Digitus Plug&View Bedienungsanleitung

DIGITUS®Plug&View IP

cameras

User Guide

Plug&View IP camera ׀Manual ׀EN-201310 2

1 Introduction:

The Plug&View IP camera series by DIGITUS offers P2P cloud services in order to avoid the

complicated network configuration for the camera installation. Everything you need is "Plug&View"

and a few installation steps.

2 Supplied with:

-1 X IP camera

-1 X AC adapter

-1 X ethernet cable

-1 X installation CD

-1 X Mounting Accessories

-* DN-16038/DN-16039/DN-16040/DN-16043/DN-16044 also include a built in 2GB memory for

storage.

3 Installation procedure:

3.1 Connect

Please follow the instructions of the Quick Start Guide to connect your Plug&View camera and to

start using it from your user account. Then log in to your user account in http://plug-view.com. After a

successful login you will see an overview of the images of your registered cameras.

4 Description of the toolbar

The toolbar can be found to the right side above the image of each IP camera. Here

you can quickly see the operational readiness and make various settings.

4.1 LED display symbols

Green light

When the green light is ON, your IP camera is online und sending. The video image is

successfully displayed on the screen.

Yellow light

When the yellow light is ON, the IP camera is online, but not yet sending. No video image is

displayed on the screen.

Red light

When the red light is ON, the IP camera is offline and nothing is displayed on the screen.

4.2 Full Screen

The 'Full Screen' button opens a new screen for better viewing of the video image, which is then

displayed across the entire screen.

Plug&View IP camera ׀Manual ׀EN-201310 3

4.3 Live image and PTZ

The button "Live View" will display the live-stream or images from the selected IP camera in real-

time. If you have multiple plug&view cameras installed, you can switch between the different cameras

using the display on the left-hand side of the screen. Use the arrow buttons and to select other

IP cameras from the list.

In the event of connection problems, e.g. because of a slow Internet connection, you can click on

to reload the live-stream or real-time images. By clicking on , on the right side at the bottom of the

screen, one can access the configuration controls for the selected camera.

If the selected IP camera supports PTZ functions, the PTZ control panel, with which you can control

the camera, can be selected. Otherwise the field will be grayed out to indicate that it has no function.

Each motion adjustment requires a click.

4.4 Playback

The "Play back" function is only supported when an SD-card for media recording has been inserted

into the IP camera. By using the blue tags on the time axis, all recorded events can be retrieved. All

recorded events have been stored and tagged with a blue mark on the time axis. You can select to

view them for different time periods, by clicking on the left side of the time axis, on hour (hour), day

(day) or week (week).

Plug&View IP camera ׀Manual ׀EN-201310 4

When hovering over a blue tag with the mouse, the color changes to orange and the details of the

recorded clips are displayed. Select a specific clip to check this.

During playback of the selected media clip, you can stop or pause it, or switch to the next clip, using

the media control buttons. You can also drag the marker of the video search control to the

desired position in the playback.

Settings

The Settings button opens up a special web user interface for the configuration of the IP camera.

Please log in with "admin" as the username and password.

Muting

With the button, you can switch the sound of the camera on or off.

Refreshing

With the Refresh button you can refresh or reload the video image on you IP camera.

Deleting

With the Delete button , you can delete specific IP camera medium from the overview page.

Screenshot

With the Photo button you can take a still shot of the current video image and save it directly to

your PC.

Click on the top right of the screen to exit the full-screen mode or click on the bottom right side

to return to the matrix display page.

Plug&View IP camera ׀Manual ׀EN-201310 5

In the camera matrix, click on "Settings" in order to see the list of cameras.

In this list you can see the details of your camera(s) and by clicking on change the name of the

camera, with you can remove a specific camera from your account and with the hook button

underneath "Device Matrix" select if she should be displayed with a Live Image in the overview.

By clicking on the "Plus" symbol on the left, above the list, an additional

camera can be registered to your account.

Google Drive Backup

To the right your Google Drive Account for the cloud-backup is set up. You must have a

microSD memory card installed in your camera in order to be able ot use Google backup.

Please click on the button "Google authentication" and then accept the request in the following

window to use "Google Drive" as cloud storage, by clicking on "OK".

You will be redirected to the Google drive registration page. Please enter your Google Mail address

and password, if you already have an account.

After entering your Google account information, please accept the access rights to allow for the video-

backup from the camera to the Google drive. The windowwill then close automatically.

Plug&View IP camera ׀Manual ׀EN-201310 6

Through the storage function of Google-Cloud, a copy of your video files from the microSD-card is

loaded onto Google drive. This means, that the videos, triggered by movement or timer, can be

played from the cloud storage, online, using your browser. Please log in to your Google drive and

select the recorded video (RTV) files in the directory "SAT_Recordings" to watch the videos online.

Plug&View IP camera ׀Manual ׀EN-201310 7

5 Camera User Interface

The camera user interface has 6 menu items (Home, Replay, Log, Parameters, System and WiFi).

In order to be able to use the multimedia and control functions, the OCX component must be installed

in Internet Explorer and the VLC Mediaplayer in Firefox and Chrome. A download link will be

displayed in the user interface if necessary.

5.1 Home

This page shows the live image from the camera.

Under "Home" you can also Pan and Tilt (Plug&View Optiarc or similar PTZ cameras), as well as

control the video settings such as brightness, contrast and saturation.

5.2 Replay

5.3 Log

The log records all events such as motion detection or alarm. Select a date and then press the

Search button (magnifying glass) to list all events on this date. To view the recorded video, click on

"View".

Plug&View IP camera ׀Manual ׀EN-201310 8

5.4 Parameters

This is where you configure Network, Video Parameter, DDNS & UPnP, Video Cover, motion

detection, Alarm Setting, CMOS Sensor and Monitor.

5.4.1 Network

Here you assign a fixed IP address to the camera, according to the configuration of your LAN, or

select DHCP if you are using a DHCP-server, such as your router, for the assigning of IP-addresses.

The ports for HTTP, RTSP and RCFG can be modified here, if port forwarding settings are required

on your router.

Plug&View IP camera ׀Manual ׀EN-201310 9

5.4.2 Video Parameter

Under Video Parameter you can configure the resolution, bit rate, Type, frame rate and image quality

of the video stream.

You can choose between 'high' and 'normal video quality'. 'High Quality Video' is used mainly for

high-resolution video streams via a PC with higher clock frequencies and faster Internet connection.

'Normal video quality' is usually for use with mobile phones. The main- and sub stream modes

support Constant Bit Rate (CBR) and Variable Bit Rate (VBR). You can select between 5 levels in the

Image Quality settings: from very high to very low.

5.4.3 DDNS & UpnP

If you want to have additional access to the user interface via a DynDNS provider, activate Dynamic

DNS by selecting "on" and enter your domain and access data. If the camera handles the assignment

of the ports and the forwarding via UPnP, please note, to also adjust the necessary settings on your

router (changes to the security settings to allow UPnP).

5.4.4 Video Cover

"Video Screen" marks any specific area within the video image which is blacked out during a

recording. Activate Video Screen by clicking on "on". Then click inside the video image and drag with

the mouse button from the top left to the bottom right corner of the desired area. A high-lighted color

box will appear, which represents the covered area. Click on "Region 2" to select another area and

repeat the process. Once you have selected up to 4 areas, finish the process by clicking on "OK".

Plug&View IP camera ׀Manual ׀EN-201310 10

5.4.5 Motion Detection

Enable the motion detection with a click on "On".

The colored area within the video image is the

motion detection area, i.e. the area in which a

movement triggers a picture or a video recording.

In the original delivery condition, almost the entire

screen is covered with red boxes. In order to

exclude certain areas from the motion detection,

clickin the bottom right cornerof the colored

marker and move the mouse towards the top

left, while holding the mouse key down.

By doing this, you delete the marker for that area. Respectively, you do the same in the opposite

direction, from top left to bottom right, to select a new area for motion detection. The sensitivity

ranges from 0 to 5, whereby the smallest value represents the highest sensitivity. The typical setting

is 3. The value behind "next motion detection after..." specifies after how many frames the motion

detection will be triggered again. By clicking on "OK" you complete the setting and will then receive a

message in a pop-up window, to set the 'Action' next, which should start as soon as the camera

registers a movement within the range. Confirm with "OK" and you will be automatically moved to the

"Alarm Setting".

Andere Handbücher für Plug&View

Inhaltsverzeichnis

Andere Digitus IP-Kamera Handbücher

Digitus

Digitus Plug&View OptiView DN-16028 Kurzanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung

Digitus

Digitus DN-16055 Bedienungsanleitung

Digitus

Digitus DN-16081 Bedienungsanleitung

Digitus

Digitus DN-16083-1 Bedienungsanleitung

Digitus

Digitus DN-16041-1 Bedienungsanleitung

Digitus

Digitus DN-16029 Bedienungsanleitung

Digitus

Digitus DN-16087 Bedienungsanleitung

Digitus

Digitus DN-16023 Bedienungsanleitung

Digitus

Digitus DN-16087 Bedienungsanleitung

Digitus

Digitus DN-16035 Bedienungsanleitung

Digitus

Digitus DN-16026 Bedienungsanleitung

Digitus

Digitus DN-16084-1 Bedienungsanleitung

Digitus

Digitus DN-16086 Bedienungsanleitung

Digitus

Digitus DN-16027 Bedienungsanleitung

Digitus

Digitus DN-16023 Bedienungsanleitung

Digitus

Digitus DN-16080 Bedienungsanleitung

Digitus

Digitus DIGITUS Plug&View OptiView Bedienungsanleitung

Digitus

Digitus DN-16081 Bedienungsanleitung

Digitus

Digitus DN-16032 Bedienungsanleitung

Digitus

Digitus DN-16035 Bedienungsanleitung

Digitus

Digitus Plug&View Bedienungsanleitung

Digitus

Digitus DN-16084-1 Bedienungsanleitung

Digitus

Digitus DN-16080 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung