Dixell ICHILL IC205D EVO Bedienungsanleitung

QUICK REFERENCE GUIDE

IC200D EVO

(rel. 1.0)

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 2/42

INDEX

1. GENERAL WARNING ...................................................................... 5

1.1 Please read before using this manual .............................................. 5

1.2 Safety Precautions............................................................................ 5

1.3 PRODUCT DISPOSAL (WEEE) .................................................................... 6

2. USING THE QUICK REFERENCE GUIDE............................................. 6

3. IC200 D TABLE OF THE FEATURES ................................................... 7

4. USER INTERFACE............................................................................ 8

4.1 MEANING OF THE LEDS ............................................................................ 8

4.2 DISPLAY AND ICONS ................................................................................. 8

5. DISPLAY LAYOUT ......................................................................... 10

6. OTHER DISPLAY INFORMATION.................................................... 10

6.1 READ THE SET POINT VALUE .................................................................. 10

6.2 MODIFY THE SET POINT .........................................................................11

7. KEY FUNCTION............................................................................. 11

7.1 KEY COMBINANTION.............................................................................. 12

8. FIRST INSTALLING ........................................................................ 12

8.1 ON BOARD CLOCK (OPTIONAL) .............................................................. 12

8.2 RTC Setup ............................................................................................... 13

9. PARAMETERS PROGRAMMING WITH THE “HOT KEY 64” ............. 13

9.1 HOW TO PROGRAM AN INSTRUMENT WITH AN ALREADY

PROGRAMMED “HOT KEY” (DOWNLOAD)......................................................... 13

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 3/42

9.2 HOW TO COPY THE PARAMETER MAP INTO THE “HOT KEY” (UPLOAD)

10. PROGRAMMING USING THE KEYBOARD .................................... 14

10.1 ENTER THE PROGRAMMING LEVEL PR1................................................. 14

10.2 ENTER THE PROGRAMMING LEVEL PR2................................................. 14

10.3 ENTER THE PROGRAMMING LEVEL PR3................................................. 14

11. MENU ( MENU KEY)................................................................... 15

11.1 ALARM LIST: READ AND RESET............................................................... 15

11.2 ALARM LOG LIST..................................................................................... 16

12. REMOTE KEYBOARD VI622 AND TI620 ....................................... 16

13. REMOTE KEYBOARD V2I820 ...................................................... 17

13.1 PROBES VISUALIZATION ......................................................................... 19

13.2 SET POINT VISUALIZATION / MODIFICATION......................................... 19

13.3 ALARM VISUALIZATION.......................................................................... 20

14. TABLE OF THE OUTPUT STATUS IN ALARM CONDITION .............. 21

14.1 ALARM: “A” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM...... 21

14.2 ALARM: “B” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM ......24

14.3 ALARM: “C” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM ...... 25

14.4 WARNING ............................................................................................... 25

15. BLACK-OUT ............................................................................... 25

16. WIRING CONNECTIONS ............................................................. 26

16.1 IC205D CONNECTIONS ........................................................................... 26

16.2 207D CONNECTIONS .............................................................................. 27

16.3 REMOTE KEYBOARD CONNECTION ........................................................ 28

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 4/42

16.4 Analog Inputs NTC – PTC Probes............................................................ 29

16.5 digital inputs........................................................................................... 30

16.6 Analog Input for Pressure Transducer (4 ÷ 20mA signal)....................... 31

16.7 Analog Input for Pressure Ratiometric Transducer Ppr30 (0 ÷ 5V signal)

16.8 PWM Output for Condensing Fan Speed Control (only for OUT2 and

OUT3) 32

16.9 Proportional Output For Fan Condensing Control or FOr Compressor

Inverter Controlled or For Auxiliary Outputs..................................................... 33

16.10 proportional output 0..10v to control dumper motors....................... 34

16.11 Proportional outputs configured for aux relay control ....................... 36

17. INSTALLING AND MOUNTING.................................................... 36

17.1 MECHANICAL DIMENSIONS.................................................................... 36

17.2 VI622 PANEL CUT-OUT ........................................................................... 38

17.3 TI620 PANEL CUT-OUT ........................................................................... 39

17.4 V2I820 PANEL CUT-OUT ......................................................................... 40

18. TECHNICAL SPECIFICATIONS ...................................................... 41

18.1 SUPPLY VOLTAGE ................................................................................... 41

18.2 ANALOGUE INPUTS ................................................................................ 41

18.3 DIGITAL INPUT........................................................................................ 41

18.4 ANALOGUE OUTPUTS............................................................................. 41

18.5 DIGITAL OUTPUTS .................................................................................. 42

18.6 operating and storage temperature ...................................................... 42

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 5/42

1. GENERAL WARNING

1.1 PLEASE READ BEFORE USING THIS MANUAL

This manual is part of the product and should be kept near the instrument for easy and

quick reference.

The instrument shall not be used for purposes different from those described

hereunder. It cannot be used as a safety device.

Check the application limits before proceeding.

Dixell Srl reserves the right to change the composition of its products, even without

notice, ensuring the same and unchanged functionality.

1.2 SAFETY PRECAUTIONS

Check the supply voltage is correct before connecting the instrument.

Do not expose to water or moisture: use the controller only within the operating limits

avoiding sudden temperature changes with high atmospheric humidity to prevent

formation of condensation

Warning: disconnect all electrical connections before any kind of maintenance.

The instrument must not be opened.

In case of failure or faulty operation send the instrument back to the distributor or to

“Dixell S.r.l.” (See address) with a detailed description of the fault.

Consider the maximum current which can be applied to each relay (see Technical

Data).

Separate the signal cables from the power cables in order to prevent malfunction due to

electromagnetic interference; do not use the same electrical conduit to install high

voltage cabling and low voltage cabling.

The ground connection of the secondary coil of the transformer that powers the device

can result in a bad performance; where possible, this connection should be avoided.

Fit the probe where it is not accessible by the end user.

In case of applications in industrial environments, the use of mains filters (our mod.

FT1) in parallel with inductive loads could be useful.

The symbol alerts the user of non-insulated “dangerous voltage” within the

product area that is sufficiently high to constitute a risk of electric shock to persons.

The symbol alerts the user of important operating and maintenance

(assistance) instructions found in the documentation attached to the device.

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 6/42

1.3 PRODUCT DISPOSAL (WEEE)

With reference to Directive 2002/96/EC of the European Parliament and of the Council

of 27 January 2003 and to the relative national legislation, please note that:

There lies the obligation not to dispose of electrical and electronic waste as

municipal waste but to separate the waste.

Public or private collection points must be used to dispose of the goods in

accordance with local laws. Furthermore, at the end of the product's life, it is

also possible to return this to the retailer when a new purchase is made.

This equipment may contain hazardous substances. Improper use or

incorrect disposal can have adverse effects on human health and the

environment.

The symbol shown on the product or the package indicates that the product

has been placed on the market after 13 August 2005 and must be disposed

of as separated waste.

Should the product be disposed of incorrectly, sanctions may be applied as

stipulated in applicable local regulations regarding waste disposal.

2. USING THE QUICK REFERENCE GUIDE

In this guide, there are some general guidelines regarding the product; more details are in

the full manual, to be requested from the Dixell Customer Service department.

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 7/42

3. IC200 D TABLE OF THE FEATURES

FEATURES

IC205D

IC207D

OUTPUT RELAYS



DIGITAL INPUTS

9 (free voltage)

configurable

PROBE INPUTS

4 (NTC/PTC)

configurable

3 (NTC/PTC/0..5V/4..20mA)

configurable

PROPORTIONAL OUTPUTS

2 0÷10V or PWM outputs

configurable

1 0÷10V

configurable

OTHER OUTPUTS

TTL



Output for remote keyboard



LAN



POWER SUPPLY

12 Vac/dc (+15%;-10%)



24 Vac/dc (± 10%)

opt

OTHERS

Internal real time clock

opt

Buzzer

opt

Opt = optional

= default

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 8/42

4. USER INTERFACE

4.1 MEANING OF THE LEDS

4.2 DISPLAY AND ICONS

ICON

MEANING / FUNCTIONNING

°C

°F BAR

PSI

Lighted when the display shows a temperature or pressure

Lighted when the bottom display shows the clock

Lighted during the programming parameters if it is time based

Lighted in function menu when the display shows the defrost delay

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 9/42

Alarm: blinking in case of alarm

Lighted when domestic hot water function is active

Lighted after pressing menu button

Lighted if anti freeze heaters/ integration heating / boiler are activated

Flow switch alarm / supply fan overload (air / air unit)

Water pump: lighted if at least one pump is ON

Condenser fan: lighted if at least one fan is ON

Lighted when a compressor is ON

Blinking = when the delay of activation is running

AUX

Lighted when auxiliary function is active

Lighted when the controller is ON in cooling or heating

Lighted when the Free cooling is active

Lighted when the defrost is activated

Blinking when the delay to activate the defrost is active

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 10/42

5. DISPLAY LAYOUT

Pressing Up or Down button the display shows the temperature or pressure of the main

probes configured in the instrument.

The lower display shows the label of the selected probe while the upper display shows its

value.

If the machine is configured with two gas circuits, when on the display is visualized the

condenser pressure/temperature or evaporation pressure of circuit 1, pressing SET button

the display shows condenser pressure/temperature or evaporation pressure of circuit 2.

Fig.1 Fig.2

6. OTHER DISPLAY INFORMATION

6.1 READ THE SET POINT VALUE

Press and release the SET key:

If the unit is on standby:

lower display shows SEtC (set chiller);

press SET key again, lower display shows SEtH (set heat pump, if it is enabled);

press SET key again, lower display shows SEtr (set real of operation, in the case

where the Energy Saving and / or function dynamic set point are active);

press SET key again, lower display shows SEtS (set domestic water circuit, in

case it is enabled)

If the instrument is in chiller operation:

lower display shows SEtC (set chiller);

press SET key again, lower display shows SEtr (set real of operation, in the case

where the Energy Saving and / or function dynamic set point are active);

press SET key again, lower display shows SEtS (set domestic water circuit, in

case it is enabled)

If the instrument is in chiller operation:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere dixell Controller Handbücher

dixell

dixell XWA11V Bedienungsanleitung

dixell

dixell XV110K Bedienungsanleitung

dixell

dixell XW60K Verdrahtungsschema

dixell

dixell Wing Series Verdrahtungsschema

dixell

dixell UNIVERSAL XR60CX Verdrahtungsschema

dixell

dixell XR70CX Bedienungsanleitung

dixell

dixell XR110C Verdrahtungsschema

dixell

dixell XR72CX Verdrahtungsschema

dixell

dixell Ichill 260L_D DUO Bedienungsanleitung

dixell

dixell XR30T Bedienungsanleitung

dixell

dixell UNIVERSAL XR60CX Bedienungsanleitung

dixell

dixell CX620 Verdrahtungsschema

dixell

dixell WING XW260K Verdrahtungsschema

dixell

dixell XR40D Verdrahtungsschema

dixell

dixell XR70CX Verdrahtungsschema

dixell

dixell ichill IC100C series Bedienungsanleitung

dixell

dixell XR30CX Bedienungsanleitung

dixell

dixell XLR130 Bedienungsanleitung

dixell

dixell XR01-02CX Verdrahtungsschema

dixell

dixell XW60LS Verdrahtungsschema

dixell

dixell T66 Verdrahtungsschema

dixell

dixell XC660D Verdrahtungsschema

dixell

dixell iCHiLL 100CX Bedienungsanleitung

dixell

dixell XW40K Verdrahtungsschema

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

dixell iCHILL IC205D EVO Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken