Digitus DN-80120 Bedienungsanleitung

4-Port Gigabit Network Switch,

1 SFP Uplink

Quick Installation Guide

DN-80120

1. Product Introduction

DIGITUS® 4-Port Gigabit Network Switch, 1 SFP Uplink.

The product provides high-speed packet forwarding capability and

ample backplane bandwidth to ensure clear and smooth image

transmission. It is embedded in static electricity and surge

protection circuit to improve product stability. It also supports VLAN

configuration mode, which enables network storm suppression,

protects security information, and prevents the spread of viruses

and network attacks. It fully meets the requirements of network

video surveillance system.

2. Product Feature

1. 4-port 10/100/1000 Mbps RJ45 LAN port

2. 1-port 1000Mbps fiber port (SFP slot)

3. VLAN configuration by DIP switch

4. Long distance mode support distance of 330m

at 10Base-T data rate.

5. VLAN configuration: Port Isolation & 1 to 1 Isolation

6. Full power range 100~240V AC

7. IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z

8. Provide wall-mount bracket

3. Package Content

Network switch



Wall mount bracket



Power cord

QIG

4. Specifications

Power part

Power supply

Adapt to the

voltage range

AC 100 ~ 240V

Power

consumption

<10W

Port

parameters

Ports

1~4 Electrical interface:

10/100/1000 Mbps

Fiber interface: 1000 Mbps

Transmission

distance

Electrical interface :

Normal mode, 0-100m

Long-distance mode,0-330m

Fiber interface: 20km

Switching

Specification

Network

standards

IEEE802.3/802.3u/802.3z/802.3ab

Packet cache

512 Kbits (5 ports switch)

1 Mbits (9 ports switch)

MAC-Address

capacity

Status

indicator

Power LED

1(green)

SPD LED

L/A LED

SPD: On is 100M(1000M),

Off is 10M(10/100M)

L/A: On is Link

Off is Down, Flash is Act

Fiber LED

1(green)

Environmental

Limits

Operating

Temperature

-20 °C ~ 60 °C

Storage

Temperature

-40 °C ~ 85 °C

Ambient

Relative

Humidity

5-95%

Physical

Characteristics

Dimensions

109mm×125mm×32mm

(5 Port Switch)

Housing

Aluminum shell, IP30 protection

Color

black

Weight

0.43kg (5 Port Switch)

Installation

DIN-rail mounting, wall mounting

(with optional kit)

Reliability

MTBF

≥500000h

5. Product Overview

DIP Switcher

Fiber Link LED

Power LED

SFP Uplink Port

Electric port Link LED

RJ-45 Port

Electric port rate LED

AC Power connector

Electric port number

5.1 Product Diagram

Broadband Router

Home Cinema

Wireless Access Point

IPTV

Laptop

Game Player

VoIP Phone

Network cable

IP Camera

Fiber cable

5.2 LED Indicator

LED

status

Description

PWR

Power Operating normally

off

PWR is not connected or is not

operating properly

Link

Port link UP

flash

Port forwarding data

off

Port link DOWN or not connect

10/100/1000

Base-T

(Gigabit switch)

1000Base-T

off 10/100Base-T

5.3 DIP switch

The switch defaults to the standard network mode at the factory,

and the dial keys ①and ②are in the off position. After the device

is power on, all of ports are interoperable.

One-to-one isolation: Dial key ①to on position, dial key ②

default off position. After the device is power on, it starts the one-

to-one isolation mode configuration and implements the

corresponding ports of the two ports. In this case, the ports on the

same device cannot be forwarded to each other. They can only

communicate with the corresponding port on the peer device.

Port Isolation: Dial key ②to on position, Dial key ①default off

position. After the device is power on, port isolation is achieved. The

RJ45 ports cannot communicate with each other, the

communication takes place between the SFP port and the individual

RJ45 ports.

Long distance mode: Dial key ①and ②to on position. After the

device is power on, the long-distance mode configuration is enabled

and the electrical port rate is 10Base-T. The transmission distance of

the electrical port is increased. At this time the device port

transmission distance of 0-330 meters.

Notes

1 to 1 isolation mode must require two identical

switches, through the optical port docking network can

be used.

6. Important function

6.1 Port Isolation

The switch cannot carry out data transfer between each other, only

to the optical port to communicate, so the data conversion more

efficient, the system is running more secure.

6.2 One-to-one Isolation

When two switches A and B are connected through the optical

interface, the A switch port 1 can only communicate with the B

switch port 1. Similarly, A switch port 2 can only communicate with

B switch port 2, and so on. To establish one-to-one isolation mode

between A and B switches’ RJ45 ports, it requires 2pcs of same

switch. It prevents the network storm, eliminating the paralysis of

the system.

6.3 Long distance mode

By default, the switch electrical port transmission distance of 0-100

meters, open long distance mode, the electrical port for 10Mbit/s,

to meet the high-definition video transmission bandwidth while

increasing the maximum transmission distance of 330 meters. Thus

enabling the ability to install IP cameras at the front of the field.

7. Installation

7.1 Precautions

When placing the switch, please pay attention to stability, drop will

cause serious consequences.

Should be in the correct power supply to work properly, please

confirm before using the power supply and switch the power

requirements specified in line.

To reduce the risk of electric shock, do not open the case when the

switch is working, even if it is not charged, do not open it yourself.

When the switch works, the network cable can be inserted or pulled

out at the port without interrupting the work of the switch.

Before cleaning the switch, pull the switch's power plug first, wipe it

with a moisturizing fabric, and do not use liquid cleaning.

Do not place the switch in a watery or humid place and prevent

water and moisture from entering the switch housing.

When placing the switch, please avoid dusty and strong areas of

electromagnetic interference

7.2 Install style

There are two install methods that can be installed on the desktop

and wall mounted.

Notes

This product does not contain other fixed accessories

other than fixed mounting screws;

When installing or moving, please unplug the power cord.

7.2.1 Install to the desktop

You can place this product directly on a clean, solid, grounded desk.

7.2.2 Wall mounted

You can also place this product on a clean, solid vertical wall. The

installation process is as follows:

1. Fix the mounting brackets with screws

2. Insert the capsules into the holes on the wall. (The capsules are not

included in the package.)

3. Insert the screw into the hole of the dowel. Please use screws with

a diameter of 3-5 mm. Fix the network switch with the screws.

8. Connect the cable

1) Before installation, please turn off the power of each signal

source and the device to be displayed. The installation of the

power supply may cause damage to the transmission equipment.

2) Use the network cable to connect the network camera and

the 1-4 Electrical port of the device respectively;

3) Connecting the optical fiber interface of the device with the

optical fiber interface of the uplink equipment using the optical

fiber line.

4) To connect the power supply equipment.

5) Check whether the installation is correct, equipment damage, to

ensure that all connections are reliable, to the system power.

6) To confirm whether the network equipment, power supply,

work is normal.

9. Appendix - Port Properties

9.1 Electrical port properties

Interface Type

RJ45

Speed

10/100/1000Mbps (Gigabit switch)

Duplex mode

Half-duplex, full-duplex, adaptive

Cable standard MDI/MDI-X

Support standards

IEEE 802.3/802.3u

Cable type

10Base-T: 3/4/5 twisted pair, supports a

maximum transmission distance of 300m

100/1000Base-TX: 5/6 twisted pair,

supports a maximum transmission

distance of 100m

9.2 Fiber port properties

Interface Type

SFP slot

Speed

1000Mbits (Gigabit switch)

Duplex mode

Full-duplex

Support standards

IEEE802.3u, IEEE802.3z

Media and

transmission

distance

50/125um multimode fiber, supports

550m transmission distance

62.5/125um multimode fiber, supports

270m transmission distance

9/125um single-mode fiber, supports

1-120km transmission distance

Inhaltsverzeichnis

Andere Digitus Schalten Handbücher

Digitus

Digitus DS-45320 Bedienungsanleitung

Digitus

Digitus DN-80066 Bedienungsanleitung

Digitus

Digitus DA-70247 Bedienungsanleitung

Digitus

Digitus DA-70240 Bedienungsanleitung

Digitus

Digitus DA-73300-2 Bedienungsanleitung

Digitus

Digitus DN-95355 Bedienungsanleitung

Digitus

Digitus DN-95140 Bedienungsanleitung

Digitus

Digitus DS-45317 Bedienungsanleitung

Digitus

Digitus DS-11403 Bedienungsanleitung

Digitus

Digitus DA-70235 Bedienungsanleitung

Digitus

Digitus DS-44100-1 Bedienungsanleitung

Digitus

Digitus DN-95341-1 Bedienungsanleitung

Digitus

Digitus DN-95331 Bedienungsanleitung

Digitus

Digitus DN-80115 Bedienungsanleitung

Digitus

Digitus DN-80221-3 Bedienungsanleitung

Digitus

Digitus DN-650107 Bedienungsanleitung

Digitus

Digitus DN-651109 Bedienungsanleitung

Digitus

Digitus DN-80071 BLACK RAPID 1000 Bedienungsanleitung

Digitus

Digitus DS-45341 Bedienungsanleitung

Digitus

Digitus DA-70228 Bedienungsanleitung

Digitus

Digitus DN-60021-1 Bedienungsanleitung

Digitus

Digitus DA-70231 Bedienungsanleitung

Digitus

Digitus DC IC812I-MC Bedienungsanleitung

Digitus

Digitus DN-95311 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung