2. User Functions
2.1 How to turn your DIRECTUS GPS NAVIGATION Mirror On and Off
•Press and hold Power Button for 1 to 2 seconds, the unit will power on.
•Press and hold Power Button for 1 to 2 seconds again to turn the mirror off.
•(Pressing the button for less than 1 to 2 seconds, user will hear a beep followed by the device
switching to the VIDEO 2 input.)
2.2 Indication Light Functions
•The Lights will be illuminated on the face of the buttons when the mirror is powered on.
•Pairing indication button will blink while pairing your Bluetooth enabled phone.
•When your Bluetooth enabled phone has paired successfully the light will stay illuminated.
2.3 Start-up Instructions
•During the start-up process only the Power Button is active.
•Once the mirror has completely powered on all other buttons will now be active.
•Reverse camera is not active until mirror is at main screen
2.4 GPS Antenna
•The DIRECTUS GPS NAVIGATION hardware receives its GPS signal from satellites.
•These GPS signals are strongest in an unobstructed view of the sky.
•Obstructions like tall buildings, bridges, trees, and tunnels will weaken and in some cases block
the signal completely.
•If this happens you should move the car to a place with a clear view of the sky and wait
approximately 1-5 minutes to re-establish the signal.
•For a stronger signal, please make sure the antenna on the backside of mirror is open to a 90
degrees position.
•DO NOT attach, hang, or stick anything onto the GPS antenna.
2.5 Touch Screen Pre-cautions
•The touch screen is made from a special electronic-resistance material, and is very sensitive to
temperature, humidity, and pressure.
•In order to keep the touch screen ingood working condition, user should not operate in extreme
temperatures.
•DO NOT USE sharp objects on the touch screen, this could scratch the screen and reduce the
visibility of the image.
•DO NOT clean the case of the mirror or the touch screen surface with water, organic solvent or
ammonia-based solvent such as window cleaner. Please use a special-purpose micro-fiber cloth
to clean the mirror and touch screen.
•Please use the calibration tools under Settings Menu to adjust the calibration of the touch screen.!
2.6 Environmental Precautions
•Avoid operating the mirror in extreme temperatures.
•DO NOT place any other electronic devices close to the mirror in order to avoid any interference.
