Digitus Switcher Bedienungsanleitung

- 1 -

4-Port Pocket

USB KVM Switch with USB 2.0 Hub

Manual

- 2 -

Index

1. INTRODUCTION............................................................................................. 3

1.1 F

EATURES

...................................................................................................... 3

1.2 P

HYSICAL

IAGRAM

......................................................................................... 4

1.3 P

ACKAGE

ONTENTS

....................................................................................... 4

2. SPECIFICATIONS .......................................................................................... 5

2.1

ERAL

.............................................................................................................. 5

2.2 LED I

NDICATORS

............................................................................................. 6

3. INSTALL THE USB KVM SWITCH ................................................................. 7

3.1 S

YSTEM

EQUIREMENTS

.................................................................................. 7

3.2 H

ARDWARE

NSTALLATION

................................................................................. 7

3.3 Notice for Sun Micro System user.................................................................. 7

3.4 P

OWERING

P THE

YSTEMS

............................................................................ 7

3.5 D

RIVER

NSTALLATION

...................................................................................... 7

3.6 U

SING THE

OSD P

ROGRAM

.............................................................................. 10

4. SWITCHING THE USB KVM SWITCH............................................................ 13

*AUTO-SWITCH FUNCTION............................................................................... 15

*AUTO-SCAN FUNCTION................................................................................... 15

*Sun Micro System Key Emulation...................................................................... 17

- 3 -

1. Introduction

Thank you for purchasing our USB KVM Switch! You now have a high

quality and durability system that can give you the control over multiple

computers/servers from one console (Mouse, Keyboard and Monitor).

1.1Features

1. Controls 4 computers from a single console (Keyboard/Mouse) over USB

connection using standard USB cables.

2. Supports PS/2 and USB Keyboard/Mouse (Hot-Key function supports

only on PS/2 Keyboard).

3. Fully compliant with the USB 2.0 specification.

4. Supports Windows, Linux, Mac OS9/OSX, SunMicro Solaris 8 (For Sun

Micro users, the external power adaptor is necessary when using the

KVM Switch).

5. Supports 3 USB 2.0 downstream ports.

6. 4 computers can share 3 USB 2.0 Downstream ports.

7. Supports 3 types of switching: hardware push button, Hot-Keys on PS/2

keyboard, and On-Screen-Display (OSD) utility software (for Windows

only).

8. OSD and LED display for easy status monitoring.

9. OSD utility indicates:

1. Power status of connected computer(s).

2. Active host computer.

10.Provide HUB switching in independent method or combination with the

host switching( AutoSwitch mode ).

11.Auto-Scan function (Time interval can be adjusted between 5-20

seconds when the Auto-Scan function is enable).

12.Supports VGAresolutions up to 2048x1536 @ 85HZ.

13.Plug and Play (Windows 98/SE users might need your Windows CD to

install the HID driver for USB Keyboard/Mouse).

- 4 -

1.2Physical Diagram

1.3 Package Contents

The product you purchased should contain the equipment and

accessories shown as follows:

1. USB KVM Switch.

2. 2 pcs. KVM cable sets, 1,8 m

3. CD with users manual, On-Screen-Display(OSD) utility.

Host LED HUB

Push Button

AutoScan Button AutoScan LED C

Hub AutoSwitch LED

- 5 -

2. Specifications

2.1 General

Specification

Operating Temperature 5~ 40°C

Humidity 0%~80%RH

Dimensions (LxWxH) 200 x 82 x 44mm

Unit Weight 721g

Number Of Computer Controlled 4

PS/2 Keyboard & Mouse Support Yes

Keyboard Hot-Key Switching Supported Yes (By PS/2 Keyboard only)

USB 2.0 Downstream ports 3

Compliant with USB Version USB 1.0 / USB 1.1 / USB 2.0

Compliant with HID Version USB HID 1.1, 2.0

Over-Current protection design for USB

Downstream ports Yes

Power By Host or ExternalAdaptor (Optional)

Basic Power Consumption DC 5V

Bus-Power limit current protection 500mA (When external adaptor applied)

Output Voltage 5V

Output Current 2A

OSD (On Screen Display) Yes (Application Program, Windows only)

DDC, DDC2 monitor Yes (Max. Resolution: 2048x1536)

Hot Pluggable Yes (USB & PS/2)

Auto-Scan function Yes (5 ~20 seconds)

Support Sun Micro Serious Yes

Support Mac Serous Yes

Support Linux Serious Yes

Device driver No

- 6 -

2.2 LED Indicators

l Power status LED indicator:

On (Green): The power is connected and the device is ready to work.

Off: No power is connected.

l USB 2.0 Downstream Ports LED Indicator:

ON (Green): USB ports are ready to work.

Off: USB ports are in over-current condition or are not ready to work.

Note:

If over-current situation happens for certain USB downstream ports, the

corresponding USB 2.0 indicator will turn OFF to indicate that these ports

is not working now. When over-current situation is solved, the USB

indicator will turn ON again.

l Auto-Switch LED Indicator:

ON: Auto Switch mode is on.

Off(Green): Auto Switch mode is off.

l Auto-Scan LED Indicator:

Off: Auto Scan mode is off.

ON (Green): Auto Scan mode is on.

l PC Host LED Indicator (Red):

ON: Indicates which Host PC is selected.

l HUB LED Indicator (Green):

ON: Indicates which Host connect with the three USB 2.0 downstream

HUB ports.

- 7 -

3. Install USB KVM Switch

3.1 System Requirements

APC with 1 spare USB port and 1 VGA port.

Windows 98 or later, Mac OS9/OSX, Solaris 8 (SUN BLADE 100), Linux

Kernel 2.3 or later.

3.2 Hardware Installation

Make sure that the USB port of your computer is enabled and working

properly.

Connect the USB cable Type-A end to the USB port of your computer,

and the USB cable Type-B end to the any available upstream on USB

KVM Switch.

Connect the VGA male-to-female cable between the video port of your

computer and video port that corresponds to the USB port you selected in

step 2.

Repeat steps 1-3 for any other computers you are connecting up. Up to 4

computers can be connected at the same time.

Plug the power adaptor cable into the USB KVM Switch (optional).

3.3 Notice for Sun Micro System user

Since some Sun Micro system will detect the monitor information, if

system fail to get information from the Monitor, then you won’t get any

screen came out. So for safety, “YOU MUST SWITCH USB KVM

SWITCH TO THE SUN MICRO SYSTEM”before you power on the Sun

Micro System.After you seeing the screen from the Sun Micro System,

then you can switch to any other Host. If you have multiple Sun Micro

systems, then you have to repeat this procedure one by one.

3.4 Powering up USB KVM Switch

USB KVM Switch supports USB plug & play technology. All the

components can be added and removed at any time without the need to

shut the unit down.

3.5 Driver Installation (Windows 98/SE only)

After you connect USB KVM Switch to your PC, Win 98 will automatically

detect the device and prompt for the driver installation. Please install USB

KVM Switch by following the instruction from Step A-E.Please have your

Windows 98 CD ready.

- 8 -

Fig. A

Fig. B

Fig. C

A. Press “Next”to

Continue.

(Ref. Fig. A)

B. Tick “Search for the

best driver for your

device”and press “Next”

to continue.

(Ref. Fig. B).

C. Please insert the

“Windows 98”CD into

your CD-ROM drive. Tick

“CD-Rom drive”

and press

“Next”to continue.

(Ref. Fig. C)

- 9 -

Fig. D

Fig. D1

* The driver might be located in a different directory from the figure

above.

D. Press “Next”to start

the installation process.

(Ref. Fig. D)

D1. Sometimes Windows

cannot locate the

necessary driver

automatically. So you

need to choose “Browse”

to specify the location of

the driver on your

“Windows 98”CD

manually. *

(Ref. Fig. D1)

- 10 -

Fig. D2

Fig. E

3.6 Using the OSD program

Fig. F

D2. Press “OK”to

continue

(Ref. Fig. D2)

E. Press “Finish”and

Windows has finished

installing the USB Human

Interface Device driver for

PS/2 keyboard & mouse.

(Ref. Fig. E)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digitus Schalten Handbücher

Digitus

Digitus DC-11201-1 Bedienungsanleitung

Digitus

Digitus DA-73300 Bedienungsanleitung

Digitus

Digitus DS-45303 Bedienungsanleitung

Digitus

Digitus DA-70224-1 Bedienungsanleitung

Digitus

Digitus DA-70251 Bedienungsanleitung

Digitus

Digitus DA-70248 Bedienungsanleitung

Digitus

Digitus DS-12820 Bedienungsanleitung

Digitus

Digitus DA-70221 Bedienungsanleitung

Digitus

Digitus DN-80068 Bedienungsanleitung

Digitus

Digitus DS-12890 Bedienungsanleitung

Digitus

Digitus DN-8021B Bedienungsanleitung

Digitus

Digitus DN-80067 Bedienungsanleitung

Digitus

Digitus DS-12404 Bedienungsanleitung

Digitus

Digitus DA-70241-1 Bedienungsanleitung

Digitus

Digitus DN-80118 Bedienungsanleitung

Digitus

Digitus DS-11403 Bedienungsanleitung

Digitus

Digitus DC-OC-12U Bedienungsanleitung

Digitus

Digitus DN-651148 Bedienungsanleitung

Digitus

Digitus Professional DN-60013 Bedienungsanleitung

Digitus

Digitus DN-650105 Bedienungsanleitung

Digitus

Digitus DS-45338 Bedienungsanleitung

Digitus

Digitus DS-15202 Bedienungsanleitung

Digitus

Digitus DN-80112-1 Bedienungsanleitung

Digitus

Digitus DN-95104 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung