Dimplex CX-MPC Bedienungsanleitung

Owner’s Manual

Model

CX-MPC

7212190100R02

IMPORTANT SAFETY INFORMATION: Always read this manual rst

before attempting to install or use this device. For your safety, always

comply with all warnings and safety instructions contained in this

manual to prevent personal injury or property damage.

To view the full line of Dimplex products, please visit

www.dimplex.com

2 www.dimplex.com

Table of Contents

!NOTE: Procedures and

techniques that are considered

important enough to emphasize.

CAUTION: Procedures and

techniques which, if not carefully

followed, will result in damage to

the equipment.

WARNING: Procedures and

techniques which, if not carefully

followed, will expose the user to

the risk of re, serious injury, or

death.

Welcome & Congratulations . . . . . . . . . . . . . . . . . . 3

IMPORTANT INSTRUCTIONS . . . . . . . . . . . . . . . . 4

Product Overview ...........................5

Wall Setter Installation .......................7

InitialSetUp ..............................8

Program Schedule Set up . . . . . . . . . . . . . . . . . . . . 10

General Functions. . . . . . . . . . . . . . . . . . . . . . . . . . 12

Operation................................15

Maintenance .............................17

Warranty ................................18

Reference Tables ..........................19

Welcome & Congratulations

Thank you and congratulations for choosing to purchase a Multi-zone

Programmable CONNEX™ Controller from Dimplex.

Please carefully read and save these instructions.

CAUTION: Read all instructions and warnings carefully before

starting installation. Failure to follow these instructions may result in a

possible electric shock, re hazard and will void the warranty.

Date Code

NO NEED TO RETURN TO THE STORE

Questions with operation or mounting? Require Parts Information?

Product Under Manufacturer’s Warranty?

For Troubleshooting and Technical Support

OR Toll-Free 1-888-DIMPLEX (1-888-346-7539)

Monday to Friday 8:00 a.m. to 4:30 p.m. EST

Please have your model number and product serial

number ready. (See above)

4 www.dimplex.com

CAUTION: This equipment has been

tested and found to comply with the limits

for Class B digital device, pursuant to

part 15 of the FCC Rules. These limits

are designed to provide reasonable

protection against harmful interference in

a residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed and

used in accordance with the instructions,

may cause harmful interference to radio

or television reception, which can be

determined by turning the equipment off

and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

Reorient or relocate the receiving•

antenna.

Increase the separation between the•

equipment and the receiver.

Connect the equipment into an outlet•

on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced•

radio/TV technician for help.

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation.

FCC CAUTION: Any changes or

modications not expressly approved by

the party responsible for compliance could

void the user’s authority to operate this

equipment.

This device complies with Industry

Canada licence-exempt RSS standard(s).

Operation is subject to the following

two conditions: (1) this device may not

cause interference, and (2) this device

IMPORTANT INSTRUCTIONS

must accept any interference, including

interference that may cause undesired

operation of the device.

WARNING: Remote control

contains small batteries. Keep away

from children. If swallowed, seek

medical attention immediately.

WARNING: Do not install battery

backwards, charge, put in re or mix

with used or other battery types - may

explode or leak causing injury.

Product Overview

The Multi-zone Programmable

CONNEX™ Controller is a Dim-

plex exclusive, operating four

individual heat zones wirelessly

from one remote location.

CONNEX™ wireless technology

easily synchronizes multiple Lin-

ear Proportional Convectors and

Precision Comfort Heaters to one

controller for precise temperature

control throughout the home. The

easy-to-use touch screen allows

for 7-day/ 4-event programming

that combines with zone heating

for incredible energy savings.

Multi-zone Programmable CON-

NEX™ Controllers link wirelessly

to Dimplex Linear Proportional

Convectors and Precision Com-

fort Heaters to provide simple

whole home control.

Zones

The controller is set up so that the

user can divide their house into

to up to 4 different heating zones.

These can be separate heaters

or a selection of one or more

heaters that will all be set to run

at the same time and temperature

settings.

By dividing the house into zones

you can program the controller to

raise the temperature in par-

ticular rooms during the time you

normally use them and reduce the

temperature when they are not in

use.

By having a wireless controller

the components within a zone

do not have to be located in the

same area of the house, as with

traditional heating systems. The

components in any particular

zone can be spread all through

the house.

For example:

Zone 1 - All of the bedrooms,•

Zone 2 - All of the bathrooms,•

Zone 3 - Kitchen and Living room.•

CAUTION: Zones can be set

up as any combination of the

Dimplex electronic controlled

heaters as long as there is one

heater that is within 15m (50ft) of

the controller and the subsequent

heaters are within 15m (50ft) of

the controller or any other heater.

Events

The controller has been designed

to divide each day into 4 different

time settings for each day– Wake,

Away, Home and Sleep.

• Wake – Initial increase

of heat to desired temperature

use.

6 www.dimplex.com

• Away – A decreased

temperature set point while

the area is not in use.

• Home – An increased

temperature set point for nor-

mal usage.

• Sleep – Reduce tem-

perature set point while you

are sleeping.

!NOTE: When programming

times for temperature events to

take place, adjust the time setting

so that temperature begins to

increase before you will want it to

be, i.e. your kitchen takes 17 min-

utes to increase in temperature

from 18°C to 21°C, set the Home

Event to occur 17 minutes before

you arrive home.

As a default, values have been

programmed for the Wake and

Sleep times and temperatures for

all 4 zones, for all 7 days.

Wake: 21.0°C (70.0°F), 6:00AM

Sleep: 18.0°C (64.0°F), 11:00PM

!NOTE: There are no initial set-

tings for Home and Away events.

To change these values there is a

program function which will guide

you through the adjustment/set

up of the these values for a single

day or group of days, or multiple

Product Overview

zones.

!NOTE: You do not need to

have settings for all events. An

event can be skipped by entering

--:-- for the time entry. (Increase

time to 11:59pm/23:59, the next

number will be --:-- before it con-

tinues to 12:00am/00:00.)

Wall Setter Installation

Site Selection for Installation

When choosing a location for the

Multi-zone Controller a conve-

nient and accessible location

should be chosen. The range of

the Controller is approximately 50

feet (15 m).

The Multi-zone Controller

can control multiple Dimplex

CONNEXTM heaters outside of the

50 ft (15 m) range by ensuring

that subsequent components in

the system are within 15m (45ft)

of any other component in the

system for the entire system to

operate.

Remove the Multi-zone Con-1.

troller and installation hard-

ware from its package.

Remove the Insulating Strip2.

as shown in Figure 1.

Using the Wall Mounting3.

Bracket, mark and drill the

holes for the wall anchors.

Install the screws through the4.

Wall Mounting Bracket and

into the anchors.

!NOTE: Ensure that the at

side of the Wall Mounting Bracket

is against the wall and the screws

are installed so that they rest

against the extended portion of

the hole. The space will allow

screws to sit in the mounting

holes correctly.

Slide the Wall Setter onto the5.

screws.

Figure 1

Battery Strip

Mounting

Holes

Figure 2

Wall Anchor

Screw

Wall Mounting

Bracket

8 www.dimplex.com

Figure 3 - Full Touch Screen Display

A D

A. Day Icons

B. Event Icons

C.Zone Icons

D.Synchronization Icon

E. Low Battery Icon

F. Lock Icon

G.Check Icon

H.24 Hour Icon

I. Program Icon

J. Hold Icon

K. Set up Icon

L. Go Back Icon

M.Temperature Display

N.Time Display

Initial Set Up

Once the Battery strip has been

removed from the unit the Set up

program will begin. The initial set-

up includes: Day, Type of Clock

(12hr or 24hr), Current Time and

Temperature Measurement Pref-

erence.

CAUTION: Always press the

icons with a blunt object. Sharp

objects like pen and pencil points

may damage the touch screen.

Select the current day of the1.

week, by pressing the icon on

the screen.

!NOTE: As each selection

is made, the selected icon will

become solid and the Check Icon

will appear to move to the

next option.

Press the Check Icon2. to

save selection.

The default type of clock3.

is a 12hr, the clock can be

changed to a 24hr, by press-

ing the icon. (To revert

back, press the icon.)

Using the4. and icons,

you can then set the time.

!NOTE: If the button is held

down for longer the time will

increase faster.

!NOTE: If you notice that the

wrong day has been selected you

can press the Go Back Icon to

revert to the previous screen.

Press the Check Icon5. to

save selection.

The °C icon will begin to flash6.

as the default. To switch to °F,

press the flashing °C.

Once the day, time and7.

temperature preference have

been set, press the Check

Icon to go into operation

mode.

!NOTE: If the time needs to be

adjusted, after this set up, you

can press and hold the time dis-

play for 3 seconds, to go into the

time adjustment mode or press

set up to adjust all of the settings.

!NOTE: At any time holding

down the temperature set point

will toggle the temperature mea-

surement preference.

Initial Set Up

10 www.dimplex.com

Program Set up "Quick Set"

The program function guides the

user through the set up for each

of the time settings (Wake, Away,

Home and Sleep) based on the

selected zones to set the desired

temperatures.

!NOTE: It is recommended that

the main overall general program-

ming be done rst - i.e. Bedrooms

during the work week and pro-

gram the entire day, then perform

another set up for another zone to

speed up the programming. After

the main programming is com-

plete, ne tuning can be done on

a single day, zone or event basis.

!NOTE: There is a blank setting

table at the back of this manual to

assist with ensuring that all of the

required events and zones have

been set up to the desired times

and temperatures.

CAUTION: Always press the

icons with a blunt object. Sharp

objects like pen and pencil points

may damage the touch screen.

Press the1. icon to start

the set up. The rst setting

will be for the Wake Event

. The zone icons will

begin to ash.

!NOTE: At any time pressing

the icon will return to the previ-

ous step. If the icon is held for

3 seconds it will return to the main

operating screen.

Select the zone(s) that the2.

settings are going to be ap-

plied.

!NOTE: As each zone is se-

lected it will become solid and the

remaining zones will continue to

ash.

Press the3. icon.

The day icons will begin to4.

ash.

Select the days that the set-5.

tings are going to be applied.

!NOTE: As each day is se-

lected it will become solid and the

remaining days will continue to

ash.

Press the6. icon.

Using the7. and icons on

either side of the time set-

ting, set the time for the Wake

event to occur.

Press the8. icon.

Using the9. and icons on

Program Schedule Set up

Andere Handbücher für CX-MPC

Inhaltsverzeichnis

Andere Dimplex Fernbedienung Handbücher

Dimplex

Dimplex RC3215 Bedienungsanleitung

Dimplex

Dimplex Integrated On/Off Remote Bedienungsanleitung

Dimplex

Dimplex DPCRWS Series Bedienungsanleitung

Dimplex

Dimplex DPCRWS Series Bedienungsanleitung

Dimplex

Dimplex 7206620100R02 Bedienungsanleitung

Dimplex

Dimplex Midline Remote Bedienungsanleitung

Dimplex

Dimplex MULTIFIRE DF3215 Bedienungsanleitung

Dimplex

Dimplex DPCRWS Series Bedienungsanleitung

Dimplex

Dimplex Multi-function Remote Control Bedienungsanleitung

Dimplex

Dimplex BFRC-KIT Bedienungsanleitung

Dimplex

Dimplex WRCPF-KIT Bedienungsanleitung

Dimplex

Dimplex WRCPF-KIT Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung