Digitus DN-95348-1 Bedienungsanleitung

Gigabit Ethernet

PoE Switch 24-port PoE +

2-port SFP, 370W PoE

budget

Quick Installation Guide

DN-95348-1

Table of Contents

1. Introduction ............................................................................. 2

2. Features ................................................................................... 3

3. Package Contents..................................................................... 3

4. Specifications ........................................................................... 3

5. External Component Description............................................. 5

5.1 Front Panel ......................................................................... 5

5.2 Real Panel........................................................................... 7

6. Installing and Connecting the Switch....................................... 8

6.1 Installation ......................................................................... 8

6.2 Rack-mountable Installation in 19-inch Cabinet................ 8

6.3 Connect Computer (NIC) to the Switch ........................... 10

6.4 Switch connection to the PD............................................ 10

1. Introduction

The DIGITUS 24-Port Gigabit Rack mount Switch with 24 Power over

Ethernet ports and two additional SFP Fiber Port, offers your network

significant improvement in terms of performance and efficiency. Thanks

to PoE support, you only need a single (network) cable for power and

data transfer. This switch makes it much easier to connect devices such

as access points, network cameras, and IP telephones, and requires far

less cabling than alternatives. It also allows you to extend your network

in places where there are no power supply cables or sockets available.

The switch does not require any configuration and therefore guarantees

quick and seamless integration into the network.

Moreover, can be manually switched to a Normal mode, or Flow Control

mode, or VLAN mode to suitable for various occasions flexibly. Based on

Gigabit Ethernet Technology, it is essential to helping solve network

bottlenecks that frequently develop as more advanced computer users

and newer applications continue to demand greater network resources.

2. Features

1. Supporting Normal mode, VLAN mode and Flow control mode,

flexible to switch

2. Gigabit Ethernet Speed

3. Additional 2 port SFP-Uplink for Fiber Technology

4. Rack mountable in system rack (1U)

5. 24 x 10/100 / 1000 Mbps self-adapting RJ45 ports,

support port auto-flip (Auto MDI/MDIX);

6. 2 x 1000 Mbps SFP ports;

7. The UTP port supports the auto-negotiation function and

automatically configures the transmission mode and the

transmission rate

8. Use of Store-and-Forward architecture

3. Package Contents

Gigabit Ethernet PoE Switch 24-port PoE + 2-port SFP,

370W PoE budget

Power cord

QIG

4. Specifications

Hardware Specifications

Standards and Protocols

IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab,

IEEE 802.3x, IEEE 802.3az, IEEE 802.3at,

IEEE 802.3af

Interface

24 x 10/100 / 1000Mbps self-adaptive

RJ45 ports, support port auto flip (Auto

MDI / MDIX)

2 x 1000Mbps optical fiber adaptive ports

Network Media

10Base-T: UTP category 3, 4, 5 cable

(maximum 100m)

100Base-Tx: UTP category 5, 5e cable

(maximum 100m)



1000Base-T: UTP category 5e, 6 cable

(maximum 100m)

1000Base-SX: 62.5μm/50μm

MMF(2m~550m)

1000Base-LX: 62.5μm/50μm

MMF(2m~550m) Or

10μm SMF(2m~5000m)

Transfer Method Store-and-Forward

MAC Address Table 8K

Switching Capacity 52Gbps

Packet Forwarding Rate 38.688Mpps

Packet Buffer 4.1Mbit

Jumbo Frame 9216Bytes

Working

Mode

Normal

mode

Enable Flow Control and all ports can

communicate with each other

Flow

control

mode

Disable Flow Control and all ports can

communicate with each other

VLAN mode

Port 1~24 cannot communicate with each

other, but can communicate with the

uplink port 25F~26F

PoE Ports (RJ45) 24x PoE ports compliant with 802.3at/af

Power Pin Assignment 1/2(+),3/6(-)

PoE Budget 370W

LED

indicators

Per Device Power: Green

Per Port Link/Act, PoE

Power Supply 100~240VAC,50/60HZ,400W

Power Consumption Maximum (PoE on):421.2W(220V/50Hz)

Support Support MAC address self-learning

Dimensions (W x D x H) 440x208x44mm

Environment

Operating Temperature: 0°C ~45°C

Storage Temperature: -40°C ~70°C

Operating Humidity:

10%~90% non-condensing

Storage humidity:

5%~90% non-condensing

5. External Component Description

5.1 Front Panel

The front panel of the Switch consists of a series of LED indicators, one

Mode Switch, 24 x 10/100/1000Mbps RJ-45 ports and 2x SFP ports as

shown as below.

LED indicator: The LED Indicators will allow you to monitor, diagnose and

troubleshoot any potential problem with the Switch, connection or

attached devices.

The following chart shows the LED indicators of the Switch along with

explanation of each indicator

LED Indicator

Faceplate

Marker

Status Indication

Power

Indicator PWR

Off Power Off

Solid green Power On

Ethernet port

indicators

(1-24)

Link/Act

/Speed

Off The port is NOT connected

Solid green

The port is connected

at 1000Mbps.

Solid

orange

The port is connected

at 100/10Mbps

Blinking

The port is transmitting or

receiving data.

SFP port

indicators

(25F~26F)

Link/Act

Off The port is NOT connected

Solid green

The port is connected

at 1000Mbps

Blinking

The port is transmitting or

receiving data

PoE status

indicators

(1-24)

PoE

Off

No PD is connected to

the corresponding port,

or no power is supplied

according to the power

limits of the port

Solid green

A Powered Device is

connected to the port, which

supply power successfully

Blinking

The PoE power circuit

may be in short or the

power current may be

overloaded

Mode Control:

You can select the switch mode.

Normal mode (Normal): Enable Flow Control and all ports can

communicate with each other.

Flow control mode: Disable Flow Control and all ports can

communicate with each other.

VLAN mode: 1 to 24 cannot communicate with each other, but can

communicate with the uplink port 25F~26F.

10/100/1000Mbps RJ-45 ports (1~24):

Designed to connect to the device with a bandwidth of 10Mbps,

100Mbps and 1000Mbps. Each has a corresponding Link/Act/Speed

and PoE indicator.

SFP ports (25F~26F):

Two SFP transceiver module ports, each port corresponds to one SFP

indicator lights.

5.2 Real Panel

The rear panel of the Switch shown as below.

AC Power Connector:

Power is supplied through an internal power supply. It supports AC

100~240V, 50/60Hz.

Grounding Terminal:

Located on the left side of the power supply connector, use wire

grounding to lightning protection.

6. Installing and Connecting the Switch

This part describes how to install your PoE Ethernet Switch and make

connections to it. Please read the following topics and perform the

procedures in the order being presented.

6.1 Installation

Please follow the following instructions in avoid of incorrect installation

causing device damage and security threat.

Put the Switch on stable place or desktop in case of falling damage.

Make sure the Switch works in the proper AC input range and

matches the voltage labeled on the Switch.

To keep the Switch free from lightning, do not open the Switch's

shell even in power failure.

Make sure that there is proper heat dissipation from and adequate

ventilation around the Switch.

Make sure the cabinet to enough back up the weight of the Switch

and its accessories.

Desktop Installation

Sometimes users are not equipped with the 19-inch standard cabinet.

When installing the Switch on a desktop, please attach these cushioning

rubber feet provided on the bottom at each corner of the Switch in case

of the external vibration. Allow adequate space for ventilation between

the device and the objects around it.

6.2 Rack-mountable Installation in 19-inch Cabinet

The Switch can be mounted in an EIA standard-sized, 19-inch rack,

which can be placed in a wiring closet with other equipment.

To install the Switch, please follow these steps:

1. Attach the mounting brackets on the Switch's side panels (one on

each side) and secure them with the screws provided.

2. Use the screws provided with the equipment rack to mount the

Switch on the rack and tighten it.

Power on the Switch:

The Switch is powered on by the AC 100-240V 50/60Hz internal high-

performance power supply. Please follow the next tips to connect:

AC Electrical Outlet:

It is recommended to use single-phase three-wire receptacle with neutral

outlet or multifunctional computer professional receptacle. Please make

sure to connect the metal ground connector to the grounding source on

the outlet.

AC Power Cord Connection:

Connect the AC power connector in the back panel of the Switch to

external receptacle with the included power cord, and check the power

indicator is ON or not. When it is ON, it indicates the power connection

is OK.

6.3 Connect Computer (NIC) to the Switch

Please insert the NIC into the computer, after installing network card

driver, please connect one end of the twisted pair to RJ-45 jack of your

computer, the other end will be connected to any RJ-45 port of the

Switch, the distance between Switch and computer is around 100 meters.

Once the connection is OK and the devices are power on normally, the

LINK/ACT/Speed status indicator lights corresponding ports of the Switch.

6.4 Switch connection to the PD

1-24 ports of the Switch have PoE power supply function, the maximum

output power up to 30W each port, it can make PD devices, such as

internet phone, network camera, and wireless access point work. You

only need to connect the Switch PoE port directly connected to the PD

port by network cable.

CE Mark Warning: This is a Class A product. In home environment, this

product may cause radio interference. In this case, the user may be

required to take appropriate measures.

Hereby Assmann Electronic GmbH, declares that the Declaration of

Conformity is part of the shipping content. If the Declaration of

Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Inhaltsverzeichnis

Andere Digitus Schalten Handbücher

Digitus

Digitus DN-650107 Bedienungsanleitung

Digitus

Digitus DN-95357 Bedienungsanleitung

Digitus

Digitus 3-port usb - PS/2 KVM Switches with DVI and... Bedienungsanleitung

Digitus

Digitus 8/16-Port Combo KVM OSD Switch For Usb And... Bedienungsanleitung

Digitus

Digitus DN-80066 Bedienungsanleitung

Digitus

Digitus DS-45317 Bedienungsanleitung

Digitus

Digitus DA-70241-1 Bedienungsanleitung

Digitus

Digitus DN-50012-1 Bedienungsanleitung

Digitus

Digitus DN-95345 Bedienungsanleitung

Digitus

Digitus DS-12891 Bedienungsanleitung

Digitus

Digitus DN-95320 Bedienungsanleitung

Digitus

Digitus DN-651132 Bedienungsanleitung

Digitus

Digitus DS-45338 Bedienungsanleitung

Digitus

Digitus DN-80069 Bedienungsanleitung

Digitus

Digitus DN-95342-1 Bedienungsanleitung

Digitus

Digitus DS-12820 Bedienungsanleitung

Digitus

Digitus DS-45305 Bedienungsanleitung

Digitus

Digitus DN-651113 Bedienungsanleitung

Digitus

Digitus DA-70242-1 Bedienungsanleitung

Digitus

Digitus DS-12820 Bedienungsanleitung

Digitus

Digitus DN-95311 Bedienungsanleitung

Digitus

Digitus DA-70228 Bedienungsanleitung

Digitus

Digitus DN-95331 Bedienungsanleitung

Digitus

Digitus DA-70241 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung