Digitus DN-652101-1 Bedienungsanleitung

DIGITUS Industrial Gigabit Media

Converter RJ45

Manual

DN-652101-1&DN-652102-1

DN-652103-1&DN-652104-1

Table of content

1. Introduction................................................................... 2

2. Features......................................................................... 3

3. Package Contents .......................................................... 3

4. Specifications................................................................. 3

5. Switch Panel .................................................................. 5

6. Interface Definition ....................................................... 7

6.1 10/100/1000Base-TX ethernet interface................. 7

6.2 1000base-FX ethernet interface.............................. 8

7. LED Indicator ................................................................. 9

8. Installation caution........................................................ 9

8.1 Installation precautions ........................................... 9

8.2 Din rail installation................................................. 10

8.3 grounding .............................................................. 10

8.4 Power Connection ................................................. 11

1. Introduction

This series of industrial media converter with 1-port

10/100/1000Mbps RJ45 +1 port 1000Mbps Optical meets CE

and RoHS standards. With operating temperature of -40℃~

80 ℃, the switches can be adapted to all kinds of harsh

environment and also placed in the compact space of the

control box. The installation characteristics of the guide rail,

wide temperature operation, IP40 protection class housing

and LED indicator light make the media convertor a plug and

play industrial grade device, providing a reliable and

convenient solution for users to network their Ethernet

devices.

2. Features

1. The use of high quality photoelectric integration module

to provide good optical and electrical characteristics

2. Ensure reliable data transmission and long working life

3. Support full duplex or half duplex mode, with automatic

negotiation capability

4. Network port support automatic cross identification

5. Internal storage and forwarding mechanism, support a

variety of protocols

6. In line with industrial operating standards, the average

trouble-free work in more than 300,000 hours

7. Working power supply:

DC 12-48V to provide reverse protection

DC 48-57V for PoE version DN- DN-652104-1

3. Package Contents

Industrial switch 1pcs

User manual 1pcs

4. Specifications

Standard

IEEE802.310BASE-T;

IEEE802.3i 10Base-T;

IEEE802.3u; 100Base-TX/FX;

IEEE802.3ab1000Base-T;

IEEE802.3z1000Base-X;

IEEE802.3x IEEE802.3af,

IEEE802.3at (DN-652104-1)

Interface

1-Port 10/100/1000Mbps RJ45

1 Port 1000Mbps Optical SC or SFP slot

Work

environment

Working: -40～80 °C

Storage: -40～80 °C

Switch

Bandwidth: 14Gbps

Packet Buffer Memory: 1.2Mbit

Packet Forwarding Rate: 10.5Mpps

MAC Address Table: 2K

Power supply

Input voltage: DC12-48V

Input voltage: DC48-57V

(DN-652104-1)

(two-way power redundancy backup)

Access terminal: Phoenix terminal

Support dual power redundancy

Support reverse connecting protection.

Max Power consumption: 3W

Mechanical

characteristic

IP40 aluminum housing

DIN rail installation

Natural colling, no fan

Weight: 0.4Kgs

Measurement: 128 x 86 x 34mm

Industrial standard

EN55032

Class A

IEC61000-4-2

(ESD):

±8kV(contact),

±12kV (air)

IEC61000-4-3

(RS):

10V/m (80~1000MHz)

IEC61000-4-4

(EFT):

Power Port: ±4kV;

Data Port: ±2kV

IEC61000-4-5

(Surge):

Power Port: ±2kV/DM, ±4kV/CM;

Data Port: ±2kV

IEC61000-4-6

(CS):

3V (10kHz-150kHz); 10V (150kHz-

80MHz)

IEC61000-4-16

(Common mode

conduction):

30V (cont.), 300V (1s)

Frequency

range:

150kHz-80MHz

Impact:

IEC 60068-2-27

Free Fall:

IEC 60068-2-32

Vibration:

IEC 60068-2-6

5. Switch Panel

Side panel: P1 and P2 are the number of connecting

terminals, P+1 and P-1 are respectively to the positive and

negative poles to be connected; Earthing screw, used for

earthing equipment.

Front panel: The yellow LED on the RJ45 port is the LINK light,

which is on when the connection is established and the data

transmission is flashing. The green light on the RJ45 port is

PoE light, which is only on when the switch port is supplying

power to the PD devices (PoE DN-652104-1 only)

Link/Act is green color when optical connection. Power

indicator light is on when connecting with Power.

Switch size（mm）

6. Interface Definition

6.1 10/100/1000Base-TX ethernet interface

This series of switches provides MDI/MDI-X self-identification

with cable support on all 10/100/1000Base-TX ports. In use,

the Ethernet port of the switch can be connected with other

Ethernet terminal devices through network cables (direct or

cross). Please use Class 5 shielded twisted pair. The Ethernet

port pin definition is shown in the following figure:

RJ45 port supports automatic MDI/MDI-X operation, you can

use a straight line to connect to the PC or server, connect to

other switches or hubs. In the through line (MDI), pins 1, 2, 3, 4,

5, 6, 7, 8 correspond to the connection; For the MDI-X port of a

switch or hub, cross lines are used: 1-3, 2-6, 3-1, 6-2, 4-7, 5-8, 7-

4, 8-5.10Base-T/100Base-T (X) pins are defined as follows:

Pin No.

MDI sighal

MDI-X signal

TX+

RX+

TX-

RX-

RX+

TX+

RX-

TX-

4,5,7,8

Note: "Tx ±" refers to send data ±, "Rx ±" refers to received

data ±, and "-" refers to unused data.

6.2 1000base-FX ethernet interface

DN-652101-1: 1000Base multi-mode dual-fiber SC module,

850nm, 2Km cabling.

DN-652102-1: 1000Base single-mode dual-fiber SC module,

1310nm, 20Km cabling.

DN-652103-1: 1000Base SFP module.

DN-652104-1: 1000Base SFP module.

6.2.1 Patch cord classification

According to the transmission mode of light in the fiber, it can

be divided into multi-mode fiber and single-mode

fiber.Multimode fiber has a thick glass core (50 or 62.5μm),

which can transmit light in various modes.However, the high

inter-mode dispersion limits the frequency at which digital

signals can be transmitted, so multimode fibers can be

transmitted over relatively close distances (typically only a

few kilometers).

The single-mode fiber has a very thin glass core (core

diameter, usually 9 or 10μm) and can transmit only one mode

of light.Therefore, its inter - module dispersion is very small,

and it is suitable for remote communication.Under normal

circumstances, the skin is orange for multi-mode, yellow for

single mode.

7. LED Indicator

LED indicator

Status

Definition

Power

Red LED on

Power supplying in

normal

Red LED off

Power supply abnormal

or no powering

Link/

Act

RJ45

Yellow LED

Network connection in

normal

Yellow LED

flashing

Link communication in

normal

Optical

Green LED

flashing

Optical link

communication in

normal

Green LED

off

Optical no

communication

PoE

Green LED

on (RJ45)

PoE work in normal

Green LED

off (RJ45)

No PoE work

8. Installation caution

8.1 Installation precautions

In order to avoid damage to equipment and personal injury

caused by improper use, please follow the following

precautions:

In order to avoid damage caused by falling of the

equipment, please put the equipment in a stable

environment.

When supplying power to the equipment, pay attention

to confirm the range of power supply voltage, as well as

the positive and negative poles of the power supply, so as

not to damage the equipment by wrong operation.

In order to reduce the risk of electric shock, ensure that

the equipment is well grounded in the working

environment.

No matter when, please do not arbitrarily remove the

equipment shell.

When placing the switch, please avoid the area with dust

and strong electromagnetic interference

8.2 Din rail installation

The first step is to check the grounding

and stability of the guide rail: the guide rail

slot of the switch is clamped into the guide

rail; the second step: from the center to

both sides of the guide rail positioning

screws in order. Step 3: Use screws to fix

the mounting rail card slot on the fixed

guide groove at both ends of the guide rail

to ensure that the guide rail and the

switch are fixed on the guide rail vertically

and stably.

8.3 Grounding

Fix the grounding wire to the grounding

screw above the switch, and ensure good

reliable connection of the grounding

system.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digitus Medienkonverter Handbücher

Digitus

Digitus DC-KVS-12 Bedienungsanleitung

Digitus

Digitus DS-40101 Bedienungsanleitung

Digitus

Digitus DS-40133 Bedienungsanleitung

Digitus

Digitus DA-70465 Bedienungsanleitung

Digitus

Digitus DS-45322 Bedienungsanleitung

Digitus

Digitus DS-40310-1 Bedienungsanleitung

Digitus

Digitus DN-82212 Bedienungsanleitung

Digitus

Digitus DS-43305 Bedienungsanleitung

Digitus

Digitus DS-41200 Bedienungsanleitung

Digitus

Digitus DS-45324 Bedienungsanleitung

Digitus

Digitus DS-33155 Bedienungsanleitung

Digitus

Digitus DA-70157 Bedienungsanleitung

Digitus

Digitus DS-33150 Bedienungsanleitung

Digitus

Digitus DN-95208 Bedienungsanleitung

Digitus

Digitus DA-70471 Bedienungsanleitung

Digitus

Digitus DS-40201 Bedienungsanleitung

Digitus

Digitus DA-70460 Bedienungsanleitung

Digitus

Digitus DA-70820 Bedienungsanleitung

Digitus

Digitus DC-33151 Bedienungsanleitung

Digitus

Digitus DN-95130 Bedienungsanleitung

Digitus

Digitus DS-43200 Bedienungsanleitung

Digitus

Digitus DA-70156 Bedienungsanleitung

Digitus

Digitus DA-70146-1 Bedienungsanleitung

Digitus

Digitus DS-45340 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung