Page 3/4
Routing (TP line RF line)
Group telegrams
Block: No group telegrams are routed to the RF
line.
Route: All group telegrams are routed to the RF line
independent of the filter table. This setting is
for test purposes only.
Filter: The filter table is used to check whether or
not the received group telegram should be
routed to the RF line.
Individual addressed telegrams
Block: No individually addressed telegrams are
routed to the RF line.
Route: All individually addressed telegrams are
routed to the RF line. This setting is for test
purposes only.
Filter: The individual address is used to check
whether the received individually addressed
telegram should be routed to the RF line.
System broadcast telegrams
Block: No received system broadcast telegrams are
routed to the RF line.
Route: All received system broadcast telegrams are
routed to the RF line.
Broadcast telegrams
Block: No received broadcast telegrams are routed
to the RF line.
Route: All received broadcast telegrams are routed
to the RF line.
Acknowledge (ACK) of group telegrams
Always: A acknowledge is generated for every re-
ceived group telegram (from the TP line).
Only if routed: A acknowledge is only generated for re-
ceived group telegrams (from the TP line) if
they are routed to the RF line.
Acknowledge (ACK) of individual telegrams
Always: A acknowledge is generated for every re-
ceived individual addressed telegram (from
the TP line).
Only if routed: A acknowledge is only generated for re-
ceived individually addressed group tele-
grams (from the TP line) if they are routed to
the RF line.
Routing (RF line TP line)
Group telegrams
Block: No group telegrams are routed to the TP
line.
Route: All group telegrams are routed to the TP line
independent of the filter table. This setting is
for test purposes only.
Filter: The filter table is used to check whether or
not the received group telegram should be
routed to the TP line.
Individually addressed telegrams
Block: No individually addressed telegrams are
routed to the TP line.
Route: All individually addressed telegrams are
routed to the TP line. This setting is for test
purposes only.
Filter: The individual address is used to check
whether the received individually addressed
telegram should be routed to the TP line.
System broadcast telegrams
Block: No received system broadcast telegrams are
routed to the TP line.
Route: All received system broadcast telegrams are
routed to the TP line.
Broadcast telegrams
Block: No received broadcast telegrams are routed
to the TP line.
Route: All received broadcast telegrams are routed
to the TP line.
Management telegrams
Ignore: The received management telegram from
the RF line will be ignored.
Accept: The received management telegram from
the RF line will be accepted.
Repetition of group telegrams
Disabled: The received group telegram is not resent to
the TP line in case of a fault.
Enabled: The received group telegram is resent up to
three times in case of a fault.
Repetition of individual addressed telegrams
Disabled: The received individually addressed tele-
gram is not resent to the TP line in case of a
fault.
Enabled: The received individually addressed tele-
gram is resent up to three times in case of a
fault.
