Digitus 3-port usb - PS/2 KVM Switches with DVI and... Bedienungsanleitung

User’s Manual

1. Introduction

Thank you for purchasing our Combo DVI KVM Switch! You now have a high quality,

durable system that will enable you to control 3 Host computers and/or servers by using

PS/2 and/or USB Connectors from one console (PS/2 or USB Mouse, PS/2 or USB

Keyboard, and Monitor).

1.1 Features

1. Console your Keyboard/Mouse via either way of PS/2 and/or USB arbitrarily.

2. Controls 3 DVI computers from a single console (Keyboard/Mouse) over USB

and/or PS/2 connections.

3. Speaker enabled.

4. Microphone enabled.

5. Supports Windows, Linux, Mac OS9/OSX, Sun Microsystems.

6. Emulates a keyboard on each PC to allow your computers to boot normally,

without a keyboard error.

7. Supports hot-swap.All devices connected to the KVM can be added or removed

at any time, without shutting the unit down.

8. Supports 2 types of switching: (1) Hardware Push Button, (2) Hot-Keys on PS/2

and/or USB of keyboard arbitrarily.

9. Supports Auto-Scan function to switch video automatically among computers in

preset intervals sequentially.

10. Supports LED display for PC status monitoring.

11. Supports DVI UXGAresolutions up to 1600 x 1200 @ 60HZ.

12. Supports Beeper during switching enabled.

13. Self powered through USB connection.

14. Fully compliant with the USB 1.1/ 2.0 specification

15. Comply with DVII specification and support analog display devices

1.2 LED Indicators:

Selected

: RED LED indicates that the KVM Switch is selected to the corresponding

PC.

On-Line

: GREEN LED indicates that the KVM Switch is ready to the corresponding

PC.

1.3 Package Contents

The product you purchased should contain the following equipment and accessories:

1. 3-Port Combo DVI KVM Switch .

User Manual.

2. Specifications

2.1 General

Specification

Number Of Computers Controlled 3

Selection Method

Push Button and Hot-Key (PS/2 and/or USB Keyboard)

LEDs Red for PC Selection

Green for PC On-Line ready

Video 3 x DVI UXGA female

USB 3 x USB - B type female

Speaker 3 x audio female jacket

Microphone 3 x audio female jacket

PC Connectors

Keyboard 1 x 6 pin mini-DIN female

Mouse 1 x 6 pin mini-DIN female

Video 1 x DVI UXGA female

Keyboard 1 x USB - A type female

Mouse 1 x USB - A type female

Speaker 1 x audio female jacket

Console Ports

Microphone 1 x audio female jacket

Auto-Scan Interval From 5 to 250 Seconds

DDC, DDC2 DVI UXGA monitor Up to resolution: 1600 x 1200

Hot Swappable Yes

Operating systems supported

Windows 98SE/ME/2000/XP/2003 Server, Linux

Mac OS9/OSX and Sun Microsystems

Device driver No Need

Power

By PS/2 and/or USB or External Power Adaptor (Optional)

Cable Length 6 feet (1.80 Meter)

Dimensions (L X W X H) 21.5 x 8.8 x 4.5 cm (5.5 X 3 X 1.7 inches)

Unit Weight 650 g

Housing material Metal

Operating Temperature 32~ 122°F (0~ 50°C )

Humidity 0%~80%RH

3. System Requirements

Console

DVI monitor capable of the highest resolution.

PS/2 and/or USB Keyboard/Mouse

Computer or Server

The following equipment must be equipped with each computer or server.

- Type A USB port.

- DVI connector.

Cables

The Combo DVI KVM Switch is using separate (DVI + USB/Audio) cables.

To purchase the specific cable sets, please contact your dealer.

4. Single installation

4.1 Precaution:

1. Running under OS Windows 98 , we suggest that the PC must be plugged

to PS/2 ports, because of Windows 98 is not supporting installation at first time

as through USB HID installation driver.

2. There are some older PCs supporting USB ports during booting, but you need

to open BIOS USB setting at first.

3. The KVM switch does not support the USB keyboard which has built-in

USB HUB.

4.2 The DVI KVM SWITCH Installation: (Important note)

The DVI KVM can only support the DDC2, DDC1 pass through mode for the

HOST DVI VGAcard, so it is important that you can not power on all the

computers at the same time, otherwise it will be possible that you will get a

blank screen when you switch to other hosts. The right way to power on

computers is : To switch the KVM to the selected host which you want to

power on, then turn on the host, after you can see the Window desktop

environment shown on selected host, then you can switch to other Hosts, as

same method to turn on selected host and wait for the window desktop screen

show up. After all the computers have been turned on under above

procedures means all of continuous operations will be working fine as well.

5. Operations

The 3-Port Combo Free DVI KVM Switch has the ability to switch the keyboard,

video, mouse simultaneously

Note: When using the two-step Hot Key sequences, the keys must be pressed

within 5 seconds; otherwise the Hot Key action will be terminated.

5.1 Push Button on front panel

5.2 Hotkey Selection ( USB and/or PS/2 keyboard )

Note:

If your keyboard is without < Scroll Lock > button,

please press < Caps Lock > or <Num Lock > instead of Scroll Lock ( ref. 5.2.0 ).

5.2.0 Instead hotkey Selection

Hot Key:

[Ctrl] →[Ctrl] →[Caps Lock] →[Enter] : The hotkey changed to [Caps Lock]

[Ctrl] →[Ctrl] →[Num Lock] →[Enter] : The hotkey changed to [Num Lock]

[Ctrl] →[Ctrl] →[Scroll Lock]→[Enter] : The hotkey reversed to [Scroll Lock]

Note : The default hotkey setting is <Scroll Lock> button as if you chang the

hotkey default setting, the new setting will effect on the KVM switch until

power off or reset.

5.2.1 PCs Selection

Hot Key:

[Scroll] →[Scroll] →[ 1 ] →[Enter] or

[Scroll] →[Scroll] →[ 2 ] →[Enter] or

[Scroll] →[Scroll] →[ 3 ] →[Enter]

You can synchronize the PC selection, by using the following two-step Hot Key

sequence. To send commands to the Combo Free DVI KVM Switch, press the

[Scroll] key twice (Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to

assign the PC to a particular PC. ( If you press key [1] or [2] or [3] on the number

pad, the keyboard, mouse & video will also be switched synchronously )

5.2.2 Auto-Scan Function

Hot Key:

[Scroll] →[Scroll] →[S] →[Enter] to BEGIN.

[Scroll] →[Scroll] →[S], →[Enter] to STOP.

You can activate the Auto-Scan function by using the following two-step Hot Key

sequence. To send commands to the Combo Free DVI KVM Switch, press the [Scroll]

key twice (Step 1), then press [S] and then press [Enter] (Step 2). When you press

the Auto-Scan hot key sequence, the Combo Free DVI KVM Switch alternates

between the three PCs and displays them on the monitor.

Each PC is display one of time interval from 5 ~ 250 seconds (The interval is

adjustable) before switching to the next. When you press the Auto-Scan Hot Key

sequence again, the Auto-Scan will stop and the monitor screen will jump back to the

original PC.

Adjustable scan time interval setting ( 5 ~ 250 sec. )

Hot-key: Pressing the <Scroll >, <Scroll > then <S> and <10 ~250 > <Enter>

5.2.3 Beeper Enable

Hot Key:

[Scroll] →[Scroll] →[B] →[Enter] to Disable

[Scroll] →[Scroll] →[B] →[Enter] to Enable

The Speaker/Beeper’s default setting is “Enable”. While the switching connections

are activated and Speaker/Beeper is in “Enable”status, the beeper has a short

beeping sound.

5.3 Audio (Speaker + Microphone) Selection

5.3.1 ( PC+Audio ) Combination Selection

Hot Key:

[Scroll] →[Scroll] →[ F1 ]→[Enter] or

[Scroll] →[Scroll] →[ F2 ]→[Enter] or

[Scroll] →[Scroll] →[ F3 ]→[Enter]

5.3.2 Single Audio ( Speaker + Microphone ) Selection

Hot Key:

[Scroll] →[Scroll] →[A] →[Enter] to enable or disable the audio auto switch mode

[Scroll] →[Scroll] →[A] →[1]→[Enter] to select PC1 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[2]→[Enter] to select PC2 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[3]→[Enter] to select PC3 Speaker and Microphone

Note 1: Audio auto switch mode, the default setting of KVM switch is enabled,

means when you used the push button, the PCs andAudio will be switched

at the same time. In case of the Audio auto switch mode is disabled, then the

push button only switch PCs.

Note 2: One long sound –Audio auto switch disabled

Two short sound –Audio auto switch enabled

Hot Key definition table

Step 1 Step 2 Action

[Scroll] + [Scroll]

[1] + [ Enter ] Switch the active connection to PC 1

[Scroll] + [Scroll]

[2] + [ Enter ] Switch the active connection to PC 2

[Scroll] + [Scroll]

[3] + [ Enter ] Switch the active connection to PC 3

[Scroll] + [Scroll]

[A] + [ Enter ] Disable or enable the Audio auto switch mode

[Scroll] + [Scroll]

[F1] + [ Enter ] Combined switching (PC+Audio) to PC 1

[Scroll] + [Scroll]

[F2]+ [ Enter ] Combined switching (PC+Audio) to PC 2

[Scroll] + [Scroll]

[F3] + [ Enter ] Combined switching (PC+Audio) to PC 3

[Scroll] + [Scroll]

[A] + [1] + [ Enter ]

Single switching the active audio to PC 1

[Scroll] + [Scroll]

[A] + [2] + [ Enter ]

Single switching the active audio to PC 2

[Scroll] + [Scroll]

[A] + [3] + [ Enter ]

Single switching the active audio to PC 3

[Scroll] + [Scroll]

[B] + [ Enter ] Disable or enable beeper

[Scroll] + [Scroll]

[S] + [Enter] Activate the Auto-Scan mode, default 5 sec.

[Scroll] + [Scroll]

[S] + [5 -250 ] +

[ Enter ]

Select the Auto-Scan interval from 5 to 250 Sec.

Sun Microsystems Function Key Emulation:

There are 16 special functions on the Sun Microsystems keyboard, the Combo Free

DVI KVM Switch can emulate these function keys via the PS/2 and/or USB keyboard.

Here is the mapping table for these functions operation. To active these emulation on

the PS/2 and/or USB keyboard, you have to press the LEFT Window KEY first (this

key usually is located between the left [Ctrl] and left [Alt]), then choice the second

relative key.

Sun Micro System

Function Key PS/2 Keyboard

Stop L_Win & L_Alt

Props L_Win & L_Ctrl

Compose L_Win & L_Shift

Front L_Win & F1

Open L_Win & F2

Find L_Win & F3

Again L_Win & F4

Undo L_Win & F5

Copy L_Win & F6

Paste L_Win & F7

Cut L_Win & F8

Help L_Win & F11

Power L_Win & F12

Mute L_Win & 1

Volume Down L_Win & 2

Volume UP L_Win & 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digitus Schalten Handbücher

Digitus

Digitus DA-70242-1 Bedienungsanleitung

Digitus

Digitus DN-95639 Bedienungsanleitung

Digitus

Digitus DN-80212 Bedienungsanleitung

Digitus

Digitus DS-45320 Bedienungsanleitung

Digitus

Digitus DN-60021-1 Bedienungsanleitung

Digitus

Digitus DA-70220 Bedienungsanleitung

Digitus

Digitus DC IC812I-MC Bedienungsanleitung

Digitus

Digitus DA-73301 Bedienungsanleitung

Digitus

Digitus DS-12901 Bedienungsanleitung

Digitus

Digitus 5-Port HDMI Switch Bedienungsanleitung

Digitus

Digitus DN-50021 Bedienungsanleitung

Digitus

Digitus DN-651130 Bedienungsanleitung

Digitus

Digitus DS-45338 Bedienungsanleitung

Digitus

Digitus DN-651126 Bedienungsanleitung

Digitus

Digitus DA-73300-2 Bedienungsanleitung

Digitus

Digitus DN-80069 Bedienungsanleitung

Digitus

Digitus DN-95113 Bedienungsanleitung

Digitus

Digitus DN-651132 Bedienungsanleitung

Digitus

Digitus DN-80201 Bedienungsanleitung

Digitus

Digitus DS-12423 Bedienungsanleitung

Digitus

Digitus DN-50012-1 Bedienungsanleitung

Digitus

Digitus DA-70135-3 Bedienungsanleitung

Digitus

Digitus 16 PORT GIGABIT ETHERNET NETWORK SWITCH Bedienungsanleitung

Digitus

Digitus DN-80066 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch