Dish Network 40.0 Bedienungsanleitung
Remote User Guide
Safety Instructions
You must keep safety in mind while using this device. Keep
these and any other instructions for future reference.
Observe Warnings: Carefully follow all warnings on the device
and in the operating instructions.
Heat: Do NOT place the device near heat sources such as
radiators, stoves, heat registers, or other appliances that
produce heat.
Care and Use
Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol
cleaners. Use a damp cloth for cleaning.
When Not in Use: Remove the batteries if this device is to be
left unattended or unused for a long period of time.
Refer servicing to qualied personnel when a
solid object or liquid has fallen onto or into the
device.
Do NOT attempt to service this device. Refer all
servicing to qualied personnel. Opening covers
other than the battery cover will void the warranty.
Publishing Information
Copyright © 2011. EchoStar Technologies L.L.C., Englewood,
Colorado 80112. All rights reserved.
The information in this User Guide may change without notice.
Revisions may be issued to tell you about such changes.
Send comments or questions about this User Guide to
techpubs@echostar.com or
Technical Publications, EchoStar Technologies L.L.C,
90 Inverness Drive Circle East, Englewood, Colorado 80112.
Document Number: 188891
Printed in
DISH Network is a registered trademark of
DISH Network L.L.C.
All product names, trade names, or corporate names
mentioned in this User Guide are acknowledged to be the
proprietary property of the registered owners.
1
Conguring the 40.0 Remote
1
2
3
4
Conrm your remote has the
green number 1 key installed.
Pull the remote battery cover off.
If your remote has a blank,
black key, continue to Insert the
Batteries on page 2.
Separate the key from the
remote by inserting your
thumbnail or a coin in the crease.
Remove the key by grasping at
the bottom.
Insert the key face up and slide
into place.
5
Note: If you are using the green TV1 key that comes
installed in your remote, skip these steps. Go to Insert
the Batteries (page 2).
2
Insert the Batteries
Pull the remote battery cover
off.
Insert 4 AAA batteries,
making sure to match the
plus (+) ends with the plus
markings on the battery case.
Replace the remote battery
cover.
1
2
3
3
Using System Wizard
Use System Wizard initially to set up the remote
to work with the receiver. System Wizard can also
store/restore the settings for your XiP system in both
your remote control’s memory and on the receiver.
This feature is helpful if you ever need to program a
replacement remote or a new system.
Note: If your batteries are low, replace them before
beginning.
Press and hold 0 until
System Wizard message
appears. Make sure the
remote and receiver are in
line of sight.
Or, Press MENU, select
Remote Control, and then
select System Wizard.
If rst time in System
Wizard, follow instructions
provided.
Follow the on-screen
options to Backup or
Restore setting for your
XiP system and remote
control settings.
Select Continue to return
to your paid programming.
1
2
3
4
OR
4
Linking Remote to Receiver
Verify the antenna
is installed on the back
of the receiver.
Turn your receiver and
TV on, and press
SYSTEM INFO on the
front panel of the receiver.
Conrm that you
see the System
Info screen.
Press and release SAT
on your remote. Wait until
you hear a tone and see
the remote listed on the
screen.
Conrm that your remote
operates your receiver by
pressing remote buttons.
If this is not working, go
back to step 4.
3
2
1
4
5
Use these instructions
to link the remote
to the receiver if
your receiver does
not support System
Wizard.
REMOTE
ANTENNA
SYSTEM
INFO
5
SAT Mode
To use the features described in this section, make sure you
are in SAT mode by pressing the SAT Mode button.
Note: Some features may not be available depending on your
receiver model.
SAT
Power & TV Power
Top button turns the receiver on/off
Bottom button turns the TV on/off
Volume and
Mute Buttons
Control TV
volume
Programming
required
Recall
Return to last TV
channel viewed
Picture-In-
Picture (PIP)
Buttons
Watch two
separate
programs at
same time (in
Single Mode)
Number Buttons
Enter a channel
number or navigate
through menus
Menu
Access receiver
features and
settings
Pair/Input
Press once for
Input. Press and
hold for Pair
Themes
Search for
programs
using Themes
Info
Retrieve info
on programs
Search
Search for a
program
Shortcut Keys
Access
frequently
used features
Digital Video
Recorder (DVR)
Buttons
Pause live TV and
play or record
programming
Format
Format the
picture to the
desired width
to match the
program you
are viewing
System Wizard
Press and hold to
x remote control
issues and sync
data
Arrow/Select
Buttons
Channel up/down,
navigate through
menus, and select
a desired option
View Satellite
Programming
Exit out of any
menu/guide and
return to viewing
live TV
Cancel
Return to previous
menu or to watch
a program
Browse
See what is on
other channels
while watching TV
Program Guide
Display current
and future satellite
program listings
Page Buttons
Page up/down
in menus
Press this
button for
SAT Mode
Dish OnDemand
Explore interactive
TV features
6
TV Mode TV
To use the features described in this section, make sure
you are in TV mode by pressing the TV Mode button.
Remote programming is required. Note: Some features
may not be available depending on your receiver model.
Note: Remote operation is different on DISH Network TVs.
See your DISH Network TV User’s Guide for proper operation.
Power & TV Power
Top button turns
the TV on/off
Bottom button
turns the TV on/off
Press this button
for TV Mode
Mute
Turn TV volume
on or off
Recall
Return to last TV
channel viewed
Picture-In-Picture
(PIP) Buttons
Watch two separate
programs at same
time (in Single
Mode)
Number
Buttons
Enter a channel
number or
navigate
through menus
TV Menu
Access menu
features available
on some TVs
Pair/Input
Switch between
TV inputs
(available only for
certain makes and
models of TVs)
Up/Down
Arrow Button
Channel up/
down on the TV
Volume
Control TV
volume
Select Button
Select a program
or menu
7
DVD Mode DVD
Power & TV Power
Top button turns the
DVD/VCR/BD on/off
Bottom button
turns the TV on/off
Number Buttons
Enter a channel
number or
navigate through
menus
Pair/Input
Press once
for Input
Press and
hold for Pair View Satellite
Programming
Exit out of any
menu/guide
and return to
viewing live TV
Press this button
for DVD Mode
FWD
Forward a
videotape or
DVD
Play
Play a videotape
or DVD
Pause
Pause a
videotape or
DVD
Back
Rewind a
videotape
or reverse a
DVD
Stop
Stop playing
a DVD, stop
playing or
recording a
videotape
Record
Record on a
videotape
To use the features described in this section, make sure you
are in DVD mode by pressing the DVD Mode button. You
can use this mode to operate a Blu-ray disc player or VCR.
Remote programming is required. Note: Some features
may not be available depending on your receiver model.
8
DVR Functions
• Press twice to go to the list of recorded
programs.
• Plays a live or recorded program.
• Pauses a live or recorded program.
• Stops recording a program.
• Records a program.
• Press BACK once to reverse the program
four times as fast as normal play. Press
BACK twice to reverse at 15 times normal
speed, three times to reverse at 60 times
normal speed, and four times to reverse
at 300 times normal speed. The on-
screen bar shows how far you’ve gone.
For a live program, you can only reverse
back to the last channel change or back
one hour, whichever occurs rst.
• Press SKIP BACK to skip back about 10
seconds in a program.
• Press FWD (Forward) once to fast-
forward through the program four times
normal speed. Press FWD twice to
forward at 15 times normal speed, three
times to forward at 60 times normal
speed, and four times to forward at 300
times normal speed. The on-screen bar
shows how far you’ve gone. Of course,
you cannot forward into the part of a
live program that has not been broadcast.
Andere Handbücher für 40.0
2
Inhaltsverzeichnis
Andere Dish Network Fernbedienung Handbücher
Dish Network
Dish Network 301 IR 123271 Bedienungsanleitung
Dish Network
Dish Network Hopper with Sling Bedienungsanleitung
Dish Network
Dish Network 54.0 Bedienungsanleitung
Dish Network
Dish Network Remote Control Bedienungsanleitung
Dish Network
Dish Network Platinum 121716 Bedienungsanleitung
Dish Network
Dish Network 159263 Bedienungsanleitung
Dish Network
Dish Network 20.1 Bedienungsanleitung
Dish Network
Dish Network Duo ViP 222 Gebrauchs- und Wartungshandbuch
Dish Network
Dish Network Digital PVR Bedienungsanleitung
Dish Network
Dish Network Duo ViP 222 Bedienungsanleitung
Dish Network
Dish Network DISHPlayer 500 Bedienungsanleitung
Dish Network
Dish Network Platinum Plus 121150 Bedienungsanleitung
Dish Network
Dish Network 167820 Bedienungsanleitung
Dish Network
Dish Network Platinum Remote Control Bedienungsanleitung
Dish Network
Dish Network 40.0 Bedienungsanleitung
Dish Network
Dish Network 176842 Bedienungsanleitung
Dish Network
Dish Network 40.0 Bedienungsanleitung
Dish Network
Dish Network 52.0 Bedienungsanleitung
Dish Network
Dish Network EZ Bedienungsanleitung
Dish Network
Dish Network Platinum PVR Remote Control Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
