accessories for Keypad Controller

• (1) Plasc Inner Plate, Black

• (1) 2-Gang US Plasc Decora Plates, White

• (1) 2-Gang US Plasc Decora Plate, Black

• (2) #6-32*20mm Screws, Silver

• (2) #6-32*7mm Screws, White

• (2) #6-32*7mm Screws, Black

• (2) Sheet of pre-printed buon labels

• (2) Volume Knob Cap, Black

DL-ARK Deployment Guide

Product View

Receiver - Front

1. POWER LED - Illuminates solid GREEN when device is in ON

2. LINK - Illuminates solid GREEN when device is successfully connected to wall plate

transmier

3. STATUS - Illuminates solid GREEN when receiver is working properly

4. HDBT IN - Illuminates solid GREEN when HDBaseT input is selected

5. HDMI IN - Illuminates solid GREEN when HDMI input is selected

Receiver - Back

1. DC 24V - Locking power supply port

2. RESET - Factory reset buon, press in and hold for 3 or more seconds to reset receiver to

factory default, LED’s on receiver will blink once reset has begun

3. HDBT IN - HDBaseT input; RJ45 connecon

DL-ARK Deployment Guide

4. HDMI IN - HDMI input for connecng local video source

5. HDMI OUT - HDMI connecon for connecng TV display or projector

6. LAN 1/2 - RJ45 Connecons for Ethernet connecon, switch for connecng to 3rd party system

control, computer for web GUI conguraon / control or to connect 3rd party device to same LAN,

i.e. projector or display

7. UPDATE - Micro USB connecon for rmware updates

8. USB 2.0 - 3 port USB 2.0 hub for client side connecons

9. IR OUT- 2 pin phoenix connector to connect IR emier to control 3rd party device such as a display

or projector

10. RS232 OUT - 3 pin phoenix; output port for connecon display or 3rd party control

11. RS232 IN - 3 pin phoenix; input for connecon from 3rd party control system

12. LINE/MIC/48V

• LINE - Seng for line level audio input

• MIC - Seng for mic level audio input

• 48V - Phantom power seng for condenser microphones

WARNING: Before the selector switch is set to posion “48V”, ensure any Line in device connected to

“AUDIO IN” port has been removed; otherwise, device damage may occur.

13. AUDIO IN - 3 pin phoenix; audio input port

14. MUTE - 2 pin phoenix, contact closure for mung output audio of receiver

15. AUDIO OUT - 3 pin phoenix; unbalanced stereo audio output port

16. LEFT-RIGHT - 4 pin phoenix; 8 ohm stereo speaker level output port

17. SELECTOR SWITCH - Switches between 8 ohm and 70v speaker output

18. 70V - 2 pin phoenix; mono 70v speaker output port

DL-ARK Deployment Guide

DL-ARK-4HC Wall Plate Transmier

1. HDMI IN 1-3 - HDMI inputs for connecng to HDMI video sources

2. RESET - Factory reset buon, press in and hold for 3 or more seconds to reset transmier

to factory default, LED’s on receiver will blink once reset has begun

3. UPDATE - Micro USB connecon for rmware updates

4. HDMI IN LEDs - Will illuminate solid GREEN the corresponding HDMI input has been

selected or is currently acve

5. LINK LED - Illuminates solid GREEN when the HDBaseT connecon to the receiver is

connected properly

6. PWR LED - Illuminates solid GREEN when power to the transmier is ON

7. SOURCE SELECT - HDMI input source selector

8. AUDIO IN - 3.5mm connector for dedicated line level stereo audio input

9. USB -USB B connector for connecng USB host such as a computer to the transmier

wall plate

10. TO CONTROL PANEL - RJ45 connecon for connecng Category cable to external keypad

wall plate controller

11. HDBT OUT - HDBaseT output; RJ45 connecon

DL-ARK Deployment Guide

DL-ARK-3H1VC Wall Plate Transmier

1. VGA IN - DB-15 connecon; VGA input for connecng to VGA video source

2. VGA AUDIO - 3.5mm connecon; stereo line level audio input to embed into VGA source

content

3. HDMI IN 1-2 - HDMI inputs for connecng to HDMI video sources

4. RESET - Factory reset buon, press in and hold for 3 or more seconds to reset transmier

to factory default, LED’s on receiver will blink once reset has begun

5. UPDATE - Micro USB connecon for rmware updates

6. VGA LED - Will illuminate solid GREEN the VGA input has been selected or is currently

acve

7. HDMI IN LEDs - Will illuminate solid GREEN the corresponding HDMI input has been

selected or is currently acve

8. LINK LED - Illuminates solid GREEN when the HDBaseT connecon to the receiver is

connected properly

9. PWR LED - Illuminates solid GREEN when power to the transmier is ON

10. SOURCE SELECT - HDMI input source selector

11. AUDIO IN - 3.5mm connector for dedicated line level stereo audio input

12. USB -USB B connector for connecng USB host such as a computer to the transmier

wall plate

13. TO CONTROL PANEL - RJ45 connecon for connecng Category cable to external keypad

wall plate controller

14. HDBT OUT - HDBaseT output; RJ45 connecon

Inhaltsverzeichnis

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung