DIGITIZE DET-16 Bedienungsanleitung

DET-16 User Manual

Digitize, Inc.

158 Edison Road

Lake Hopatcong, New Jersey 0 849

Tel: (9 3) 663-1011 Part Number: 002 1-0001

Fax: (9 3) 663-4333 Revision: G

E-mail: i[email protected] Issue Date: 05/13

Website: http://www.digitize-inc.com Program Ver.: 1.0.6

Digitize, Inc.

158 Edison Road

Lake Hopatcong, NJ 0 849-221

The Digitize logo (stylized) is a registered trademark of Digitize, Inc.

PROPRIETARY NOTICE

AND

DISCLAIMER

DIGITIZE, INC.

158 EDISON ROAD

LAKE HOPATCONG, NJ 0 849-221

PH: (9 3) 663-1011

FAX: (9 3) 663-4333

E-Mail: info@digitize-inc.com

Website: http://www.digitize-inc.com

This manual has been prepared by DIGITIZE, INC. for use by its licensees, distributors and

customers. The information contained herein is the property of DIGITIZE, INC. and may not

be copied, disclosed or reproduced, in whole or in part, without the prior written approval of

DIGITIZE, INC. Any unauthorized disclosure to, or use of the enclosed information by,

unauthorized third persons shall void any and all representations, warranties and obligations

on the part of DIGITIZE, INC.

DIGITIZE, INC. reserves the right to make changes to the specifications and material

contained herein without prior notice. The information and/or examples (including, but not

limited to circuitry, wiring diagrams, programming, the operation or use shown) described in

this manual are intended solely to illustrate the operating principles of the particular product.

They are not a warranty, representation or guarantee that a particular example or use shown

will perform in a particular situation. They are given for illustration purposes only.

DIGITIZE, INC. shall not be responsible, nor does it represent, that any example of

illustration will perform in a particular environment or practice unless it specifically makes a

representation to that effect.

The material set f rth herein is f r inf rmati nal purp ses nly, and

DIGITIZE, INC. assumes n patent liability with respect t any inf rmati n r

illustrati ns c ntained herein.

Table of Contents

1 Introduction.................................................................................................. 1

1.1 System Description .............................................................................................................................. 1

1.2 Specifications ....................................................................................................................................... 3

2 Definitions.................................................................................................... 5

3 System Installation.......................................................................................

3.1 Handling...............................................................................................................................................

3.1.1 Precautions....................................................................................................................................

3.1.2 Unpacking and Inspection ............................................................................................................

3.2 Site Location ........................................................................................................................................

3.3 Installation Details ...............................................................................................................................

4 System Operation....................................................................................... 11

4.1 Power Up ........................................................................................................................................... 11

4.2 Normal Operation .............................................................................................................................. 11

4.3 Battery................................................................................................................................................ 12

4.4 AC Power........................................................................................................................................... 12

4.5 Ground Mode ..................................................................................................................................... 13

4.6 Bulldog............................................................................................................................................... 13

4. Standby Mode .................................................................................................................................... 13

4.8 Alarm Relay ....................................................................................................................................... 14

4.9 Trouble Relay..................................................................................................................................... 14

4.10 Buzzer .............................................................................................................................................. 14

4.11 LCD Display .................................................................................................................................... 14

4.12 Loop Shunt Key Switch ................................................................................................................... 14

5 System Programming................................................................................. 1

5.1 UL 864 Compliance ........................................................................................................................... 1

5.2 4x4+1 Keypad.................................................................................................................................... 1

5.3 How To Modify Panel Settings.......................................................................................................... 18

5.4 Function 1 Zone Settings ................................................................................................................... 18

5.4.1 Setting 1 Zone Box Number ....................................................................................................... 19

5.4.2 Setting 2 Zone Alarm Code ........................................................................................................ 19

5.4.3 Setting 3 Zone Alarm Code Rounds ........................................................................................... 20

5.4.4 Setting 4 Zone Trouble Code...................................................................................................... 20

5.4.5 Setting 5 Zone Trouble Code Rounds......................................................................................... 21

5.4.6 Setting 6 Zone Alarm Restore Code ........................................................................................... 21

5.4. Setting Zone Alarm Restore Code Rounds .............................................................................. 22

5.4.8 Setting 8 Zone Trouble Restore Code......................................................................................... 22

5.4.9 Setting 9 Zone Trouble Restore Code Rounds............................................................................ 23

5.4.10 Setting 10 Disable / Enable Zones ............................................................................................ 23

5.4.11 Setting 11 Preempt Troubles..................................................................................................... 23

5.4.12 Setting 12 Preempt Alarms ....................................................................................................... 24

5.4.13 Setting 13 Preempt Power......................................................................................................... 24

5.4.14 Setting 14 Allow Alarm Preemption......................................................................................... 24

5.4.15 Setting 15 Allow Trouble Preemption ...................................................................................... 24

5.4.16 Setting 16 Allow Restore Preemption....................................................................................... 25

5.4.1 Setting 1 Zones: Normally Open / Normally Closed .............................................................. 25

5.4.18 Setting 18 Zone Priority............................................................................................................ 25

5.4.19 Setting 19 Zone Alarm Level.................................................................................................... 26

5.4.20 Setting 20 Zone Trouble Level ................................................................................................. 26

5.5 Function 2 Low Battery Settings........................................................................................................ 26

5.5.1 Setting 1 Low Battery Box Number ........................................................................................... 26

5.5.2 Setting 2 Low Battery Code........................................................................................................ 2

5.5.3 Setting 3 Low Battery Rounds.................................................................................................... 2

5.5.4 Setting 4 Low Battery Restore Code........................................................................................... 2

5.5.5 Setting 5 Low Battery Restore Code Rounds ............................................................................. 28

5.6 Function 3 AC Fail Settings............................................................................................................... 28

5.6.1 Setting 1 AC Fail Box Number................................................................................................... 28

5.6.2 Setting 2 AC Fail Code............................................................................................................... 28

5.6.3 Setting 3 AC Fail Rounds ........................................................................................................... 28

5.6.4 Setting 4 AC Fail Restore Code.................................................................................................. 29

5.6.5 Setting 5 AC Fail Restore Code Rounds..................................................................................... 29

5. Function 4 Transmission Speed ......................................................................................................... 29

5.8 Function 5 Open Loop Wait Time ..................................................................................................... 30

5.9 Function 6 Free Loop Wait Time....................................................................................................... 30

5.10 Function Bulldog Loop Wait Time ............................................................................................... 30

5.11 Function 8 Buzzer Timeout.............................................................................................................. 30

5.12 Function 9 ........................................................................................................................................ 31

5.13 Function 10 ...................................................................................................................................... 31

5.14 Function 11 Bulldog......................................................................................................................... 31

5.15 Function 12 Ground Mode ............................................................................................................... 31

5.16 Function 13 Open / Closed Indexing................................................................................................ 31

5.1 Function 14 Change Passnumber ..................................................................................................... 32

5.18 Function 15 Alarm Relay Programming .......................................................................................... 32

5.19 Function 16 Edit Standby Timeout .................................................................................................. 32

5.20 Function 1 Standby Mode .............................................................................................................. 33

5.21 Function 18 Reset Factory Defaults ................................................................................................. 33

5.22 Function 19 AC Power Delay .......................................................................................................... 33

6 Det-16 Programming Utility...................................................................... 35

6.1 Overview............................................................................................................................................ 35

6.2 Installation.......................................................................................................................................... 35

6.3 Operation............................................................................................................................................ 36

6.3.1 The File Menu............................................................................................................................. 36

6.3.2 The Transfer Menu ..................................................................................................................... 36

6.3.3 The About Menu......................................................................................................................... 3

6.3.4 Editing a Det-16 Configuration .................................................................................................. 3

6.3.5 Main Screen................................................................................................................................ 3

6.3.6 Zone Settings Window................................................................................................................ 38

6.3. Box Settings Window ................................................................................................................. 38

6.3.8 Uploading Firmware to the Det-16 ............................................................................................. 39

6.3.9 Downloading Firmware from the Det-16.................................................................................... 41

6.3.10 Uploading Settings from the Det-16 ......................................................................................... 42

6.3.11 Downloading Settings from the Det-16 .................................................................................... 43

System Testing........................................................................................... 46

8 System Maintenance.................................................................................. 48

8.1 Recommended Maintenance .............................................................................................................. 48

8.2 Battery Maintenance and Replacement.............................................................................................. 48

002 1-0001 Rev. G 05/13 1

1 Introduction

The DIGITIZE Electronic Telegraph Transmitter, 16 Zone (DET-16) is a solid-state

microprocessor coder for use over telegraph hard wire. The DET-16 is designed to operate

with a loop current from 50 mA to 50 mA.

DET-16 Telegraph Transmitter

1.1 System Descripti n

The DIGITIZE DET-16 is a Telegraph Transmitter for Fire and Security Alarms. The unit

has up to 16 End of Line (EOL) resistor zones and includes a CAM lock, AC transformer,

LCD Display with keypad, standby battery and built-in charger. The unit is housed in a steel

enclosure and is suitable for mounting in convenient, out of the way locations on an interior

wall. The DET-16 can be used on the same loop with mechanical Fire Alarm Boxes.

Introduction Digitize Inc.

2 002 1-0001 Rev. G 05/13

Telegraph codes unique to each of the sixteen zones for Trouble, Alarm and Secure as well

as Low Battery and AC Power Fail are transmitted over a 100 milliampere circuit using

PNIS (Positive Non-Interfering Successive) or SNI (Serial Non-Interfering). The DET-16

has line current detection to avoid clashes between more than one transmitting device.

Automatic ground return, a Watch Dog Timer, and a trouble buzzer assure continued main

system operation and operator notification in the event of a box failure.

DET-16 Panel with Enclosure Door Open Revealing the Display Panel.

Transmission speed is adjustable to match existing decoding units, as are the number of

digits for the box number and the last digit for alarm, trouble, and restore. Number of rounds

for each condition is also programmable.

Automatic switchover to battery power is performed upon AC power loss with a low battery

code transmitted if power is not returned in approximately 0 hours (when the battery

voltage drops below 10.5 volts). When the battery voltage drops below 9.5 volts, the unit

bypasses all input circuits to avoid spurious transmission of false alarms.

Introduction Digitize Inc.

002 1-0001 Rev. G 05/13 3

DET-16 Controller B . in Enclosure

1.2 Specificati ns

AC Power In 115 VAC 50/60 Hz @ 250 mA Max.

EOL Inputs 16 Supervised 4. k Ohm End of Line Resistor Inputs

Telegraph Relay Outputs 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or

120 VAC.

Alarm Output Contacts 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or

120 VAC.

Trouble Output Contacts 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or

120 VAC.

Display 4 line x 20 character, 5 x dots with yellow LED backlight.

Viewing Area: 6 mm Wide x 25.2 mm High.

Keypad 4 x4 Conductive Rubber Switchpad

LED Indicators Alarm (Red), Trouble (Yellow), Loop Problem (Yellow),

Watchdog (Red), AC/DC Input (Green)

Beeper 2,200 ± 300 hz. @ 85 dB.

Ethernet 10/100BASE-T Ethernet – Auto-Sensing

USB USB version 2.0

Standby Battery .5 Amp Hour Sealed Lead Acid, Digitize PN 900414-0004

Panel Size 13.5” wide x 15” high x 4“ deep

Construction Electro Galvanized Steel chassis, plastic front bezel

System Weight approx. 18 lbs. including .5 amp hour battery.

Introduction Digitize Inc.

4 002 1-0001 Rev. G 05/13

Inhaltsverzeichnis

Andere DIGITIZE Sender Handbücher

DIGITIZE

DIGITIZE 1221 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung