Disc Makers ReflexMax1 Bedienungsanleitung

1-888-800-4041 www.discmakers.com T

ReflexMax1 User Guide

Version 2.1

1-888-800-4041 www.discmakers.com T

tion contained herein are the property of Disc Makers. No part of this document

may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language in any form or by any

means, electronic, mechanical, magnetic, optical, chemical, manual, or other-

wise, without the express written permission of Disc Makers.

DISCLAIMER

Disc Makers makes no representation or warranties with respect to the con-

tents of this document and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, Disc Makers

reserves the right to revise this publication without obligation of Disc Makers

to notify any person or organization of such revision or changes.

REVISION HISTORY

Revision Date Description

1.0 10/31/2003 Updates by Disc Makers Technical Staff

2.1 01/05/2005 Updates by Disc Makers Technical Staff

CONTACTING DISC MAKERS, USA

Disc Makers

7905 North Route 130

Pennsauken, NJ 08110-1402

1-888-800-4041

TRADEMARK NOTICES

All product names are trademarks or registered trademarks of their respective

owners. Disc Makers and the Disc Makers logo © Disc Makers.

WELCOME

Congratulations on the purchase of your Disc Makers Reflex duplication sys-

tem. This sturdy unit has been professionally designed and manufactured

under strict quality guidelines to provide you with years of dependable and

trouble-free operation. Please be sure to read this instruction guide thoroughly

before operating the unit.

TECHNICAL SUPPORT

Disc Makers backs your duplicator purchase with free lifetime technical sup-

port. Tech support hours are from 9:00 a.m. to 6:00 p.m. EST Monday through

Friday at 1-888-800-4041. Or you can email our tech support team at:

techsupport@discmakers.com. For FAQs, downloadable manuals, product

updates, and warranty registration, go to www.discmakers.com/support. To

chat live online with a Disc Makers technical support specialist, go to www.dis-

cmakers.com/support.

WARRANTY

Disc Makers warrants to the original purchaser that the duplication equipment

you have purchased is free from defects in materials and workmanship for a

period of one year. This warranty is applicable when the warranty registration

has been completed and returned to Disc Makers within a reasonable period of

time following the purchase. This warranty is not transferable.

This warranty does not apply to malfunctions caused by misuse, negligence,

accident, or alteration. Disc Makers is not responsible for or liable for conse-

quential damages related to the use or misuse of this equipment. Disc Makers’

liability under this warranty extends solely to the obligation to repair or replace

a covered product. Disc Makers’ liability under this warranty shall not exceed

the cost of the covered product.

WARRANTY REPAIR

Any item that needs to be returned for a warranty repair must be returned in

original packaging. You must call Disc Makers for a return authorization number

(RMA) before returning any product. In the event that the original packaging

has been discarded, you can purchase replacement packaging from Disc

Makers. The sender will be responsible for any damage incurred if product is

not returned in original or replacement packaging. To obtain replacement pack-

aging, call Disc Makers technical support at 1-888-800-4041 with the model of

your duplicator.

PIRACY

The copying of audio, video, or software without the permission of the copy-

right holder is illegal. Disc Makers accepts no responsibility for the copyright

use or misuse of this equipment. It is the sole responsibility of the user to

ensure that the legal rights of the copyright owners are respected.

1-888-800-4041 www.discmakers.com T

Warranty

NEED BLANK MEDIA OR SUPPLIES?

Disc Makers offers a range of top-quality blank CD-Rs, DVD-Rs, and DVD+Rs at

unbeatable prices, including our own Disc Makers Ultra brand. We also have an

extensive line of CD and DVD packaging and mailing supplies, as well as inkjet

cartridges and other peripherals for your duplication and printing system. For

the latest products and lowest prices, shop securely online at

www.discmarket.com, or call 1-888-800-4041.

CUSTOM PRINTING ON BLANK CD-RS

AND DVD-RS— IN JUST 5 DAYS!

Disc Makers gives you the same high-quality silk screen

technology on your blank media that we use on our pro-

fessionally replicated discs. Call 1-888-800-4041, or go

to www.discmakers.com for details and pricing.

HAVE A CD OR DVD PROJECT THAT’STOOBIG

FOR DUPLICATION?

With our state-of-the-art replication and printing facilities, no order is too small

or too large. Our turnkey packages make shopping for the right CD or DVD pack-

age a snap. We offer hard-to-find packaging options in small or large quantities,

or we’ll create a custom package to fit your needs. And fast turn times are our

specialty. Many of our complete CD-ROM packages are ready in just 7 working

days! No one does it faster. Call your Disc Makers product specialist at

1-800-237-6666, or go to www.discmakers.com for complete information

and package pricing.

1-888-800-4041 www.discmakers.com T

Services

The ReflexMax1 is a high performance CD-R one-to-one disc duplicator

designed for both the novice and professional user. The ReflexMax1 is

designed for a variety of applications that require the exchange of audio,

video or data content. The following is a User Guide that outlines the menu

commands of the unit and immediate functions of the unit. For additional

technical support please call 1-888-800-4041.

GETTING STARTED

Carefully remove the ReflexMax1 CD-R duplicator from its shipping container.

Please inspect the contents and verify them against the packing slip. Be sure

to report any errors in shipping immediately to Disc Makers.

Packing materials: Please save the original box and packaging in the event the

unit requires future service or you need to move the unit from one location to

another. This will help reduce the possibility of damage in transit.

Please Note: Any item that needs to be returned for a warranty repair must be

returned in original packaging.

INSTALLATION AND SETUP

1. Unpack the ReflexMax1 and place the unit in a clean and cool work area.

Keep the external packaging for future storage and transportation.

2. Place the ReflexMax1 on a flat, clean, and dust-free surface.

3. Connect the power cord from the back of the unit to an electrical outlet. Do

not bypass the Ground.

4. The Front panel should appear as below.

FUNCTIONS

1. COPY

1. Power on the system by pressing the button on the lower right front of the

unit. You will then see the system initializing and performing a self test on

the front panel LCD. The LCD will display Detect Drives, and then switch to

Copy mode.

2. To begin the duplication operation, load the top drive (reader) with a master

CD. Load the lower drive (writer) with high-quality CD-R media.

3. Press the ENT button to begin duplicating. The unit will automatically ana-

lyze the master disc (this may take a few moments) and begin duplicating

at the maximum recording speed.

4. The LCD will display OK when the duplication is complete and the number of

successfully copied discs. (See screen display below.) Upon successful

duplication the copied disc will be ejected. If the duplication fails, the disc will

remain in the bottom drive until the eject button on the drive is pressed.

To continue the same duplication job; reload the writer drive with another

blank CD-R and press the ENT button to start duplicating again. To start a

new duplication job, place a new master CD in the top reader drive.

2. TEST

The Test Function is used to check whether a disc will successfully copy. It

simulates the copying process. When concluded no data will be written to

media writer drive.

1. Select the Test Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank CD-R media.

1-888-800-4041 www.discmakers.com T

Getting Started

Copy

OK: 01

3. Press the ENT button to start the duplication process. The unit will analyze

the master disc and the source disc. This may take a few minutes.

Upon successful testing, the following will display on the LCD.

If the blank target CD-R in the writer drive has already been written to, or is

damaged and cannot be written to, the LCD will display the message: Target

Drive Not Ready. If the data on the master CD will not fit on the blank target CD,

the LCD display will read Target Overflow.

3. TEST AND COPY

The Test and Copy Function incorporates the first two functions into one oper-

ation. It is used to check whether a disc will successfully copy and then contin-

ues on with the duplication process. First, the copy process is simulated and

then the data is copied to the blank CD-R.

1. Select the Test and Copy function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank CD-R media.

3. Press the ENT button to start the process. The unit will display Test the

Master Disc, then check the target disc, and finally copy to the blank CD.

Upon successful testing and copying the following will display on the LCD.

If the blank target CD-R has already been written to, or is damaged and

cannot be written to, the LCD will display the message Target Drive Not

Ready. If the data on the master CD will not fit on the blank target CD, then the

LCD display will read Target Overflow.

4. VERIFY

The Verify Function is used to confirm that the master and the copy read the

same after the duplication process is completed.

1. Select the Verify Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master CD and load the lower drive

(writer) with the CD-R that has been copied.

3. Press the ENT button to start the process.

Upon successful verification, the following will display on the LCD and the

copied disc will be ejected. To verify another disc place another disc in the

writer drive and press the ENT button.

If the verification was unsuccessful, the following will display:

5. COMPARE

The Compare Function takes the Verify Function one step farther—it gives

details about the master and copied disc. It also ejects the disc upon a suc-

cessful comparison.

1. Select the Compare Function using the UP and DOWN arrows.

1-888-800-4041 www.discmakers.com T

Functoins

Test

OK: 01

Test and Copy

OK: 01

Verify

OK: 01

Verify F->

Fail: 01

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank CD-R media.

3. Press the ENT button to start the Compare Process. The unit will make the

comparison and display whether the target CD comparison was OK or failed.

Upon successful comparisson, the following will display on the LCD:

Pressing the UP arrow will display whether the copied Tgt CD is identical to the

master or not, Pressing the DOWN button will show the size of the master Src

CD. Press the ENT key to display information about master Src. Then press the

ENT key to display information about the copied CD Tgt. Press the ESC key to

return to the main menu.

6. PRESCAN

The Prescan Function only looks at the master CD. This is used to verify that

the master can be read correctly without errors

1. Select the Prescan Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc.

3. Press the ENT button to start the process. The unit will make the scan and

display PreScan OK on the LCD.

7. D ISC INFO

The Disc Info Function only looks at the master CD. It will display the session

and tracks on the CD, total time of the CD and size of the CD.

1. Select the Disc Info Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc.

3. Press the ENT button to start the process. Pressing the UP and DOWN arrow

will scan through the information.

8. SELECT SOURCE

This function is used to select which drive will be the writer drive and which

will be the reader drive, changing this may render your unit inoperable. We

recomend that you do not change the drive source.

9. IMAGE

This option is not used in the ReflexMax1.

10. EDIT TRACK

The ReflexMax1 can be used to create custom audio compilation CDs. This func-

tion allows the user to take audio tracks from different CDs and compile them

to a single CD.

1. Select the Edit Track Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high quality blank CD-R media.

3. Press the ENT button once to see the main screen for this function, 10-01

Edit Track CD to CD Edit. Press the ENT button again to see the following

screen:

4. Press the UP or DOWN arrow to change the track in view. To select a track to

copy to the blank disc press the ENT key. A +will appear next to the track in

view. In the following example, track 5 is in view and is selected for copying.

More than one track can be choosen from a CD, but they will be recorded to

the blank target CD in the order in which they are on the original CD. To

change the order of play, record each track individually.

1-888-800-4041 www.discmakers.com T

Functoins

Compare OK: 01

Fail: 0 Diff: 0

Select Track:

1/31 3:18

TRACK IN VIEW

TOTALTRACKSONDISC

TIME OF TRACK 1

Select Track:

+5/31 2:41

5. After selecting a track to copy, press the UP arrow until End appears. In this

example, one track is selected and the time for this track is 2:41. If four

tracks were selected, the screen would show 4 Trk and give the total time for

all four tracks.

6. Press the ENT button and the Reflex 1 will ask if all the selections are made

for this CD. Use the UP or DOWN arrow to change between Yes and No.

Pressing ENT with No on the LCD will take the user back to Select Track.

Pressing ENT with Yes on the screen will start the copying of the track (or

tracks) to the blank target CD.

7. When the copying is complete the unit will display Burn Complete! OK: 01.

Press the ENT button. The LCD will display Continue edit next Disc? NO. To

change to another CD, load the top drive (reader) with another master disc.

Press the UP arrow to change the No to Yes and press ENT. This will take you

to the screen from step 3. Repeat steps 3 through 6 to put additional tracks

on the blank target CD.

8. When there are no more tracks to write to the CD leave the Continue

edit next Disc? NO set to No and press the ENT key again. The following

screen will appear:

Press ENT and the ReflexMax1 will close the CD. Once the CD is closed, you

cannot copy any additional tracks to the disc.

Note: the Edit Track CD to CD Edit is the only function enabled for the Reflex 1 in

the Edit Track section.

11. SETUP

The Setup Function allows you to specify specific parameters for copying CDs.

There are 16 sub items. From the main menu screen pressing ENT will show

the sub heading. Pressing the UP and DOWN arrows allows the user to move

between the settings.

1. Language: allows the user to set English or Spanish as the display language.

2. Burn Speed: allows the user to change the speed at which the unit burns a

CD. By pressing the ENT button the current setting will be displayed. The

user can then press the UP and DOWN arrows to change to the desired

speed. Pressing the ENT button will set the speed. Press ESC to go back to

the main menu.

3. Read Speed: allows the user to change the speed at which the unit reads a

master CD. By pressing the ENT button the current setting will be displayed.

The user can then press the UP and DOWN arrows to change to the desired

speed. Pressing the ENT button will set the speed. Press ESC to go back to

the main menu.

4. Auto Start Drive set to On will start a copy function as soon as blank media

is detected in the writer drive. The default setting is Off.

5. Startup Menu allows the user to have the ReflexMax1 start up to any of the

first seven options in the main menu.The default setting is Copy.

1-888-800-4041 www.discmakers.com T

Functoins

Select Track:

End 1 Trk 02:41

End edit disc

and burn? YES

Close all discs

session? YES

6. Auto Verify set to On will do a verify after every copy is made. The default

setting is Off.

7. Auto Compare set to On will do a comparison after every copy is made. The

default setting is Off.

8. Auto Prescan set to On will do a prescan on every CD placed in the reader

drive. The default setting is ‘ Off.

9. Eject Disc allows the user to choose what will happen at the end of function.

The three choices are: Eject Good Only, Eject All Disc, and Do Not Eject. The

eject option is only available on the Copy, Test and Copy, Verify, and

Compare functions.

10. Burn on the Fly is not used in the ReflexMax1.

11. Burn Mode allows the user to choose Disc-at-Once or Track-at-Once for the

burn function. The default setting is DAO Disc-at-Once.

12. Button Sound set to On will cause any pressing of the control buttons to

make a sound. The default setting is On.

13. Device Info has information on the writer and reader drives.

14. System Info has information on the controller of the ReflexMax1.

15. Quick Erase erases the TOC of CD-RW disc.

16. Full Erase erases all the data on a CD-RW.

Functoins

1-888-800-4041 www.discmakers.com T

Andere Handbücher für ReflexMax1

Inhaltsverzeichnis

Andere Disc Makers Disc-Duplikator Handbücher

Disc Makers

Disc Makers ReflexUltra Bedienungsanleitung

Disc Makers

Disc Makers ReflexMax1 Bedienungsanleitung

Disc Makers

Disc Makers ElitePro Bedienungsanleitung

Disc Makers

Disc Makers EliteMicro Montageanleitung

Disc Makers

Disc Makers MacElite 2 Bedienungsanleitung

Disc Makers

Disc Makers reflex series Bedienungsanleitung

Disc Makers

Disc Makers ReflexMax1 Bedienungsanleitung

Disc Makers

Disc Makers ReflexFlash11 Bedienungsanleitung

Disc Makers

Disc Makers Reflex 1 Bedienungsanleitung

Disc Makers

Disc Makers ReflexUltra Bedienungsanleitung

Disc Makers

Disc Makers Pico MAC Bedienungsanleitung

Disc Makers

Disc Makers ReflexAuto 8 Bedienungsanleitung

Disc Makers

Disc Makers Forte Bedienungsanleitung

Disc Makers

Disc Makers ReflexUltra Bedienungsanleitung

Disc Makers

Disc Makers MacElite 2 Bedienungsanleitung

Disc Makers

Disc Makers Flash Duplicator Bedienungsanleitung

Disc Makers

Disc Makers ReflexMax1 Bedienungsanleitung

Disc Makers

Disc Makers Autograph Autograph VII Installations- und Betriebshandbuch

Disc Makers

Disc Makers ElitePro1 Handbuch

Disc Makers

Disc Makers reflex series Bedienungsanleitung

Disc Makers

Disc Makers EliteMicro Montageanleitung

Beliebte Disc-Duplikator Handbücher anderer Marken

Riso

Riso CV Series Handbuch

MicroBoards Technology

MicroBoards Technology GX-2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies HDUS325DX Bedienungsanleitung

Carry

Carry Pro118 Bedienungsanleitung

CopyPro

CopyPro PowerPro II Bedienungsanleitung

Primera

Primera Max Bedienungsanleitung

Logicube

Logicube EchoPlus-NG Bedienungsanleitung

Silca

Silca Delta 2000 SA Bedienungsanleitung

Reflex7

Reflex7 Daisy Chain Series Bedienungsanleitung

Vinpower Digital

Vinpower Digital SharkCopier DC Bedienungsanleitung

Codonics

Codonics Virtua E Bedienungsanleitung

Octave

Octave Copy Master II Bedienungsanleitung

Kanguru

Kanguru U2-DVDDUPE-S Bedienungsanleitung

StarTech.com

StarTech.com 8STSATDUP11 Bedienungsanleitung

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Bedienungsanleitung

Addonics Technologies

Addonics Technologies UDFH7 Bedienungsanleitung

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Bedienungsanleitung

Addonics Technologies

Addonics Technologies CFASTD5 Bedienungsanleitung