Digitus DN-95109 Bedienungsanleitung

Gigabit Ethernet PoE++

Injector, 802.3bt, 85 W

User Manual

DN-95109

Contents

1. Introduction ................................................................................. 2

2. Features ....................................................................................... 3

3. Hardware Description ................................................................... 4

4. Installation ................................................................................... 5

5. Troubleshooting ........................................................................... 5

6. Specifications ............................................................................... 7

Package content:

•Gigabit Ethernet PoE++ Injector, 802.3bt, 85 W

•Cable for non-heating appliances (safety plug / jack IEC 5)

•Quick reference guide

1. Introduction

The 802.3bt injector from DIGITUS® offers an 85 watt PoE port as a

midspan solution. Compact, cost-effective and fully IEEE802.3bt-

compliant. The simple solution for remote power supply of wireless

access points, IP security camera, VoIP phones, thin clients and other

installations with PoE functionality. PoE+/PoE++ compatible devices can

be supplied with power and data using the network cable, a secure and

reliable solution for expanding the existing network infrastructure. The

injector detects various PoE modes (A/B)- Plug & Play.

2. Features

Here are the features of 85W injector:

•Power over Ethernet Injector for 10/100/1000BaseT

•Full IEEE802.3at /bt compliant

•Automatically detects and protects PoE equipment from being

damaged by incorrect installation

•Internal AC/DC converter. No need for external power brick

•Overload and short circuit protection

•Mixes Ethernet and power into RJ-45 port

•Remote power feeding Delivers

•Power up to 100 meters

•Light weight and compact size

•Wall-Mountable design

•Easy Plug-and-Play installation

•Power over Ethernet output power of 56V@1.5A

3. Hardware Description

1. AC Power Input Connector:

This connector connects the AC power source to the PoE Injector.

2. Data IN:

This port is an RJ-45 Ethernet connector where data is received and

transmitted through the PoE Injector.

3. PoE OUT:

This port is an RJ-45 Ethernet connector where data is received and

transmitted through the PoE Injector and provides PoE power along

with the Ethernet data to a PoE device.

4. Alt A LED:

This LED indicates the pins 1/2/3/6 is providing power to the PoE OUT

port or not.

5. Alt B LED:

This LED indicates the pins 4/5/7/8 is providing power to the PoE OUT

port or not.

6. Ground Wire:

Please connect the ground wire

4. Installation

Before placing the Unit:

•Do not to cover PoE Injector or block the airflow to the PoE with any

foreign objects. Keep the PoE Injector away from excessive heat and

humidity and free from vibration and dust.

•Ensure that the cable length from Ethernet network source to the

terminal does not exceed 100 meters The PoE is not a repeater and

does not amplify the Ethernet data signal.

•Use a splitter if desired; ensure that the splitter is connected close to

the terminal and not on the PoE Injector.

•No "on-off" switch exists; simply plug the PoE Injector into an AC

power source.

Installing the Unit:

•Connect the PoE Injector to an AC outlet (100-40VAC), using a

standard power cord.

•Connect the Data IN jack (input) to the remote Ethernet network

switch’s Patch panel and the PoE OUT jack (output) to the terminal.

5. Troubleshooting

PoE Injector dos not power up:

•Verify that a reliable power cord is used.

•Verify that the voltage at the power inlet is between

100 and 240 VAC.

•Remove and re-apply power to the device and check the indicators

during power up sequence

The PD does not operate:

•Verify that the PoE Injector detects a PD.

•Verify that the PD is designed for PoE operation.

•Verify that you are using a standard Category 5/5e/6,

straight-wired cable, with four pairs.

•If an external power splitter is in use,

replace it with a known-good splitter.

•Ensure input Ethernet cable is connected to the DATA IN port.

•Verify that the PD is connected to the Data & Power port.

•Try to reconnect the same PD into a different PoE Injector.

If it works, there is probably a faulty port or RJ45 connection.

•Verify that there is no short over any of the twisted pair cables or

over the RJ45 connectors.

The end device operates, but there is no data link:

•Verify that the port indicator on the front panel is continuously lit.

•If an external power splitter is in use,

replace it with a known-good splitter.

•Verify that for this link, you are using standard UTP/FTP Category 5

straight (non-crossover) cabling, with all four pairs.

•Verify that the Ethernet cable length is less than 100 meters from the

Ethernet source to the load/remote terminal.

•Try to reconnect the same PD into a different PoE Injector If it works,

there is probably a faulty port or RJ45 connection

6. Specifications

Description

Interfaces

1 x RJ-45 Connector for Data

1 x RJ-45 Connector for PoE out + Data

Indicators

PoE: Alt A, Alt B

Standard

IEEE802.3af, IEEE802.3at, IEEE802.3bt

Power Method

100-240VAC, 50/60Hz

Output Voltage

56VDC

Power Supply

90W

PoE Budget

85W

Output PoE Pin Assignment

Alternative A:

V+ (RJ45 Pin3,6), V- (RJ45 Pin 1,2)

Alternative B:

V+ (RJ45 Pin4,5), V- (RJ45 Pin 7,8)

Dimensions

180 x 65 x 40 mm

Weight

0.6KG

Operating Temperature

0 to 40°C

Storage Temperature

-10 to 70°C

Operating Humidity

5 to 95% Noncondensing

Pack list

PoE Injector

1 pcs

User Manual

1 pcs

This is a Class A product. In home environment, this product may cause radio interference. In this

case, the user may be required to take appropriate measures.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the

shipping content. If the Declaration of Conformity is missing, you can request it by post under the

below mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Inhaltsverzeichnis

Andere Digitus Adapter Handbücher

Digitus

Digitus AC600 Bedienungsanleitung

Digitus

Digitus DS-45332 Bedienungsanleitung

Digitus

Digitus DN-7003GS Bedienungsanleitung

Digitus

Digitus DN-10150-1 Bedienungsanleitung

Digitus

Digitus DA-70833 Bedienungsanleitung

Digitus

Digitus DA-70452 Bedienungsanleitung

Digitus

Digitus DN-7042-1 Bedienungsanleitung

Digitus

Digitus DA-70250-1 Bedienungsanleitung

Digitus

Digitus DA-70451 Bedienungsanleitung

Digitus

Digitus DA-70840 Bedienungsanleitung

Digitus

Digitus DN-30211 Bedienungsanleitung

Digitus

Digitus DN-10190 Bedienungsanleitung

Digitus

Digitus eSATA CARDBUS ADAPTER Bedienungsanleitung

Digitus

Digitus DN-70440-1 Bedienungsanleitung

Digitus

Digitus DN-10180 Bedienungsanleitung

Digitus

Digitus DN-7074 Bedienungsanleitung

Digitus

Digitus DA-70300 Bedienungsanleitung

Digitus

Digitus DA-70300-1 Bedienungsanleitung

Digitus

Digitus DA-70830 Bedienungsanleitung

Digitus

Digitus DN-3023 Bedienungsanleitung

Digitus

Digitus DA-70841 Bedienungsanleitung

Digitus

Digitus DA-70202 Bedienungsanleitung

Digitus

Digitus DA-70840 Bedienungsanleitung

Digitus

Digitus DA-70453 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung